Video Encoding Performance

Our DivX test is the same DivX / XMpeg 5.03 test we've run for the past few years now, the 1080p source file is encoded using the unconstrained DivX profile, quality/performance is set balanced at 5 and enhanced multithreading is enabled.

Xmpeg + DivX Encode

Despite the greatness that is Quick Sync, there are no editing/high quality transcode tools that support Intel's hardware transcode engine. Luckily, Sandy Bridge is still very fast when it comes to software encoding. Our WME test only shows minimal gains thanks to the architectural improvements however.

Windows Media Encoder 9 - Advanced Profile

Graysky's x264 HD test uses x264 to encode a 4Mbps 720p MPEG-2 source. The focus here is on quality rather than speed, thus the benchmark uses a 2-pass encode and reports the average frame rate in each pass.

Other than the Core i7 980X, there's nothing quicker than Sandy Bridge. The Core i7 2600K is 10% faster than the Core i7 975, and the 2500K easily outpaces its Lynnfield rivals. The i3 2100 is quicker than its predecessor, however not by much. In these heavily threaded situations, AMD's Athlon II X4 645 is a better option than the 2100.

x264 HD Benchmark - 1st Pass

x264 HD Benchmark - 2nd Pass

x264 HD 3.03 Benchmark - 1st Pass

x264 HD 3.03 Benchmark - 2nd Pass

SYSMark 2007 & Photoshop Performance 3D Rendering Performance
Comments Locked

283 Comments

View All Comments

  • IanWorthington - Monday, January 3, 2011 - link

    Not really: the board manufacturers seem to be adding usb3 chipsets w/o real problems. Good enough.
  • usernamehere - Monday, January 3, 2011 - link

    Sure, if you're building a desktop you can find plenty with USB 3.0 support (via NEC). But if you're looking for a laptop, most will still not have it. For the fact that manufacturers don't want to have to pay extra for features, when they usually get features via the chipsets already included. Asus is coming out with a handful of notebooks in 2011 with USB 3.0 (that I know of), but wide-spread adoption will not be here this year.
  • JarredWalton - Monday, January 3, 2011 - link

    Most decent laptops will have USB3. ASUS, Dell, HP, Clevo, and Compal have all used the NEC chip (and probably others as well). Low-end laptops won't get USB3, but then low-end laptops don't get a lot of things.
  • TekDemon - Monday, January 3, 2011 - link

    Even the netbooks usually have USB 3.0 these days and those almost all use intel atom CPUs. The cost to add the controller is negligible for large manufacturers. USB is not going to be the deciding factor for purchases.
  • DanNeely - Monday, January 3, 2011 - link

    Are you sure about that? Newegg lists 99 netbooks on their site. Searching for USB 3 within netbooks returns 0 products.
  • TekDemon - Monday, January 3, 2011 - link

    Your claims are pretty silly seeing as how USB came about in the same way that Light Peak did-Intel invented USB and pushed it to legacy ports like PS/2, and slowly phased out support for the older ones entirely over the years. It makes no sense for them to support USB 3.0, especially without a real market of devices.
    But motherboard manufacturers will support USB 3.0 via add-in chips. I don't see how this anti-competitive at all, why should intel have to support a format it doesn't think makes sense? So far USB 3.0 hasn't really shown speeds close to it's theoretical, and the only devices that really need the higher bandwidth are external drives that are better off being run off E-SATA anyways. There's no real "killer app" for USB 3.0 yet.
    BTW Light Peak will easily support adding power to devices, so it definitely does not need USB in order to provide power. There'll just be two wires running alongside the fiber optics.
  • DanNeely - Tuesday, January 4, 2011 - link

    The eSata + USB (power) connector has never gone anywhere, which means that eSata devices need at least 2 cables to work. Flash drives and 2.5" HDs don't need enough power to require an external brick, and 80-90% of eSata speed is still much better than the USB2 bottleneck. With double the amount of power over USB2, USB3 could theoretically be used to run 3.5" drives with a double socket plug freeing them from the wall as well.
  • ilkhan - Monday, January 3, 2011 - link

    I've had my P67A-UD4 for almost 3 weeks now. Lets get the chips out already!

    I'm confused, however. The fist paragraph talks of 4.1Ghz turbo mode and the chart on page 2 lists 3.8Ghz as the max for the 2600K. Is the chart talking about 4-core turbo or what?
  • Spike - Monday, January 3, 2011 - link

    Isn't it an i7-2600k? The article title says "i5 2600k"... just curious...
  • Ryan Smith - Monday, January 3, 2011 - link

    Oh dear...

    Fixed. Thanks for that.

Log in

Don't have an account? Sign up now