Biostar Racing B550GTQ

In addition to its ATX sized B550GTA, the Biostar Racing B550GTQ is a micro-ATX sized model with the same design and near-identical feature set of its larger sibling. Looking more like an entry-level offering, the biggest features include a pair of M.2 slots, six SATA ports, a Realtek Gigabit Ethernet controller and a Realtek ALC1150 HD audio codec.

Following a consistent black and grey theme throughout, the Biostar Racing B550GTQ is a micro-ATX model and includes two full-length PCIe slots. This includes the top slot which runs at PCIe 4.0 x16, while the second slot is locked to PCIe 3.0 x4. Complementing the full-length slots is a pair of PCIe 3.0 x1 slots. The board's storage consists of two PCIe slots and although Biostar is advertising both to feature support for PCIe 4.0 x4, it’s likely that only one of these will support Gen4, with the other supporting up to PCIe 3.0 x4 drives. There are also six SATA ports, with four right-angled and two straight-angled ports. The B550GTQ has four available memory slots, with support for up to DDR4-4400, with a maximum capacity of up to 128 GB.

The rear panel includes a single USB 3.2 G2 Type-C, one USB 3.2 G2 Type-A, four USB 3.2 G1 Type-A, and two USB 2.0 ports. Powering the single RJ45 port is a Realtek RTL8118AS Gigabit Ethernet controller, while the boards three 3.5 mm audio jacks are controlled by a Realtek ALC1150 HD audio codec. Biostar has included three video outputs with DVI-D, HDMI and DisplayPort, which gives users plenty of VGA options to consider if pairing up this board with a Ryzen APU. Finishing off the rear panel is a PS/2 keyboard and mouse combo port.

Biostar hasn’t unveiled pricing at present for either of its B550 models, but it’s likely the B550GTQ will cost under $100 based on the feature set in comparison to what other vendors are offering. Biostar is consistently using an older Realtek ALC1150 HD audio which was commonly found on motherboards around five years ago.

Biostar B550GTA GIGABYTE B550 Aorus Master
POST A COMMENT

100 Comments

View All Comments

  • Savikid - Tuesday, August 25, 2020 - link

    But the new oculus stuff only uses 1 usb port, so that right there is a drop. I use 2 for keyboard and mouse, one for a wireless controller, and one for my HMD. Reply
  • Gigaplex - Tuesday, June 16, 2020 - link

    "On that one I added a USB PCI card to get enough ports."

    That's not really helpful to the user who said they can't add in a card on their mITX system.
    Reply
  • eye4bear - Wednesday, July 1, 2020 - link

    Must be nice to have no external hard-drives, I have 3 all needing their own USB 3 port, along with a Logitech dongle that runs both my mouse and keyboard, finally a Bluethooth dongle as my computer has none built-in. Yes I would need 6 USB ports (one open for USB sticks) just to keep even. Reply
  • consolessuck - Friday, November 6, 2020 - link

    No, I have 3 usb ports on my laptop and i only use 1 for my mouse. As it turns out, the most amount of usb ports i use at once is two when i am making a wired data transfer with my mouse plugged in. Actually, I almost never transfer data to my phone with a wire, instead just sharing them via bluetooth. and considering i never make large data transfers to my phone, this works out just fine. as for a desktop, however, i'd like a minimum of 3 as i'll always have not only a mouse, but a keyboard plugged in all the time. Reply
  • taz-nz - Thursday, June 18, 2020 - link

    The Asrock B550M Steel Legend has 8 port on the back:
    4x USB-A 3.1 ports
    1x USB-A 3.2 port
    1x USB-C 3.2 port
    2x USB-A 2.0 ports

    And you still have two USB 2.0 internal header, plus two USB 3.1 internal headers.
    So that allows you to have another
    4x USB-A 3.1
    4x USB-A 2.0 ports.

    so that's 16 Ports
    Now if you like me and need Internal USB 3.2 USB-C header, you can use the PCIe 3.0 x2 m.2 slot to add one of these:
    https://www.delock.de/produkte/S_63998/merkmale.ht...

    or if you want two more USB 3.1 internal header you could add one of these:
    https://www.delock.de/produkte/G_62843/merkmale.ht...

    So if you can live without a second m.2 slot you have four more USB-A 3.0 ports.
    That gives you 20 USB ports without giving up a PCIe slot.
    Reply
  • taz-nz - Thursday, June 18, 2020 - link

    oops, just noticed you said mITX not mATX Reply
  • desii - Tuesday, June 16, 2020 - link

    Do any of these motherboards support ECC RAM (either buffered or unbuffered)? Reply
  • drSeehas - Wednesday, June 17, 2020 - link

    Socket AM4 CPUs support only unbuffered RAM. Reply
  • PixyMisa - Wednesday, June 17, 2020 - link

    I did a quick look on ASRock's site, since they're pretty good on ECC support, and every B550 board I checked lists ECC as supported. Reply
  • Samus - Tuesday, June 16, 2020 - link

    I think AMD screwed up here with pricing their platforms appropriately. I understand the push for PCIe 4 but they can't have average motherboard prices hovering between $200-$300. There has to be $100 motherboards to be taken seriously especially by OEM's if they want 4000 parts to become mainstream.

    But maybe they don't...maybe they plan to milk the 3000 parts for a few years. After all, there isn't much reason not too. They have no competition from Intel in the budget segment right now.
    Reply

Log in

Don't have an account? Sign up now