A Budget Home Theater & PC Setup: 4K, HDR, UHD Blu-ray, and More
by Ganesh T S on December 26, 2017 8:30 AM ESTConfiguring a UHD Blu-ray Playback System
The rise in popularity of OTT streaming has coincided with a decline in the popularity of physical media formats such as Blu-rays. Irrespective of the market statistics, it is indisputable that the bitrates possible with the latter simply can't translated to OTT services. Bitrates usually directly correlate with video quality, though, beyond a certain point, it becomes very difficult to distinguish. HD audio formats such as Dolby Atmos, DTS-HD MA, Dolby TrueHD etc. are also yet to be widely adopted by OTT streaming services. On top of all these, Blu-rays are often treated as collectibles by some consumers.
UltraHD (UHD) Blu-rays (with their 4K resolution videos encoded in HEVC) were a bit slow to take off. On the PC front, the number of licensed software Blu-ray player vendors has come down from 3 (ArcSoft, Corel, and CyberLink) to just CyberLink alone. PowerDVD 17, with UHD Blu-ray support, was released in April 2017. The hardware requirements were quite specific, and we decided to pass up on a hands-on review at that time.
While reviewing the Intel NUC7i7BNH, I realized that it came with support for SGX, one of the primary requirements for PowerDVD 17 to play back UHD Blu-rays. I also remembered that the BIOS of the ASRock Beebox-S 7200U had a SGX option. Both of these systems also had a LSPCon on board to support HDMI 2.0 with HDCP 2.2 capability. Pioneer launched the BDR-211UBK in March, but, had specifically indicated that KBL-U was incompatible. However, based on our discussions with both CyberLink and Intel, we decided to give the drive a try by connecting the internal SATA ODD using a compact SATA-USB bridge.
The Pioneer BDR-211UBK and the UGREEN SATA-USB Adapter Combine to Make the Intel NUC7i7BNH a UHD Blu-ray Player
We looked up Amazon for a compact bridge and chanced upon a versatile UGREEN adapter. In addition to supporting the SATA drive, it also had a couple of USB 3.0 Type-A extension ports and a microSD reader. This made sure that the optical drive would not completely take over the USB port in the host system.
Using an Internal Drive without an Enclosure is not an Issue if the Setup is Tucked Out-of-Sight
After setting up the hardware and configuring the BIOS appropriately in the two systems, we installed the Management Engine components. The next step was to confirm that the system and allied components were correctly set up for UHD Blu-ray playback with HDR. CyerbLink provides the Ultra HD Blu-ray Advisor tool for this purpose. It also helpfully points out missing ME components or mis-configured BIOS options. Even though we were aware that the Zotac ZBOX MAGNUS EN1080K doesn't pass the requirements check (no SGX, iGPU inactive), we did try out the tool on it also.
The CyberLink Ultra HD Blu-ray Advisor (L: ASRock Beebox-S 7200U, R: Zotac ZBOX MAGNUS EN1080K)
Even though it is possible that the Zotac EN1080K might enable SGX in a future BIOS release, the use of the Intel GPU is probably disabled at the board level. This means that there is no protected audio/video path for secure decoding of the UHD Blu-ray streams. Given that there is no talk of UHD Blu-ray support from NVIDIA Pascal, consumers shouldn't keep their hopes up regarding the possibility of UHD Blu-rays getting played back on NVIDIA Pascal-equipped systems. Coming back to the results of the UHD BD Advisor tool, we find that the two KBL-U systems pass all the checks. We purchased a retail copy of the Planet Earth II UHD Blu-ray for testing out our setup.
Facebook
Twitter
RSS
191 Comments
View All Comments
ganeshts - Tuesday, December 26, 2017 - link
I would love to get a rundown of the budget for that PR server backend. Still too limited IMO and not enough flexibility.Aspernari - Tuesday, December 26, 2017 - link
"On a budget", then recommends and links a receiver over twice the cost of the TV!Come on. Seriously.
Aspernari - Tuesday, December 26, 2017 - link
Replying to myself to further comment: His actual recommendation, the Denon AVRS730H is merely JUST AS EXPENSIVE as the TV.And then there's no actual speakers, or mention of speakers on the entire AVR page... So why are we getting a receiver?
