The Intel Z490 Overview: 44+ Motherboards Examined
by Gavin Bonshor on April 30, 2020 10:00 AM ESTWorking directly with extreme overclocker Vince ‘K|NGP|N’ Lucido, EVGA has some of the most sought after graphics cards and motherboards in the industry by enthusiasts and gamers alike. Usually turning up later than other vendors to the launch party, EVGA plans to launch two new models designed for Z490. Typically aimed at enthusiasts and gamers with its models and assisted by its EVGA ELEET x1 overclocking utility, EVGA has found success in the components market with its Intel and NVIDIA based products.
EVGA Z490 Dark
Starting with EVGA’s premium Z490 model, the Z490 Dark, it has a lot of bells and whistles with some interesting design choices. The most notable of those is it has just two memory slots on its E-ATX sized 10-layer PCB. It follows a simplistic black and gunmetal grey theme, with a large rear panel cover which doubles up as part of the power delivery heatsink, which forms an L-shape around the LGA1200 socket. Included are two PCIe 3.0 x4 M.2 slots, a single U.2 port, with support for up to DDR4-4600 and up to 64 GB of capacity.
One of the most prominent aspects of the EVGA Z490 Dark is its unconventional desktop design. Typically the memory slots would sit along the right-hand side, but EVGA has placed them along with a transposed LGA1200 socket. This is designed and optimized for extreme overclockers. At the right-hand side are a pair of 8-pin 12 V ATX CPU and a 24-pin 12 V ATX motherboard power inputs with right-angled designs for easier installation. EVGA is advertising an 18-phase power delivery on the Z490 Dark, which looks to be impressive.
For storage is a pair of PCIe 3.0 x4 M.2 slots, with a single U.2 port and eight SATA ports with support for RAID 0, 1, 5, and 10 arrays. There are three full-length PCIe 3.0 slots which operate at x16, x8/x8, and x8/x8/+4, with a half-length PCIe 3.0 x4 slot. In the very top right-hand corner is two 2-digit LED panels which monitor CPU voltage and temperature, with a power and reset button also added.
On the rear panel are two USB 3.2 G1 Type-C, five USB 3.2 G2 Type-A, and two USB 2.0 ports. Offering support for integrated graphics is a single mini DisplayPort video output. In contrast, the boards five 3.5 mm audio jack and S/PDIF optical output is controlled by a Realtek ALC1220 HD audio codec, with an EVGA NU Audio SV3H615 headphone amplifier. Also featured on the rear panel is an Intel I225-V 2.5 G Ethernet controller which powers one port, while the other is provided from an Intel I219-V Gigabit controller. Also offering wireless support is an unspecified wireless interface, while the rear panel has a small red clear CMOS switch. Last but not least, there are a PS/2 keyboard and mouse combo port.
The EVGA Z490 Dark represents a small overclocking based market but has enough features onboard to cater to enthusiastic audiences too. With an Intel 2.5 G and Gigabit Ethernet combo, two PCIe 3.0 x4 M.2 slots and with single, yet rare U.2 port, it has plenty to divulge on. The two memory slots are designed to improve memory latencies when overclocking, something breaking overclocking records depend on these days. Living up to its Dark moniker, the EVGA Z490 Dark will be available at launch, but at present, there is no information on pricing.
Facebook
Twitter
RSS
52 Comments
View All Comments
Tomatotech - Friday, May 1, 2020 - link
Get better hubs then. At least mains powered hubs.I understand not everyone has wifi/ ethernet printers, bluetooth / radio mouse / keyboard / headset, or usb hubs in their monitors, but there does seem to be slightly less need for lots of USB ports compared to a few years ago.
Beaver M. - Saturday, May 2, 2020 - link
Not an option due to several reliability issues and issues recognizing claimed "better hubs" in the first place. Even well known big companies produce crappy USB hubs.As a normal user I have
a printer
a mouse
a keyboard
a gamepad with USB dongle
a USB headset
an external HDD
several external USB ports for USB sticks, temporary Bluetooth dongles, charging devices, etc., which can be up to 4 at a time
Specialized
things:
a joystick
a USB microphone interface
Not really unusual.
