ASUS ROG Strix X399-E Gaming

With the advent of eSports and the ability to stream and even broadcast your own gaming sessions, PC gaming has gained a significant amount of momentum the past few years. So much so, many (if not all) of the motherboard partners have latched on to the nomenclature and started entire lines for 'gaming' motherboards. ASUS is no different with gaming based motherboards, out for generations now under the ROG name, and continues to do so on the X399 Threadripper platform in the ROG Strix X399-E Gaming. Strix as a brand has migrated from a 'zero-noise' implementation to the more budget oriented gaming products from ASUS.

The ROG Strix falls between the Zenith Extreme and the Prime with a mix of features. For example, the Strix includes WiFi and Bluetooth connectivity, like the flagship Zenith Extreme, or that the Prime and Strix each have a single Intel I211-AT Gigabit LAN while the Zenith has three network ports including a 10 GbE. The Strix X399-E Gaming has eight DRAM slots, supports multiple GPUs (SLI and Crossfire), uses the latest audio codec (Supreme FX S1220A for the Strix), a capable VRM, multiple storage options, and RGB lighting among other features.

Looking over the board in detail, we'll start at the top. First, the VRM configuration is an eight-phase design. It is cooled by dual heat sinks running along the top of the socket with the second sitting between the memory slots and rear I/O. Extra cooling on the VRMs is provided by an included 40mm fan sitting under the I/O shroud (similar to the Zenith). Both EPS connectors, an 8-pin and 4-pin, as well as the 24-pin ATX connector, are in the top right-hand corner of the board. Below that is the second M.2 slot. An M.2 drive in this slot, like in the Prime, sticks out from the board instead of laying flat. ASUS does include an M.2 bracket for the slot to assist with supporting the standing device.

Continuing to move down the motherboard, below the vertical M.2 slot is the USB3.1 (10 Gbps) header fed from the chipset. For cases that have front panel USB 3.1 ports, this is typically the header used for that connectivity. Below that is the single U.2 port and six SATA ports. 

The chipset heatsink on the ROG Strix houses RGB LEDs that can be adjusted with the AURA Sync software. The only other LEDs on the board are located on the I/O cover. The chipset heatsink extends on the bottom between the last two full-length PCIe slots and covers the first M.2 slot providing additional cooling for those devices. 

The Strix offers four full-length PCIe slots, three use a reinforcing guard and is where users will slot their graphics cards for optimal performance. The PCIe arrangement allows for up to a triple slot video card between slot 1 and slot 3, and a dual slot card will fit between between slot 3 and slot 4. Slot breakdowns are x16 for single, x16/x16 for dual GPUs, and x16/x16/x8 when using three GPUs. Additionally there is one PCIe x1 slot, a PCIe x4 slot, and full-length PCIe slot (x4). These slots distinguish themselves by not having the reinforcement. 

Across the bottom of the board are more onboard headers. These include external addressable RGB LED headers, fan headers, and USB3.0 headers. It also has a debug display as well as a small power button for testing outside of the case. On the left side of the board is where the audio parts are housed. Mostly concealed under the shroud is an EMI protected ALC1220A codec using upgraded filter caps, and PCB separation of the audio components from the rest of the board.

The rear I/O panel is fairly busy with a BIOS reset button, wireless connectivity, eight USB 3.0 ports, and the Gigabit Ethernet port taking up most of the real estate. USB 3.1 Type-A and Type-C ports from the ASMedia controller are also present, with the audio jacks, including SPDIF output, rounding out the rear panel. 

