GIGABYTE Z370 Gaming WiFi (Wi-Fi)

Our next board in the GIGABYTE Z370 lineup is the Gaming WIFI. This board appears to find itself in the somewhere around the Gaming 3 and Gaming K3 in the product stack. The board uses the Creative Sound Core3D audio over the more traditional ALC1220 in a nod towards 'gaming'. As the name implies, the Gaming WIFI includes Intel WiFi in addition to the Intel NIC. 

On the appearance side of things, the Gaming WIFI looks strikingly similar to the Gaming 3. The difference here is the removal of the red parts to black parts, such as the all-black DRAM slots and all-black PCIe slots. The only red remaining comes from the back panel IO shroud, and the WIMA caps in the audio section. Otherwise, its the same board, appearance wise, from the PCH heatsink to the AORUS Falcon prominently stenciled on the board. We get RGB LEDs on the heatsink and audio separation line, but also LEDs around the VRM area on the Gaming WIFI. 

Memory support on this board is the same as the K3 and Gaming 3, supporting a capacity up to 64GB and speeds to DDR4-4000. The PCIe slot arrangement changes a bit and consists of two reinforced, CPU fed, full-length slots running at x16 and x8/x8, supporting AMD Crossfire and NVIDIA SLI, and another full-length slot running at x4 driven by the chipset PCIe lanes. Users will also see three PCIe 1x slots also fed from the chipset.

The board has six SATA ports, to the right of the PCH heatsink and parallel to the board. The M.2 slots are above the top PCIe 1x slot and the second is above the bottom, non-fortified full-length PCIe slot. They support drives in 110mm and 80mm length respectively. The Gaming WIFI has a total of five hybrid fan headers located around the board and can be controlled by the Smart Fan 5 application. Two RGBW headers and two digital LED headers are there to use if the included RGBs are not satisfactory. The onboard audio moves away from the Realtek ALC1220 codec and uses the Creative SOund Core3D audio, and has EMI shielding and uses Nichicon and WIMA audio caps. For networking, the Killer E2500 NIC found on the Gaming 3 is replaced by an Intel GbE LAN. This motherboard supports Thunderbolt 3 via an add-in card, and the connector for the card is located between the last full-length PCIe slot and the bottom 1x slot. 

USB 3.1 (10 Gbps) duties are handled by an ASMedia 3142 controller giving Type-C and Type-A ports on the back panel IO. From the chipset, there are a total of 10 USB 3.1 (5 Gbps) ports with six on the back panel and another four available through the internal USB headers. Also sourced from the chipset are two USB 2.0/1.1 ports through internal USB headers. Additionally, the Gaming WIFI gains two more USB 2.0/1.1 ports through a Genesys Logic USB 2.0 hub and can be accessed through internal USB headers as well. The rest of the back panel IO consists of a combination PS/2 port, the Intel 3165 WiFi adapter, an HDMI output, and a gold plated audio stack including a SPDIF port. 

The Gaming WIFI has an interesting set of features with the inclusion of Wi-Fi, and using the Creative Sound Core3D audio instead of the Realtek solution. This also gives users an option of using SPDIF which the Gaming 3 and K3 lack. Also supported is SLI.

GIGABYTE Z370 Gaming K3 GIGABYTE Z370 Ultra Gaming
Comments Locked

83 Comments

View All Comments

  • weevilone - Wednesday, October 25, 2017 - link

    Notable that though the new boards are often very similar to their Z270 predecessors, Asus has dropped Thunderbolt 3 support from the Maximus X Hero board.
  • masouth - Thursday, October 26, 2017 - link

    ASUS ROG Z370 Maximus X Hero

    "....new metallic heat sinks that are an upgrade over the plastic heatsinks found on the Z270 version"

    Please excuse my ignorance because I didn't own a ROG Z270 mb but...plastic HEAT SINKS? Not shrouds or decoration over a heat sink but the actual heat sinks themselves? That's either wrong, they performed their job pretty poorly, or plastic resins have advanced a lot farther in thermal conductivity (and cost for such) than I realized.
  • flowrush - Sunday, November 19, 2017 - link

    "The other main distinguishable feature is the inclusion of integrated 802.11ac Wi-Fi with an antenna (that can only be described as a shark fin) found on the F."

    The above is incorrect in the article. The integrated Wi-Fi module with antenna is found on the E not the F.
  • Coldgame - Saturday, November 25, 2017 - link

    I'm looking to build a rig with the Z370 Gaming ITX/ac, a GTX-1070 card and an Apple Thunderbolt Display.
    The review states:
    "The key difference in the support between the two boards is going to be the Thunderbolt 3 port on the Gaming-ITX. This port supports video outputs..."
    So, can anyone confirm or deny that video generated by the GTX-1070 can be output through the onboard Thunderbolt 3 port?
  • hanselltc - Sunday, December 3, 2017 - link

    Looking forward to low-middle end mITX choices from this platform. It'll probably be paired with a 8100/8300 and be my secondary machine.
  • Roen - Sunday, February 4, 2018 - link

    Where are the 10 Gbps ports on the back? They all look like 5 Gbps ports, even the Type C.
  • rbarak - Wednesday, February 21, 2018 - link

    Is anyone using the Z370-P on Linux with two screens?

    I built a new machine based on the Z370-P, and both the DVI and the HDMI connected screens show the same image, and the RHEL7 setup/displays show only one Unknown Display.

    I follwed the advice on stackexchange, and added this line:

    $ grep GRUB_CMDLINE_LINE_DEFAULT /etc/default/grub
    GRUB_CMDLINE_LINE_DEFAULT="i915.alpha_support=1"

    Then I did:
    sudo grub2-mkconfig -o "$(readlink /etc/grub2.conf)"

    And rebooted, but still, the two displays are not shown.
  • dromoxen - Wednesday, May 9, 2018 - link

    Shocked to see that both the Asrock mitx boards are "szie=ATX" .. LOL
    The addition of Tunderbolt sure seems to add a hefty premium £120 vs £160 , luckily I can do without.
  • Kroebo - Sunday, October 7, 2018 - link

    Sadly, I discovered that the ZUG Gaming PLUS doesn't support SLI.
  • trag - Tuesday, January 15, 2019 - link

    On the ASrock Z370M Pro4 the M.2 slot information is backwards. Both slots support NVME. One slot also supports SATA. As written, "The first M.2 slot is SATA only while the second supports PCIe." it seems to say that one slot is SATA only and the other slot is PCIe (NVME) only.

Log in

Don't have an account? Sign up now