GIGABYTE X470 Aorus Gaming 7 Wi-Fi Board Features

The GIGABYTE X470 Aorus Gaming 7 has all the hallmarks of being the best from their current range of X470 boards on paper, especially in regards to specific areas such as onboard audio and storage support. With everything you would expect from a motherboard from a vendor aiming directly towards gamers, the Realtek ALC1220-VB paired alongside a dedicated ESS SABRE DAC adds an element of quality not found on a lot of AM4 socketed offerings. Priced at $240, it is certainly competitive in a growing X470 market. Not to mention B350/X370 aren’t going anywhere either any time soon so there’s going to be more choice than ever.

The Dual NVMe supported M.2 slots and six SATA 6 Gbps top off a relatively feature packed full sized ATX offering with a plethora of RGB LED lighting for the users who care a lot about aesthetics. For gamers not wishing to be tied down to ethernet cables, GIGABYTE has included one of Intel's latest 9260NGW 802.11ac Wi-Fi Wave 2 modules to offer wireless connectivity to a network.

GIGABYTE X470 Aorus Gaming 7 Wi-Fi ATX Motherboard
Warranty Period 3 Years
Product Page Link
Price $240
Size ATX
CPU Interface AM4
Chipset AMD X470
Memory Slots (DDR4) Four DDR4
Supporting 64GB
Dual Channel
Up to DDR4-3600
Video Outputs N/A
Network Connectivity Intel I-211AT Gigabit
Intel 9260NGW 802.11ac Wi-Fi (Wave 2)
Onboard Audio Realtek ALC1220-VB
PCIe Slots for Graphics (from CPU) 1 x PCIe 3.0 (x16)
1 x PCIe 3.0 (x16) - runs at x8
1 x PCIe 3.0 (x4) - shares with M.2
PCIe Slots for Other (from PCH) 2 x PCIe (x1)
Onboard SATA Six, RAID 0/1/10
Onboard M.2 1 x PCIe 3.0 x4/SATA (top slot) - 22110
1 x PCIe 2.0 x4/SATA (bottom slot) - 2280
USB 3.1 (10 Gbps) 1 x Type-A
1 x Type-C
USB 3.0 (5 Gbps) 6 x Rear Panel (Type-A)
4 via Header
USB 2.0 2 x Type-A
4 via Header
Power Connectors 1 x 24-pin ATX
1 x 8-pin CPU
1 x 4-pin CPU
Fan Headers 1 x CPU (4-pin)
7 x System (4-pin)
IO Panel 1 x USB 3.1 Type-A (USB 3.1 Gen 2)
1 x USB 3.1 Type-C (USB 3.1 Gen 2)
6 x USB 3.1 Type-A (USB 3.1 Gen 1)
2 x USB 2.0 Type-A
1 x Network RJ-45
5 x 3.5 mm Audio Jacks
1 x S/PDIF
1 x Power/Reset Button
1 x Clear CMOS Button
2 x MMCX antenna connectors (2T2R)

The most notable exclusion is a U.2 port although considering this is their current flagship AM4 model; for the price of the board and the high-end segment this board is targeting, it wouldn’t have gone amiss, but the reasons for the exclusion remains understandable. Another omission is a PS/2 combo port which means only USB keyboard and mice can be used with the Gaming 7.

Test Bed

As per our testing policy, we take a high-end CPU suitable for the motherboard that was released during the socket’s initial launch, and equip the system with a suitable amount of memory running at the processor maximum supported frequency. This is also typically run at JEDEC subtimings where possible. It is noted that some users are not keen on this policy, stating that sometimes the maximum supported frequency is quite low, or faster memory is available at a similar price, or that the JEDEC speeds can be prohibitive for performance. While these comments make sense, ultimately very few users apply memory profiles (either XMP or other) as they require interaction with the BIOS, and most users will fall back on JEDEC supported speeds - this includes home users as well as industry who might want to shave off a cent or two from the cost or stay within the margins set by the manufacturer. Where possible, we will extend out testing to include faster memory modules either at the same time as the review or a later date.

Test Setup
Processor AMD Ryzen 7 1700, 65W, $300,
8 Cores, 16 Threads, 3GHz (3.7GHz Turbo)
Motherboard GIGABYTE X470 Aorus Gaming 7 Wi-Fi (BIOS F4c)
Cooling Thermaltake Floe Riing RGB 360
Power Supply Thermaltake Toughpower Grand 1200W Gold PSU
Memory 2x16GB Corsair Vengeance LPX DDR4-2400
Video Card ASUS GTX 980 STRIX (1178/1279 Boost)
Hard Drive Crucial MX300 1TB
Case Open Test Bed
Operating System Windows 10 Pro

Readers of our motherboard review section will have noted the trend in modern motherboards to implement a form of MultiCore Enhancement / Acceleration / Turbo (read our report here) on their motherboards. This does several things, including better benchmark results at stock settings (not entirely needed if overclocking is an end-user goal) at the expense of heat and temperature. It also gives, in essence, an automatic overclock which may be against what the user wants. Our testing methodology is ‘out-of-the-box’, with the latest public BIOS installed and XMP enabled, and thus subject to the whims of this feature. It is ultimately up to the motherboard manufacturer to take this risk – and manufacturers taking risks in the setup is something they do on every product (think C-state settings, USB priority, DPC Latency / monitoring priority, overriding memory sub-timings at JEDEC). Processor speed change is part of that risk, and ultimately if no overclocking is planned, some motherboards will affect how fast that shiny new processor goes and can be an important factor in the system build.