At the price of the receiver alone, you can start getting into entry level Atmos-enabled soundbars.
ganeshts - Tuesday, December 26, 2017 - link
How is $349 / $429 as expensive as a $700 TV? Maybe you are seeing some other numbers?ddrіver - Tuesday, December 26, 2017 - link
Ganesh, are you actively trying to not understand the point multiple people are making? DO NOT PUT "BUDGET"-ANYTHING IN THE TITLE. Especially if you're going to use a $2000 HTPC with a GTX1080, or a $1000 receiver (https://www.amazon.com/dp/B072Z9ZGSZ ). Did I already say it? This is not budget!Do you get your Christmas bonus for clicks? I clicked because I'm looking for a receiver recommendation on a budget and expected some good but cheap options. And I find you're actually using a $1000 model and just mentioning another almost $500 model (https://www.amazon.com/Denon-AVRS730H-Receiver-wir... ) once without detailing much on alternatives or what similar models I could go for. You went on to talk about the $1000 model for the rest of the receiver section.
Aspernari - Tuesday, December 26, 2017 - link
Whoops, I was thinking about the S405. Sorry, the receiver is only nearly as expensive as the TV when the TV is on a good sale. Now, let's get back to the absurdity of this article.This article lacks direction and focus. It misses the mark for both its stated purpose, and as any sort of reasonable guide or reference.
- Assume the reader is recycling speakers, but not any other components - Going all the way down to HDMI cables.
- Clearly a sponsored deal with Denon. It's disclosed but still awful since no other receiver is mentioned, alternatives like soundbars (again, low end Atmos is available for less than the recommended receiver) are never mentioned, and anyone looking for help unpacking the current audio tech is left on their own.
- $2000 HTPC, even as a joke option, is more than the entire rest of the recommended kit combined.
- Recommending all sorts of hardware that doesn't support features that should have been seen as requirements (Tegra and the $2000 HTPC failing to provide full HDR support, etc).
- Recommending a $200 Android device in an article about budget setups featuring a Roku TV.
- $200 more in Bluray playback equipment to the HTPCs, but no consideration for UHD bluray players or the Xbox One S - The recommendation is to deal with the minefield of compatibility issues rather than spend the same sum on a standalone solution that doesn't suffer from those problems - and plays games!
- I'm going to harp on the Denon sponsorship and the clear bias there again. There are two products named in the article subsections. The TV, and the receiver. And it's not even the recommended receiver! No other single product gets an entire page to itself. The section about the receiver is even longer than the TV. There's no info provided about the S730H, not even basic specs. Congrats on your free $1000 receiver, but it doesn't belong in a budget article.
I get that you wrote this as a "this is what I did" article, not a comprehensive guide, but come on. No alternatives suggested for the Denon is... Really galling.
we - Tuesday, December 26, 2017 - link
Apparently Ultra HD Blue-ray video and sound quality from the Xbox One S is somewhat disappointing.https://www.whathifi.com/news/no-xbox-one-s-isnt-v...
Aspernari - Tuesday, December 26, 2017 - link
There've been some patches since that article was published which, as I understand it, addressed most of the quality issues.I have an X, and have no complaints - but I also don't have another UHD disk player to compare against.
Aikouka - Wednesday, December 27, 2017 - link
I've mentioned this before, but the Xbox One's greatest flaw is that it's too noisy. Disc noise pushed me away from using the player after playing only a single movie (Sicario). I also ran into problems with the disc freezing in random spots, but not always in the same spot. (Do note that other players had no problems with the disc at all.) If you want a basic UHD player, I'd probably go with the Sony X800. I've had the best luck with mine so far with only a few hiccups in the beginning. I did replace it simply because I wanted a unit with Dolby Vision, which the only decent (but not cheap) option there was the Oppo 203.Galid - Wednesday, December 27, 2017 - link
There must be a lot of kids in here, this is not SUPER budget but it sure is budget in my mind. My home theater setup without the PC is worth 6k$ and it is considered cheap by many standards. The best budget and worthy contender for around 600$ would be the Onkyo NR727. I myself would not consider anything below but that's only 200$ cheaper. ONE of my speakers costs freaking 400$ and I'm really considered on the OK/cheap side. Do you guys ever go out in stores, you know, not those internet websites where you click and wait, ACTUAL audio video stores? WAW you guys need to see the light outside, it's made by the SUN! WAW!!! Any respectable audio video store will have AVR + speakers setups from 1k to 50k$++, so I would consider 1 to 5k pretty cheap.Wanna go ultra budget, buy used and freaking leave this website alone. What do you want, website full of used audio video pieces of equipment just leave this place. Sure this article could be better but it sure look budget friendly to me and I'm FAR from being a rich guy.
When I see people complaining about a 800$ receiver, I cannot help but wonder who's reading these articles. You work for mcdonalds 24h a week? Don't look at buying a home theater, get a BETTER JOB then come back ffs.