ASRock X470 Taichi Ultimate Conclusion

The ASRock X470 Taichi Ultimate’s focus is primarily on performance users with plenty of premium and high-end features to satisfy gamers too. This ATX sized flagship model from ASRock does have a lot of bells and whistles, but not the kind you would expect with the usual red and black themed gaming targeted model. Instead this is one that has one eye on trying to look as if it has style, whilst still appealing to what I like to call 'the RGB generation'.

The performance was generally average and consistent with previous testing, with the biggest positive showing come through system POST times and within our Handbrake video conversion benchmark. Everything else appeared to be consistent, with the exception of some rather questionable results garnered in our Ashes of the Singularity and Total War game testing; the same kind of results we found in our GIGABYTE X470 Gaming 7 Wi-Fi review. It’s not quite as bad as the figures yielded in gaming may suggest, and could perhaps be attributed to firmware infancy. DPC latency testing did prove rather positive and the audio performance displayed in our RMAA testing achieved the expected results. ASRock’s decision to omit any form of EMI shielding and any noticeable audio PCB separation may not give the impression audio is one of their key areas, but these features can sometimes be overemphasized by manufacturers as being a vastly superior when good quality component choice and circuitry play a more important role on overall performance.

The power delivery of the motherboard is overkill for most users. This likely contributed to our overclocking performance, with our Ryzen 7 1700 sample hitting 4.0 GHz, going beyond the 3.9 GHz mark we've been able to achieve on most boards. The X470 Taichi Ultimate displays a good showing on the overclocking front and it would be easy to see why an extreme overclocker may opt to go for this board over other offerings. The board also has an external clock generator for allowing adjustments to the baseclock frequency. An additional 4-pin 12 V CPU power input in addition to the standard 8-pin is also desirable as it allows the CPU to pull additional power at maximum load and frequencies when required.


The ASRock X470 Taichi Ultimate paired with the Cooler Master Master Liquid ML240R AIO RGB Cooler

For $300, the inclusion of an Aquantia AQC107 10Gb/s LAN port in addition to a secondary Gigabit LAN port powered by the Intel I211-AT controller adds an element of premium quality to what could be mistaken for its little brother, the X470 Taichi; aside from slight aesthetic adjustments to the heatsinks and covers. Another premium feature included are the Realtek ALC 1220 audio codec which can be configured through the included useful, yet primitive and basic looking Realtek HD Audio Manager.

While the ASRock X470 Taichi Ultimate has everything a top board should, it’s essentially the regular X470 Taichi with 10G Ethernet and on-board power and reset switches, which on the regular X470 Taichi, the circuitry can actually still be seen so it does feel like these two boards share the same PCB, but with minor differences and inclusions. Does the extra $70 signify the cost between the two boards? If the user is wanting to utilize the 10G LAN port then the price can be justified, but if that's not the case, the $70 saved on the regular X470 Taichi could allow for more budget to be allocated elsewhere, such as system memory which does scale pretty well with the Zen architecture, or a higher capacity SSD. 

The ASRock X470 Taichi Ultimate has a beautifully unique look with oodles of Polychrome RGB capabilities for a glorified light show and has decent performance to back it up. However if the Aquantia 10G LAN isn't a feature that's going to be taken advantage of, the $70 cheaper, going for the ASRock X470 Taichi could well and truly be the difference between opting for the better Ryzen 7 2700 ($299) over the Ryzen 5 2600X ($229) .

Other AnandTech Ryzen Coverage

Ryzen Overclocking
Comments Locked

41 Comments

View All Comments

  • LJM - Thursday, August 2, 2018 - link

    Indeed I was. Thanks.
  • Goty - Thursday, August 2, 2018 - link

    So... no networking tests?
  • PeachNCream - Thursday, August 2, 2018 - link

    There's probably no equipment available to perform those tests. 10G switches and NICs aren't commonplace or affordable right now. Then again, Anandtech has done little in the way of network adapter testing and this article puts the network features of the board in question up as a headline feature, but does not quantify that feature in a comparative benchmark. That's a bit of a miss in my opinion and should be something rectified in the future.
  • hansmuff - Thursday, August 2, 2018 - link

    I would think a single 10G NIC would be enough, Startech sells one for $230. Pop that into any motherboard and at least do some simple iperf, "LAN Speed Test" or NetStress. Settle on one and use that going forward.
  • DigitalFreak - Thursday, August 2, 2018 - link

    No need to even spend that much. You can buy an Aquantia AQC107 NIC for $85.
  • hansmuff - Thursday, August 2, 2018 - link

    Huh, nice to know.. are there any 10 Gbps switches in a somewhat affordable range yet ($150-$200 4 port)?
  • CheapSushi - Friday, August 3, 2018 - link

    It's not 4 port but the cheap options are ASUS XG-U2008 & Netgear GS110MX. Also keep it mind you can direct connect two setups together say for a NAS to main rig without a switch. And the benefit of these newer switches and chips is that they're not finicky about what speed they're on; it's dynamic, so 10G, 5G, 2.5G, 1G and 100MB, etc.
  • AdrianB1 - Thursday, August 2, 2018 - link

    Good question, especially as mentioned the board is the Taichi plus the NIC, so the review is actually for the Taichi, not for Taichi Ultimate.
    LAN testing can be performed with another board with an Aquantia board with no switch, just a direct cable connection. And this board has also 2.5 and 5 Gbps capabilities, it would be interesting to see how well the real throughput scales: it depends a lot on how the chip is connected - how many lanes of which PCIe version. One needs 4x PCIe ver 2 or 2x PCIe ver 3 for full 10 Gbps, but there are not so many available PCIe lanes and the chip may be connected to half or a quarter of what it needs. That way you still get close to 5 Gbps one-way or even 8-9 Gbps one way, assuming the Aquantia chip can do that, but not full duplex 10 Gbps.
  • DigitalFreak - Thursday, August 2, 2018 - link

    Unfortunately Asrock doesn't include a PCI-E diagram in their manual, so there's no way to know. It could be either PCI-E 2.0 x1, x2 or x4.
  • Cygni - Thursday, August 2, 2018 - link

    Its the same chipset and implementation that Aquantia has been selling on motherboards and add on cards for a while. That would be like testing the i211AT on the other port, its a pretty known quantity at this point.

Log in

Don't have an account? Sign up now