Many thanks to...

Thank you to ASUS for providing us with GTX 980 Strix GPUs. At the time of release, the STRIX brand from ASUS was aimed at silent running, or to use the marketing term: '0dB Silent Gaming'. This enables the card to disable the fans when the GPU is dealing with low loads well within temperature specifications. These cards equip the GTX 980 silicon with ASUS' Direct CU II cooler and 10-phase digital VRMs, aimed at high-efficiency conversion. Along with the card, ASUS bundles GPU Tweak software for overclocking and streaming assistance.

The GTX 980 uses NVIDIA's GM204 silicon die, built upon their Maxwell architecture. This die is 5.2 billion transistors for a die size of 298 mm2, built on TMSC's 28nm process. A GTX 980 uses the full GM204 core, with 2048 CUDA Cores and 64 ROPs with a 256-bit memory bus to GDDR5. The official power rating for the GTX 980 is 165W.

The ASUS GTX 980 Strix 4GB (or the full name of STRIX-GTX980-DC2OC-4GD5) runs a reasonable overclock over a reference GTX 980 card, with frequencies in the range of 1178-1279 MHz. The memory runs at stock, in this case 7010 MHz. Video outputs include three DisplayPort connectors, one HDMI 2.0 connector and a DVI-I.

Further Reading: AnandTech's NVIDIA GTX 980 Review

Thank you to Crucial for providing us with MX200/MX300 SSDs. Crucial stepped up to the plate as our benchmark list grows larger with newer benchmarks and titles, and the 1TB units are strong performers. The MX200s are based on Marvell's 88SS9189 controller and using Micron's 16nm 128Gbit MLC flash, these are 7mm high, 2.5-inch drives rated for 100K random read IOPs and 555/500 MB/s sequential read and write speeds. The 1TB models we are using here support TCG Opal 2.0 and IEEE-1667 (eDrive) encryption and have a 320TB rated endurance with a three-year warranty.

Further Reading: AnandTech's Crucial MX200 (250 GB, 500 GB & 1TB) Review

Thank you to Corsair for providing us with Vengeance LPX DDR4 Memory

Corsair kindly sent a set of their Vengeance LPX low profile, high-performance memory. The heatsink is made of pure aluminum to help remove heat from the sticks and has an eight-layer PCB. The heatsink is a low profile design to help fit in spaces where there may not be room for a tall heat spreader; think a SFF case or using a large heatsink.

BIOS And Software System Performance
POST A COMMENT

30 Comments

View All Comments

  • DigitalFreak - Thursday, July 26, 2018 - link

    The M.2 slot furthest from the CPU is PCI-E 2.0 x4, not PCI-E 3.0. Reply
  • gavbon - Thursday, July 26, 2018 - link

    Good spot, edited and thank you :) Reply
  • DigitalFreak - Thursday, July 26, 2018 - link

    One other thing - the 3rd (x4) PCI-E slot is PCI-E 2.0, not 3.0. Reply
  • Hxx - Thursday, July 26, 2018 - link

    Gigabyte's BIOS is like the quest to create as many submenus as possible and to bury things as deep as they can be buried within those menus. Luckily my Aorus z370 gaming 7 gets the job done Reply
  • Spoelie - Thursday, July 26, 2018 - link

    Another ATX board :/

    Wanted to upgrade to Ryzen 2 on an ITX board with a 4xx chipset for "proper" precision boost support - but am still waiting on availability of the damn things.

    It's come to a point where I'm contemplating skipping this generation as well and wait for 7nm/Ryzen 3 in H1 next year - a "new" desktop nowadays is 5+ year investment anyway
    Reply
  • tarqsharq - Thursday, July 26, 2018 - link

    I've had my Asus X470 ITX board since the end of May or so?

    But yeah, waiting for the 7nm shrink might be a really good idea.
    Reply
  • 29a - Thursday, July 26, 2018 - link

    I'm in the same boat as you Spoelie, I'm wanting to upgrade but I want a board with proper precision boast on a lower end chipset in a uATX or ITX form factor but AMD has been so slow about coming out with the new chipsets that now I'm to the point that I should probably wait for Zen2 and the new GPUs. Reply
  • npz - Thursday, July 26, 2018 - link

    Everyone has at least B450 in micro ATX and Asus and Asrock has ITX boards available Reply
  • 29a - Thursday, July 26, 2018 - link

    When was the release only thing I've seen is late July? Reply
  • DanNeely - Thursday, July 26, 2018 - link

    I'm not sure which is stupider, the frag harder lights on 2 of the PCIe x16 slots, or that they cheaped out and left the 3rd normal. Reply

Log in

Don't have an account? Sign up now