Adobe Photoshop CS4 Performance

To measure performance under Photoshop CS4 we turn to the Retouch Artists’ Speed Test. The test does basic photo editing; there are a couple of color space conversions, many layer creations, color curve adjustment, image and canvas size adjustment, unsharp mask, and finally a gaussian blur performed on the entire image.

The whole process is timed and thanks to the use of Intel's X25-M SSD as our test bed hard drive, performance is far more predictable than back when we used to test on mechanical disks.

Time is reported in seconds and the lower numbers mean better performance. The test is multithreaded and can hit all four cores in a quad-core machine.

Adobe Photoshop CS3 - Retouch Artists Speed Test

While our Photoshop CS4 benchmark clearly prefers Intel's CPUs, the results aren't so clean cut. The entire Phenom II 800 and 900 lineup falls short of their competitors, but the Phenom II X3 720 can equal its rival: the Core 2 Duo E7500. It's slower than the more expensive E8400, but it's at least competitive.

This is where AMD has some potential to do well. As a result of its larger die, the 720 has one more core than Intel's svelte Core 2 Duos. In well threaded applications, the X3 could come out ahead.

DivX 8.5.3 with Xmpeg 5.0.3

Our DivX test is the same DivX / XMpeg 5.03 test we've run for the past few years now, the 1080p source file is encoded using the unconstrained DivX profile, quality/performance is set balanced at 5 and enhanced multithreading is enabled:

DivX 6.8.5 w/ Xmpeg 5.0.3 - MPEG-2 to DivX Transcode

Both the Phenom II 900 and 800 series parts are competitive here. The Phenom II X3 720 actually beats out both competitors here, the E7500 and E8400 are close but no faster than the 720. Here's a benefit of that extra core at work.

x264 HD Video Encoding Performance

Graysky's x264 HD test uses the publicly available x264 codec (open source alternative to H.264) to encode a 4Mbps 720p MPEG-2 source. The focus here is on quality rather than speed, thus the benchmark uses a 2-pass encode and reports the average frame rate in each pass.

x264 HD Encode Benchmark - 720p MPEG-2 to x264 Transcode

The first pass of the x264 benchmark is actually an analysis pass, the real encoding is done in the second pass. There are apparently quite a few unaligned cache accesses in this test which severely penalize the Core 2 processors; Core i7 is unaffected. Because of the unaligned cache access performance penalty, AMD owns the price/performance comparison here.

x264 HD Encode Benchmark - 720p MPEG-2 to x264 Transcode

The actual encode workload is much more competitive. The Phenom II 800 and 900 series chips cluster around each other, remaining competitive but not really any faster than the equivalently priced Core 2 Quads. The Phenom II X3 720 continues to be faster than its competitor thanks to its core count advantage.

Windows Media Encoder 9 x64 Advanced Profile

In order to be codec agnostic we've got a Windows Media Encoder benchmark looking at the same sort of thing we've been doing in the DivX and x264 tests, but using WME instead.

Windows Media Encoder 9 x64 - Advanced Profile Transcode

Here we've got, once again, a competitive AMD but there's something very interesting going on with the triple core 720. WME9 doesn't make use of the third core as it is hard coded to use powers of 2 for the number of processor cores. There are some applications that will exhibit this sort of behavior, although in our testing the numbers are limited. With its third core out of the picture, the 720 is slower than Intel's Core 2 Duo E7500.

SYSMark 2007 Performance 3dsmax 9, Cinebench, POV-Ray and par2 Performance
Comments Locked

77 Comments

View All Comments

  • just4U - Monday, February 9, 2009 - link

    I think you were a bit optimistic in your prediction that DDR3 will be at price parity with DDR2 by years end but otherwise a good review.

    I do have a question tho as I am not 100% sure on it. The cpu's that were launched in January (920/40). Are they also compatable with DDR3 boards? Or just these new cpu's?
  • faxon - Friday, May 1, 2009 - link

    really? because right now newegg is selling a 2x2GB kit of Gskill cas9 1600 for $59, and the like kit of DDR2 cas5 is only $56. all we need now is for latency on the ram to drop at the same low voltages seen on i7 kits and i would call that price parity, not that you will even really notice the latency difference except in synthetic benchmarks anymore
  • DrMrLordX - Monday, February 9, 2009 - link

    To the best of my knowledge, AM2 and AM2+ Phenom/Phenom IIs will not support DDR3. Their memory controllers just can't hack it.
  • hyc - Monday, February 9, 2009 - link

    How so? Barcelona/Phenom-I already had the dual memory controllers, they were just never enabled on any motherboards.
  • Targon - Monday, February 9, 2009 - link

    For DDR3 support you need a DDR3 supporting CPU. From the sound of it, the processors are the socket AM3 type, meaning they will work in both socket AM2+ and socket AM3 motherboards. If a processor is for socket AM2/AM2+, it will NOT work in a DDR3 motherboard.

    The way it works is simple, the DDR3 versions of the processor have both DDR2 and DDR3 memory controllers, so will work with either type of memory. The DDR2 processors(X4 940 and 920) only have a DDR2 memory controller(it is dual channel, but that isn't the same as supporting both memory types), so will only work in a socket AM2 or AM2+ motherboard.

    The X4 945 and 925(I think) will be the DDR3 supporting versions of the current chips.

    Again, you can NOT put a socket AM2+ chip in a DDR3 board, it won't work(pin is blocked in the socket to avoid frying the chip). Even if you could put the chip in a DDR3 board, without the DDR3 memory controller on the CPU, it just would not work.
  • grb1212 - Tuesday, March 16, 2010 - link

    your not totally right if u have a am2/am2+/am3 compatible board and it uses ddr3 if u use a ddr2 compatible processor ddr3 will work with a ddr2 processor but it will act like ddr2 memory as far ass performance
  • TheFace - Monday, February 9, 2009 - link

    This may help.

    http://www.tomshardware.com/reviews/socket-am3-phe...">http://www.tomshardware.com/reviews/socket-am3-phe...

    The chips released today seem to be the only ones that work in AM3. But the chips released today will also work in AM2/AM2+. It's just, as has been stated repeatedly, the chips designed for AM2/AM2+ won't work in AM3.

Log in

Don't have an account? Sign up now