Add webcams, card readers, Wifi adapters and many other not really unusual stuff and you still wont have anything rare.
Lots of USB ports are important. Period. And it doesnt even matter if its an ATX board or a NUC. They are always very important.
duploxxx - Friday, May 8, 2020 - link
wow so many USB that you need in the back, how long have you been searching on the internet to find all of these? You can buy cases that also serve USB, or backend brackets….a printer : wireless
a mouse - keyb sure
a gamepad, connected from the back? often to short cable
a USB headset ---- audio connection which you can link with USB mic….
a USB External HDD.... zzz one that you can put away for backup or just horrible initial design from storage perspective
several external USB.... all front unless you Always use your usb dongles and put them in the back "loooooool"
joystick.... yeah use gmaepad and joystick at the same time. same as the gamepad regarding cable length
webcam... easy connection in monitor hub
card readers... again in the back used all day right....
USB wifi adapters? really are you joking?
in other words lots of pathetic feedback... learn to design a desktop computer
Beaver M. - Saturday, May 2, 2020 - link
Low USB port count has been a problem far longer than 5 years.Only Asus seem to have gotten the hint at some point, but Asus is crappy quality and CS.
Seeing Gigabyte adding enough now is a good sign, because they usually were the ones having the least amount of them.
I agree on the hubs. Not only do they die, some of them even nuke your mainboards USB ports through feedback loops. Not to mention they always either have connection problems or issues with sleep or hibernation.
Chaitanya - Friday, May 1, 2020 - link
Whats wierd is most of the boards from Asus and Asrock have multiple 40mm fans to cool VRMs while they seem to stick solid slabs of Aluminium and calling it a day unlike Gigabyte and Msi(on top end atleast) who have proper finned heatsinks.Deicidium369 - Friday, May 1, 2020 - link
The only reason people think Asus are a high end manufacturer is their price and the truckloads of equipment they give to anyone with more than 10 subs on Youtube. Gigabyte or go home.Beaver M. - Saturday, May 2, 2020 - link
Agreed. Same with ASRock and their crappy customer support and massive USB issues.Gigabyte always tried to add important features. Remember when they added their "extra ounces" of copper? All other manufacturers whined that it doesnt do anything and Gigabyte should stop because its a "waste of resources". LOL!
Now they all do it because it makes the mainboard much more reliable.
Sure, they dont have the best OC boards, but in the last few years OC has become very niche, because you cant really OC CPUs well anymore, unless you want to use LN or custom liquid coolers.
Andrew LB - Sunday, May 10, 2020 - link
I've been building/repairing/upgrading computers for people for close to 30 years and I've had more problems with Gigabyte than any other current major brand. Abit was even worse but they're long gone. I'm willing to bet that those of you who say a company has bad customer service was due to you contacting them via e-mail. Pickup the phone next time and i bet it will go much easier.Best CS from my experience is EVGA.
taz-nz - Saturday, May 2, 2020 - link
To many board still don't have attached back plates, should be standard now.Nice to see gigabyte bring proper finned heatsink to Mid range board, pity so many other boards still have cosmetic lumps of aluminum, instead of proper VRM heatsinks, and worse that so many still choose to cover the those so called heatsinks with cosmetic plastic covers that only reduce airflow and hurt thermal performance more, while also interfering with large air cooler fitment.
Oxford Guy - Saturday, May 2, 2020 - link
"What's interesting is how similar the Z490 and Z390 chipsets are in terms of specifications, which adds the question of why Intel has opted for a new socket, on what is effectively a refresh of its 14 nm process node."Baffling is a better word than interesting.
If AMD weren't so competitive then it would make more sense to paint oneself into a corner even more.