Biostar Z690 Valkyrie (DDR5)

Despite not having a large stack at the moment, Biostar has launched three Z690 models for Intel's Alder Lake desktop platform. The most premium of these and subsequently the only one of the three that has support for DDR5 memory is the Z690 Valkyrie. The Biostar Z690 Valkyrie has a sort of 'anime' look to it, with a primarily black theme and colorful elements with RGB enabled backlighting in the rear panel cover and chipset heatsink. The Z690 Valkyrie combines a decent controller set, along with all the typical Z690 and 12th gen features such as PCIe 5.0, and of course support for the latest DDR5 memory.

The Biostar Z690 Valkyrie has plenty of PCIe slot expansion slot real estate, including two full-length PCIe 5.0 slots that can operate at x16 and x8/x8, with a third full-length PCIe 4.0 x4 slot. Storage options include a total of four PCIe M.2 slots, including three PCIe 4.0 x4 M.2 slots, one PCIe 3.0 x4 M.2 slot, and eight SATA ports. Biostar also includes four memory slots which can be found in the top right-hand corner, with support for DDR5-6000 and a maximum capacity of up to 128 GB.

On the rear panel is a high-speed USB 3.2 G2x2 Type-C port and a total of seven USB 3.2 G2 Type-A, with plenty of options for integrated graphics. For those users, Biostar includes two DisplayPort 1.4 and two HDMI 2.0 video outputs which shows lots of potential integrated GPU support. On the networking front, there's one Realtek RTL8125B 2.5 GbE port, and although it has the connectors for a Wi-Fi 6E CNVi, Biostar isn't clear on whether the Z690 Valkyrie actually includes the CNVi; the rear panel says yes, but the specifications say no Wi-Fi 6E card is included. Finishing off the rear panel are five 3.5 mm audio jacks and S/PDIF optical output powered by a Realtek ALC1220 HD audio codec, as well as a PS/2 combo port.

ASUS Prime Z690-P WIFI (DDR5) & Prime Z690-P (DDR5) Colorful iGame Z690 Ultra D5
POST A COMMENT

126 Comments

View All Comments

  • Dahak - Tuesday, November 9, 2021 - link

    Will there be a list of DDR4 only board as well? Reply
  • Ryan Smith - Wednesday, November 10, 2021 - link

    Yes, we're also putting together a guide for DDR4 boards. Reply
  • jh20001 - Wednesday, December 1, 2021 - link

    Any news on the DDR4 story? Would be nice to know what model is the best for performance/features in the eyes of others. Reply
  • Flunk - Tuesday, November 9, 2021 - link

    Intel's actually released a compelling new chipset? I'm surprised to see DDR5 and PCIe 5 support, but USB 4 seems to be notably absent, despite there being no reason at all to omit it. Intel is finally one-upping AMD after a few years of playing #2. Reply
  • Exotica - Tuesday, November 9, 2021 - link

    Thunderbolt4 is usb4 capable… Reply
  • CharonPDX - Tuesday, November 9, 2021 - link

    Yep, the only thing USB4 adds over "USB 3.2 2x2" is Thunderbolt support. Therefore any Thunderbolt 4 device is automatically USB4. In fact, essentially any board with "Thunderbolt 3" along with USB 3.2 2x2 basically get "USB4" status for free. Reply
  • DigitalFreak - Tuesday, November 9, 2021 - link

    USB 3.2 2x2 is 20 Gbps. USB 4 is 40 Gbps. Reply
  • 12345 - Wednesday, November 10, 2021 - link

    That's why they mentioned TB3. 40Gbps support is also optional for USB4. Reply
  • 12345 - Wednesday, November 10, 2021 - link

    DP 2.0 is mandatory for USB4 so TB3 support isn't good enough. Reply
  • KarlKastor - Wednesday, November 10, 2021 - link

    That is only the name. The question is, with what speed you can run USB devices. Reply

Log in

Don't have an account? Sign up now