For our audience that regularly keeps track of Intel’s product portfolio, it would be hard to miss that the naming strategy of Intel’s process node technologies is a bit of a mess. To some, those words are themselves an understatement, as Intel has shifted its naming strategy 2-3 times since the launch of Intel’s first 10nm products. Not only that, even Intel’s various departments internally have a hard time keeping track of ‘what is this manufacturing process being called today’ when the press like AnandTech ask for details on the latest upcoming products.

Knowing this, and knowing what issues Intel has been having, I wanted to demystify Intel’s manufacturing process naming scheme such that users and engineers alike, even if they are inside Intel, can understand what is what but also importantly why. The why is the crucial factor.

If you're looking for a handy decoder ring for Intel's 10nm Products, it's here in page 3.

Why Do We Have Multiple Versions of a Process?

With Intel’s 14nm, we were invited to 14nm, 14+, 14++, 14+++, and if you believe Intel’s own slides, there were variants that went beyond this ++++ naming scheme. Each one of those additional + points on the end of the name signified a change in the process technology – usually to assist for increasing performance or efficiency.

Each one of these + points is an update to the BKM, or Best Known Methods.

While an engineer can draw an electrical layouts for a part of a processor, such as an addition circuit, actually applying that design to a silicon floorplan for manufacturing is a different skill altogether. Transistor libraries are designed to take advantage of a given process, and when a floorplan is optimized for a process, it can then be pasted and repeated as necessary – on top of this, simulation on thermals, power, and current density are applied to ensure that there are no hotspots or that critical paths inside the design have as few bottlenecks as possible.

When an update to the BKM occurs, two things can happen. Normally we see the update on the level of the transistor library that is changed – if the distance between two fins on a transistor increases for example, the transistor library and the macros may be made bigger, and then the floorplan might be redesigned to take account for this. As for any process node design, there are 100 different controls, and improving one might make three other controls worse, so it is a fine balancing act. Not only this, but the BKM has to be validated at the manufacturing level. The BKM update could apply to the metal stack as well, which in of itself can adjust the performance.


Lots of dials at each stage

In the long long past, BKM updates were never advertised externally. If Intel or TSMC or another foundry discovered a way to improve the performance, or decrease the voltage, or improve the yield, the update was silently rolled into the design and nothing much was made of it. Sometimes processors would be listed as ‘1.0 volts to 1.35 volts’, and it would just be a roll of the dice if a user obtained one of the lower voltage models.

However, as time between different process node updates has elongated, these BKM updates have started to be identified and effectively monetized by the semiconductor companies. An update to a process that improves the voltage by 50 millivolts and increases frequency by 200 MHz immediately becomes a productizable event, and products built on these updates can be offered for more money over the usual. Or, depending on the rate of updates, the whole next generation of products could be built on the update.

So we never saw BKM updates officially announced at Intel’s 45nm, 32nm, or 22nm process nodes. These updates were fast enough that the productization of any update didn’t warrant a full round of marketing. With 14nm, that changed.

Intel had discussed its roadmap beyond 14nm since its 2010 Investor Meeting. It predicted that the company would be on 14nm by 2013, 10nm by 2015, and 7nm by 2017. As we now know, 14nm was two years late, and 10nm was 2-4 years late. Because of the introduction of 10nm being delayed, Intel decided to productize its 14nm BKM updates, and signified those with + points.

Intel’s current official line is that there have been four updates to 14nm, creating five ‘generations’.

More Plus Means More Meme

Because of all the + points, Intel’s marketing sometimes getting it wrong, and perhaps a little bit of ‘++’ in most programming languages meaning ‘+1’, the whole concept of adding + to the process node has become a meme – a meme at Intel’s expense, purely on the basis of its failure to deliver 10nm before the 14++++ naming scheme got out of hand.

10nm Changes Direction, Twice
POST A COMMENT

142 Comments

View All Comments

  • FunBunny2 - Friday, September 25, 2020 - link

    "Intel had a problem with multiplication"

    have they gone back to the future: mult by add in a do-loop? :)
    Reply
  • Hulk - Friday, September 25, 2020 - link

    Multiplication is really just recursive addition so this makes sense. Reply
  • sharathc - Friday, September 25, 2020 - link

    A typical meeting talks at Intel:

    Engr 1: We have some improvements planned for 14++++++

    Engr 2: Aaaaaaaaam. That should be 14+++++++

    Manager 1: I lost track. How many plusses guys?

    Engr 1: That's 7 + sir.

    Engr 2: Did you say 7? (whaaaaa! he said 6 +)

    Architect: Let us dump 6 and 7 Plusses. From tomorrow, I have 14+++++++++.
    Reply
  • dotjaz - Friday, September 25, 2020 - link

    Except none of those + nodes actually shrink feature size or add a dimension, therefore changing the number makes zero sense even as a joke. Reply
  • dwbogardus - Friday, September 25, 2020 - link

    None of us are privy to exactly what each of those incremental refinements were, but they did gradually result in higher performance and/or improved yields, both of which are worthy achievements. Even though Intel's 10 nm started out poor, if they are equally persistent in their refinements, it will end up performing very well. But by then, the competition will have moved on from 7 nm to 5 nm. Intel needs to pick up the pace. How does TSMC do it so well, and so quickly? Reply
  • xenol - Friday, September 25, 2020 - link

    Process node names, at least the number, have lost their meaning anyway. Reply
  • Teckk - Friday, September 25, 2020 - link

    Nice article!
    Ian, wait until you have a Super Enhanced Enhanced SuperFin nodes. That'll be fun.
    Probably the first table where I've seen a 10+ as original followed by 10 without the + as the NEXT gen !
    Reply
  • RSAUser - Saturday, September 26, 2020 - link

    Super Enhanced Enhanced SuperFin++* Reply
  • drexnx - Friday, September 25, 2020 - link

    should have just called it 10.0, 10.1, 10.2, etc. or 10r1, 10r2, 10r3, etc.

    the problem with the plusses wasn't the numerical incrementing, it was that past 3 of them it gets hard to parse the exact number quickly since they're repeating shapes, in addition to the "++ = +1" thing around any computer topic.
    Reply
  • Flunk - Friday, September 25, 2020 - link

    Should just call it what it is, 14nm. the +s mean nothing. Reply

Log in

Don't have an account? Sign up now