BenQ has quietly released its new SW271 professional display that features a 4K resolution panel, wide color gamut support, and HDR10 support. The monitor is a smaller relative of the BenQ SW320 launched roughly a year ago, but which has a number of significant differences - the new display is officially aimed at photographers and every unit is factory-calibrated.

The BenQ SW271 relies on a 10-bit IPS panel that can reproduce 1.07 billion colors and is listed to cover 100% of the sRGB color space, 99% of the AdobeRGB color space, and 93% of the DCI-P3 color space. Unlike the bigger SW320, the SW271 uses a LED backlighting. The other specifications of the SW271 look rather standard for a high-end UHD monitor: a 3840×2160 resolution with a 60 Hz refresh rate, 350 nits typical brightness, 1000:1 static contrast, 5 ms response time and 178° viewing angles. The 350 nits brightness is usually considered too low for HDR10, although BenQ provides a shroud for better visual acuity.

Two key features of the BenQ SW271 are its support for 10-bit HDR (with a 14-bit 3D look-up table) and individual calibration to DeltaE ≤ 2 in both Adobe RGB and sRGB. Since DCI-P3 coverage of the SW271 is below 98%-99% covered by numerous displays aimed at video editors and animation designers who do post-production work, BenQ positions the product as a solution for photographers and graphics designers interested primarily in Adobe RGB. In the meantime, HDR10 is helpful for those who work on adding HDR to photos, videos and games, so the monitor is still aimed at a broader audience than other displays for artists and designers.

Speaking of graphics and video professionals, it is necessary to mention that the SW271 features BenQ’s Hotkey Puck that allows users to switch between Adobe RGB mode, sRGB mode and Black & White mode quickly, or perform other functions. Just like its bigger relative, the SW271 is set to display content in different color spaces simultaneously side-by-side in PIP/PBP modes (two inputs are required). In addition, the SW271 comes with a detachable shading hood to reduce monitor’s screen glare. Finally, the monitor has an adjustable stand that allows rotating the panel clockwise or counter-clockwise, tilt it, and swivel it.

When it comes to connectivity, the SW271 display has one DisplayPort 1.4, two HDMI 2.0 connectors, a USB 3.1 Gen 1 Type-C input (see compatibility list), and a headphone jack. All of the digital interfaces support HDCP 2.2 required for protected content. Besides this, the new monitor comes with a dual-port USB 3.0 Type-A hub as well as an SD card reader.

BenQ SW271
Panel 27" IPS
Resolution 3840 × 2160
Refresh Rate 60 Hz
Response Time 5 ms gray-to-gray
Brightness 350 cd/m²
Contrast 1000:1
Viewing Angles 178°/178° horizontal/vertical
Color Saturation 100% sRGB/REC 709
99% Adobe RGB
93% DCI-P3
Display Colors 1.07 billion
3D-LUT 14 bits
Pixel Pitch 0.1556 mm
Pixel Density 163.2
Anti-Glare Coating Yes
Inputs 1 × DP 1.4 (HDCP 2.2)
1 × USB 3.1 Gen 1 Type-C (HDCP 2.2)
2 × HDMI 2.0a (HDCP 2.2)
USB Hub 2-port USB 3.0 hub
Card Reader Integrated
Power Consumption Idle 0.5 W
Active 43.4 W

The BenQ SW271 display is now available from multiple retailers in the U.S. for around $1150, which is tangibly lower than the price of the SW320, its bigger relative, which is sold for $1499.

Gallery: BenQ SW271

Related Reading

Source: BenQ

POST A COMMENT

27 Comments

View All Comments

  • Death666Angel - Saturday, November 04, 2017 - link

    When I think "professional displays" I don't think BenQ. Interesting monitor, on paper. Reply
  • MaxdeWinter - Saturday, November 04, 2017 - link

    So you've basically said nothing whatsoever there other than "I don't like BenQs regardless of what they produce": Why bother? Reply
  • Tunnah - Saturday, November 04, 2017 - link

    I'd say the same to you, but then that'd make me an ass too. It's a comment section, he made a comment about what he thought. Reply
  • Amandtec - Monday, November 06, 2017 - link

    And again, I could also say the same to you but then this would like Inception except with ass holes instead of dreams. Reply
  • philehidiot - Monday, November 06, 2017 - link

    Did you know we all start out as arseholes? It's the first structure to form in the womb.

    As for BenQ, I do agree with the OP that you don't really associate their brand with the professional sector. They've always struck me as a gaming / consumer brand. But hey, if all they do is buy panels and repackage them (Yeh I know there's more to it than that) then there's nothing to stop them doing the same with pro panels.
    Reply
  • Death666Angel - Saturday, November 04, 2017 - link

    Please show me where I said I don't like BenQ. I passed no judgement on their brand whatsoever. Just stated my opinion that I haven't seen them be a big player in professional photography and video editing displays up to this point. But it seems that most other people got what I meant. Reply
  • npz - Sunday, November 05, 2017 - link

    They are more know for their gaming monitors, but they have been in the professional market for a long time now. I myself have known about their CAD/video/photo/etc marketed monitors since a few years ago. Reply
  • sonny73n - Sunday, November 05, 2017 - link

    I'll just say it - I don't like BenQ monitors!!! So what? They're overpriced and their colors aren't up to par. I'd take Dell's over these any day. Reply
  • chrnochime - Wednesday, November 08, 2017 - link

    Yes we "really" care that you don't like their screens. /s Reply
  • Hurr Durr - Sunday, November 05, 2017 - link

    I`m sitting at color corrected Benq GW2460 right now and I agree with Death666Angel. Granted, it`s not a professional monitor by a long shot, but I`ve seen their pro offerings as well and came away unimpressed. Benq is good for home use and that`s it. Reply

Log in

Don't have an account? Sign up now