ASRock Z690 Phantom Gaming 4/D5

One of ASRock's more modest and entry-level gaming-focused Z690 models comes via the Z690 Phantom Gaming 4/D5, with the D5 signifying this model supports DDR5 memory and not DDR4. Equipped with an entry-level feature set, and an equally entry-level price point to boot, the ASRock Z690 Phantom Gaming 4/D5 has one of the more basic looks of all its Z690 models. It uses a primarily black theme with simple silver heatsinks throughout. It's also one of the most bare looking PCBs from all of the Z690 models at launch, with a real focus on cutting costs for users looking for an affordable model.

Looking at the board's specifications, there are two full-length PCIe slots, with one full-length PCIe 5.0 x16 slot, one full-length PCIe 4.0 x4 slot, and three smaller PCIe 3.0 x1 slots. Located in the top right-hand corner is the board's memory slots, with four in total offering support for DDR5-5800, and a combined total of 128 GB. Storage options are relatively basic as expected for a board of this pedigree, with three PCIe 4.0 x4 M.2 slots, with one of these also supporting SATA-based drives. The ASRock Z690 Phantom Gaming 4/D5 also includes just four SATA ports with support for RAID 0, 1, 5, and 10 arrays.

On the rear panel is a modest selection of input and output, including one USB 3.2 G2 Type-C, one USB 3.2 G2 Type-A, four USB 3.2 G1 Type-A, and two USB 2.0 ports. An Intel I219-V Gigabit Ethernet controller is the board's only source of networking support, while a Realtek ALC897 powers three 3.5 mm audio jacks. Finishing off the rear panel is a single HDMI port, with a small BIOS Flashback button and a PS/2 combo port for users preferring to use legacy peripherals.

ASRock Z690 PG Velocita (DDR5) ASRock Z690 Phantom Gaming-ITX/TB4 (DDR5)
Comments Locked

126 Comments

View All Comments

  • Duwelon - Tuesday, November 9, 2021 - link

    Asus' prices are completely bananas. If I build a new rig with Z690 it'll probably be my first non-Asus build in a very long time.
  • Sivar - Tuesday, November 9, 2021 - link

    That caught my eye, too. I bought an Asus Hero-branded board for my current system last year at approximately $200 USD.
    I suspect Asus is shifting their marketspeak because the word "Maximus" (used for the z690 board but not mine) usually applies to their most expensive boards.
  • blppt - Tuesday, November 9, 2021 - link

    This. $2000 for a consumer grade motherboard? WTF are they smoking?

    Also, I'm pretty sure ASUS will be releasing some TUF Z690s at some point, probably at a lower price point than the primes. My experience with the TUF series has been very positive for the price.
  • DigitalFreak - Tuesday, November 9, 2021 - link

    They know they're not going to sell many of those. Those boards are either for LN2 e-peen competitions or people with more money than sense.
  • Wrs - Wednesday, November 10, 2021 - link

    TUF is historically just a bit more expensive than Prime. They already have a TUF DDR4 version - ordered the Wifi one for $290 the other day. If worried about price DDR5 is the first mistake.
  • blppt - Wednesday, November 10, 2021 - link

    The X570 TUF was cheaper than the X570 Prime when I went shopping for an AMD board.
  • COtech - Tuesday, November 9, 2021 - link

    Subtitle - "Intel Z690 Chipset: Like Z590, But Now With Native PCIe 4.0"

    I think "But Now With Native PCIe 5.0" is intended.
  • gavbon - Thursday, November 18, 2021 - link

    The Z690 chipset doesn't have PCIe 5.0, this comes from the CPU. The Z690 chipset does, however, now include PCIe 4.0 lanes, whereas Z590 did not.
  • Someguyperson - Tuesday, November 9, 2021 - link

    I don't get the "DP IN" ports on the ASUS ProArt Z690 Creator WIFI. I see the author just wrote what was on the ASUS website, but that doesn't really explain anything. Are they passthrough to the Thunderbolt out ports? Is there a capture card built into this motherboard? I'm very confused by the labeling here.
  • uwsalt - Tuesday, November 9, 2021 - link

    Those are passthrough to the Thunderbolt port. Add-in Thunderbolt cards work the same way. You slot in your discrete GPU, send the output from both DP ports to the Thunderbolt controller, and then use Thunderbolt to output to a Thunderbolt monitor or hub.

Log in

Don't have an account? Sign up now