ASUS ROG Strix X399-E Gaming
Warranty Period  3 Years
Product Page Link
Price N/A
Size ATX
CPU Interface TR4
Chipset AMD X399
Memory Slots (DDR4) Eight DDR4
Supporting 128GB
Quad Channel
Up to 4133 MHz (OC)
Network Connectivity 1 x Intel I211-AT GbE
Wireless Network Wi-Fi 802.11 a/b/g/n/ac
Onboard Audio SupremeFX S1220A
PCIe Slots for Graphics (from CPU) 4 x PCIe 3.0 x16
Supports SLI/CF
PCIe Slots for Other (from Chipset) 1 x PCIe 2.0 x4 (max)
1 x PCIe 2.0 x1
Onboard SATA 6x Supporting RAID 0/1/10
Onboard SATA Express None
Onboard M.2 2 x PCIe 3.0 x4 - PCIe or SATA
Onboard U.2 1 x PCIe 3.0 x4
USB 3.1 1 x Header
1 x Rear Panel Type-A
1 x Rear Panel Type-C
USB 3.0 8 x Rear-Panel
2 x Header
USB 2.0 2 x Header
Power Connectors 1 x 24-pin EATX
1 x 8-pin ATX 12V
1 x 4-pin ATX 12V
Fan Headers 1 x M.2
1 x CPU
1 x CPU OPT
3 x Chassis 
1 x AIO_PUMP
1 X w_PUMP+
1 x 5-pin EXT_FAN
IO Panel 1 x Intel NIC
1 x USB 3.1 Type-A
1 x USB 3.1 Type-C

8 x USB 3.0 
1 x Optical S/PDIF out
5 x Audio jacks
1 x USB BIOS Flashback Button
1 x 2x2 Wi-Fi 802.11 a/b/g/n/ac

ASUS mentioned pricing for the Strix X399-E Gaming to be at a more affordable price than their flaghsip ROG Zenith Extreme. It is currently available through smaller distributors, perhaps as a pre-order, but not found on Newegg or Amazon at the time of writing (9/11).

ASUS Prime X399-A GIGABYTE X399 AORUS Gaming 7
Comments Locked

99 Comments

View All Comments

  • BoemlauweBas - Friday, October 20, 2017 - link

    The fact you still can't buy them is one thing, and it will be expensive. Then again, if money ain't a thing & you'll agree one kidney should be enough for anyway. Buy this for your (Yes, it's in the sales sheet) for you games / media. For the real OG's would go for something like Sandisk's Infiniflash.....
    I know right .... https://www.youtube.com/watch?v=iWvrOItRSyQ
  • plonk420 - Tuesday, September 19, 2017 - link

    you go fairly high end motherboard, but then you get terrible SATA cards? ಠ_ಠ

    yeah, do like Supermicro (there's a couple cards low $100s) or at least that Adaptec.

    just like IDE cards back in the day... buy a crap card, get crap performance.
  • mapesdhs - Tuesday, September 19, 2017 - link

    It's a shame Intel's never made a PCIe card using its own controller, because of course Intel's SATA3 ports on its own boards always work nicely. But then, if they did, loads of people would buy the card to fit to older boards (especially X58, Z68, X79, etc.) instead of upgrading to a newer board, and it'd be cool to have such an option for AMD boards aswell. Never gonna happen though I guess.
  • Oksana - Saturday, September 19, 2020 - link

    I really like Thunderbolt, but also want to build a Threadripper computer. Is it possible to have the best of both worlds and add a thunderbolt card?
  • ddriver - Friday, September 15, 2017 - link

    It has six. How much do you need? Considering it also has 3 M2 slots.

    That 10 gbit lan card is for connecting to a proper nas server. You don't cram a workstation with a dozen HDDs.
  • nathanddrews - Friday, September 15, 2017 - link

    I'm not building a workstation.
  • ddriver - Friday, September 15, 2017 - link

    So you are building a file server then? Senseless choice of hardware then ;)
  • HomeworldFound - Friday, September 15, 2017 - link

    A file server is a good wife excuse to build with a Threadripper. He can pretend he needs one core per hard drive and in order to stream video to more than one TV he needs two GPUs. It works.
  • ddriver - Friday, September 15, 2017 - link

    So a dumb wife having to approve your purchases is a realistic scenario? :D
  • HomeworldFound - Friday, September 15, 2017 - link

    In my location telling people that you can build a computer makes people want to touch you.

Log in

Don't have an account? Sign up now