The Intel Z690 Motherboard Overview (DDR5): Over 50+ New Models
by Gavin Bonshor on November 9, 2021 9:00 AM ESTGIGABYTE Z690 Gaming X (DDR5)
Out of all of GIGABYTE's gaming-centric Z690 options, the GIGABYTE Z690 Gaming X is perhaps the most basic from the brand in terms of features, but it looks very stylish for an 'entry-level' gaming model. From top to bottom, the GIGABYTE Z690 Gaming X is decked out in gunmetal grey, with a large power delivery heatsink, and plenty of M.2 heatsinks that amalgamate into the chipset heatsink; a very consistent design throughout. There's also a small element of integrated RGB LED lighting which can be found at the right-hand side of the board and provides a sort of an underglow effect.
Looking at connectivity, GIGABYTE includes one full-length PCIe 5.0 x16 slot, with two full-length PCIe 3.0 x4 slots. Located in and around the PCIe slot area is the board's M.2 storage, with GIGABYTE including four PCIe 4.0 x4 M.2 slots. There are also six SATA ports on the right-hand side with support for Intel RAID 0, 1, 5, and 10 arrays. Located in the top-right corner are the board's memory slots, with GIGABYTE opting for four in total with support for DDR5-6000 and support for up to 128 GB of capacity.
On the rear panel of the GIGABYTE Z690 Gaming X, there's one USB 3.2 G2x2 Type-C, two USB 3.2 G2 Type-A, three USB 3.2 G1 Type-A, and four USB 2.0 ports. The board omits Wi-Fi but does include an Intel I225-V 2.5 GbE controller which is the minimum specification on LAN we've seen on Z690 so far. Onboard audio options consist of two 3.5 mm audio jacks and S/PDIF optical output, with one HDMI and one DisplayPort video output pairing allowing users to leverage integrated graphics.
Facebook
Twitter
RSS
126 Comments
View All Comments
GeoffreyA - Saturday, November 13, 2021 - link
Certainly, there are tradeoffs, keeping a socket; but, as Mr. Tuvok would say, "Ryzen, you are an unending source of astonishment." There was a time when sockets even took CPUs from different manufacturers. I remember my Socket 7 motherboard, though I never tried it, could take a K5 and some Cyrix CPUs as well. Those 5x something, something. How things have changed.A short-lived socket can be a pain in the behind too. I was one of those unlucky folk who ended up with Socket 754 and missed out on dual-channel DDR and a long upgrade path. In any case, that computer went kaput after four years.
Oxford Guy - Wednesday, November 10, 2021 - link
Overclocking is for employees of motherboard companies.ECC RAM support should have been a standard feature from the beginning. Apple offered it on the Lisa in ‘83 and consumer computing has gone backward since.
Doublers, though... aren’t a bad thing as long as they’re implemented well — as I understand it. Better to have a good doubler implementation than a weak individual phase system. The main thing is to have a board meet the minimum spec for reliable (i.e. not overheating and/or failing) long-term support of its supported CPUs. Anything beyond that is unnecessary.
GeoffreyA - Saturday, November 13, 2021 - link
The problem with doublers is, they over-use it as a marketing technique to give the impression that a certain board has a large amount of phases.Oxford Guy - Saturday, November 13, 2021 - link
Weak phases with a mediocre/poor regulator aren’t necessarily better than ‘marketing phases’ via the use of doublers. That’s the case when the doublers are used a correctly.There are a lot of shenanigans, though — like not even utilizing the doubler fully but counting it as the doubling of phases. I also recall that one of the big tricks was putting extra chokes on the board to make it look like there are more phases.
GeoffreyA - Sunday, November 14, 2021 - link
Quite right, and one of the reasons why people have got to read a proper analysis of the VRM, or take a look at the lists on hardwareluxx for example.t.s - Tuesday, November 9, 2021 - link
Wish Intel go with their atv12vo. Or like business lines from HP, Dell, Lenovo, etc. 6 or 8 pin.shabby - Tuesday, November 9, 2021 - link
Mobo prices will go up even more, screw that.meacupla - Tuesday, November 9, 2021 - link
In the long term, I think the cost for ATX12VO will be cheaper.ATX12VO PSU will be cheaper than a comparable quality ATX PSU.
The BoM for 12V to 5V and 12V to 3.3V converters would go down, if mobo makers decide to stick to a single, standardized design.
With the way things are looking, electricity prices are unlikely to go down and continue to go up.
DigitalFreak - Tuesday, November 9, 2021 - link
All ATX12VO is doing is shifting the cost from the PSU to the motherboard.Wrs - Wednesday, November 10, 2021 - link
If mobo makers can stick to one design why can't PSU makers? They already conform to ATX.ATX 12 VO increases costs for piecemeal upgraders because of the simple observation that PSUs outlive motherboards. The question would be whether the power savings are worth it. For prebuilts they're comparing power savings to 0 net component cost so 12VO is already the norm.