The Intel Optane Memory H10 Review: QLC and Optane In One SSD
by Billy Tallis on April 22, 2019 11:50 AM ESTMixed Random Performance
Our test of mixed random reads and writes covers mixes varying from pure reads to pure writes at 10% increments. Each mix is tested for up to 1 minute or 32GB of data transferred. The test is conducted with a queue depth of 4, and is limited to a 64GB span of the drive. In between each mix, the drive is given idle time of up to one minute so that the overall duty cycle is 50%.
The performance of the Optane Memory H10 on the mixed random IO test is worse than either half of the drive provides on its own. The test covers a wider span than the 32GB Optane cache can handle, so the caching software's attempts to help end up being detrimental.
 |
|||||||||
The QLC portion of the H10 performs similarly to the Optane caching configuration during the read-heavy half of the test, though the caching makes performance less consistent. During the write heavy half of the test, the QLC-only configuration picks up significant speed over the Optane caching setup, until its SLC cache starts to run out at the very end.
Mixed Sequential Performance
Our test of mixed sequential reads and writes differs from the mixed random I/O test by performing 128kB sequential accesses rather than 4kB accesses at random locations, and the sequential test is conducted at queue depth 1. The range of mixes tested is the same, and the timing and limits on data transfers are also the same as above.
The Optane Memory H10 averages a bit better than SATA SSDs on the mixed sequential IO test, but there's a significant gap between the H10 and the high-end TLC-based drives. This is another scenario where the Optane caching software can't find a way to consistently help, and the H10's overall performance is a bit lower than it would have been relying on just the QLC NAND with its SLC cache.
 |
|||||||||
The caching software contributes to inconsistent performance for the Optane Memory H10 but the general trend is toward lower performance as the workload becomes more write heavy. The QLC portion on its own is able to increase speed during the second half of the test because it is quite effective at combining writes.
Facebook
Twitter
RSS
60 Comments
View All Comments
Flunk - Monday, April 22, 2019 - link
This sounded interesting until I read software solution and split bandwidth. Intel seems to be really intent upon forcing Optane into products regardless if they make sense or not.Maybe it would have made sense with SSDs at the price points they were this time last year, but now it just seems like pointless exercise.
PeachNCream - Monday, April 22, 2019 - link
Who knew Optane would end up acting as a bandage fix for QLC's garbage endurance? I suppose its better than nothing, but 0.16 DWPD is terrible. The 512GB model would barely make it to 24 months in a laptop without making significant configuration changes (caching the browser to RAM, disabling the swap file entirely, etc.)IntelUser2000 - Monday, April 22, 2019 - link
The H10 is a mediocre product, but endurance claims are overblown.Even if the rated lifespan is a total of 35TB, you'd be perfectly fine. The 512GB H10 is rated for 150TB.
The amount of users that would even reach 20TB in 5 years are in the minority. When I was actively using the system, my X25-M registered less than 5TB in 2 years.
PeachNCream - Monday, April 22, 2019 - link
Your usage is extremely light. Endurance is a real-world problem. I've already dealt with it a couple of times with MLC SSDs.IntelUser2000 - Monday, April 22, 2019 - link
SSDs are over 50% of the storage sold in notebooks. It's firmly reaching mainstream there.I would say instead I think most of *your* customers are too demanding. Vast majority of the folks would use less than me.
The market agrees too, which is why we went from MLC to TLC, and now we have QLCs coming.
Perhaps you are confusing write-endurance with physical stress endurance, or even natural MTBF related endurance.
PeachNCream - Monday, April 22, 2019 - link
I haven't touched on any usage but my own so far. The drives' own software identified the problems so if there is confusion about failures, that's in the domain of the OEM. (Note, those drives don't fail gracefully either so that data can be recovered. It's a pretty ugly end to reach.) As for the move from MLC to TLC and now QLC -- thats driven by cost sensitivity for given capacities and ignores endurance to a great extent.IntelUser2000 - Monday, April 22, 2019 - link
I get the paranoia. The world does that to you. You unconsciously become paranoid in everything.However, for most folks endurance is not a problem. The circuit in the SSD will likely fail of natural causes before write endurance is reached. Everything dies. But people are just excessively worried about NAND SSD write endurance because its a fixed metric.
It's like knowing the date of your death.
PeachNCream - Friday, May 3, 2019 - link
That's not really a paranoia thing. You're attempt to bait someone into an argument where you can then toss out insults is silly.SaberKOG91 - Monday, April 22, 2019 - link
That's a naive argument. Most SSDs of 250GB or larger are rated for at least 100TBW on a 3 year warranty. 75TBW on a 5 year warranty is an insult.I think you underestimate how much demand the average user makes of their system. Especially when you have things like anti-virus and web browsers making lots of little writes in the background, all the time.
The market is going from TLC to QLC because of density, not reliability. We had all the same reliability issues going from MLC to TLC and from SLC to MLC. It took years for each transition for manufacturers to reach the same durability level as the previous technology, all while seeing the previous generation continuing to improve even further. Moving to denser tech means smaller dies for the same capacity or higher capacity for unit area which is good for everyone. But these drives don't even look to have 0.20DWPD or 5 year warranty of other QLC Flash products.
I am a light user who doesn't have a lot of photos or video and this laptop has already seen 1.3TBW in only 3 months. My work desktop has over 20TBW from the last 5 years. My home desktop where I compile software has over 12TBW in the first year. My gaming PC has 27TBW on a 5 year old drive. So while I might agree that 75TBW seems like a lot, If I were to simplify my life down to one machine, I'd easily hit 20TBW a year or 8TBW a year even without the compile machine.
That all said, you're still ignoring that many Micron and Samsung drives have been shown to go way beyond their rated lifespan whereas Optane has such horrible lifespan at these densities that reviewers destroyed the drives just benchmarking them. Since the Optane is acting as a persistent cache, what happens to these drives when the Optane dies? At the very least performance will tank. At the worst the drive is hosed.
IntelUser2000 - Monday, April 22, 2019 - link
Something is very wrong with your drive or you are not really a "light user".1300GB in 3 months equals to 14GB write per day. That means if you use your computer 7 hours a day you'd be using 2GB/s hour. The computer I had the SSD on I used it for 8-12 hours every day for the two years and it was a gaming PC and a primary one at that.
Perhaps the X25-M drive I had is particularly good at this aspect, but the differences seem too much.
Anyways, moving to denser cells just mean consumer level workloads do not need the write endurance MLC needs and lower prices are preferred.
"Optane has such horrible lifespan at these densities that reviewers destroyed the drives just benchmarking them."
Maybe you are referring to the few faulty units in the beginning? Any devices can fail in the first 30 days. That's completely unrelated to *write endurance*. The first gen modules are rated for 190TBW. If they played around for a year(which is unrealistic since its for a benchmark), they would have been using 500GB/s day. Maybe you want to verify your claims yourself.