The AMD X570 Motherboard Overview: Over 35+ Motherboards Analyzed
by Gavin Bonshor on July 9, 2019 8:00 AM ESTColorful CVN X570 Gaming Pro V14
While not usually a brand found regularly in the western parts of the world, we saw an X570 model from Colorful, or as they are sometimes referred to, iGame. The Colorful CVN X570 Gaming Pro V14 is a little bit of a mouthful to say, but it has a modest feature set onboard with a Realtek Gigabit NIC, two USB 3.1 G2 ports on the rear panel, as well as two PCIe 4.0 M.2 slots. It's aesthetic is quite clean looking with a black and silver design, with a red accented X570 chipset heatsink fan. The CVN series is inspired by militaristic warfare with previous models from iGame taking its design from US Naval aircraft carriers; this is signified by the fighter jet graphics on the boards PCB.
In the top right-hand corner of the board are four memory slots with support for up to DDR4-3466 memory which pails in comparison to the current compatibility from other vendors, even on the cheaper section of the product stack. There are three full-length PCIe 4.0 slots which operate at x16, x8/x8, and x8/x8/x4; this means two-way NVIDIA SLI and up to three-way AMD CrossFire is supported. On top of that are two PCIe 4.0 x1 slots, while sandwiched between these are two PCIe 4.0 x4 M.2 slots, each with its own heatsink attached. Also included are six SATA ports with support for RAID 0, 1 and 10 arrays.
On the rear panel is a single USB 3.1 G2 Type-A, a single USB 3.1 G2 Type-C, four USB 3.1 G1 Type-A and two USB 2.0 ports. Also featured is a HDMI and DisplayPort pairing of video outputs are present which allows users to use the integrated Vega graphics cores of the Ryzen APUs, while the boards six 3.5 mm audio jacks are powered by an ageing Realtek ALC1150 HD audio codec; not seen one of these used for a very long time on a consumer chipset. The CVN X570 Gaming Pro V14's NIC of choice is the Realtek RTL8118AS Gigabit controller which controls the single Ethernet port on the rear panel.
The Colorful CVN X570 Gaming Pro V14 pricing and availability is currently unknown, but we will update once we receive this information. It does feature an interesting controller set, especially the inclusion of an older Realtek ALC1150 HD codec, which would probably make this model one of the cheapest X570 boards around; one would assume. There is support for two-way NVIDIA SLI and the two PCIe 4.0 x4 M.2 slots do include heatsinks but is let down again by the lacklustre memory support (DDR4-3466).
Facebook
Twitter
RSS
225 Comments
View All Comments
DigitalFreak - Tuesday, July 9, 2019 - link
I think the only advantage of using a 2000 series CPU with an X570 board will be PCIe 3.0/4.0 support. The X370/X470 only supported PCIe 2.0. In theory, the connection from the 2000 processor to the X570 chipset should run at PCIe 3.0 speeds.FreckledTrout - Tuesday, July 9, 2019 - link
The x370 chipset and x470 both supported PCIe 3.0 with either a 1xxx or 2xxx Ryzen CPU. If you are not running a 3xxx CPU in the x570 board there isn't any major feature that should cause one to want to upgrade.DigitalFreak - Tuesday, July 9, 2019 - link
@FreckledTrout - Yes and no. The interconnect between the CPU and the chipset is PCIe 3.0 on X370 / X470, but all the PCIe lanes that come off the chipset are 2.0. Running a 2000 series CPU in an X570 board would give you a PCIe 3.0 link between the CPU and the chipset, with either PCIe 3.0 or 4.0 lanes coming off the chipset (depends on if AMD drops everything to PCIe 3.0 with a 2000 series processor).extide - Tuesday, July 9, 2019 - link
It looks like they still allow the chipset lanes to be 4.0. So you'd have 3.0 link to cpu, but 4.0 from chipset to devices.Targon - Thursday, July 11, 2019 - link
Since you have at least one or two PCI Express slots that are connected to the CPU, not chipset, that almost becomes a non-issue. On my Asus ROG Crosshair VI Hero(X370), you have PCI Express 3.0 x16 for the first slot, or x8/x8. The third PCI Express x16 slot is a 2.0 I believe, which is still enough to get the job done for many devices. Even with the X570 board with a first or second generation Ryzen processor, the most you end up with is an extra 3.0 supporting slot. Note that many boards may have x16 slots, but they are x8 electrically, so you won't see the full bandwidth anyway in those slots.sorten - Tuesday, July 9, 2019 - link
Thanks Gavin! This is a great resource and is exactly what I needed to help build my new system.willis936 - Tuesday, July 9, 2019 - link
The return of the 40mm fan! Those are the most obnoxious components ever. No one has missed them in the past ten years.Kastriot - Tuesday, July 9, 2019 - link
Buy Asrock aqua and problem solved.FreckledTrout - Tuesday, July 9, 2019 - link
I'm waiting for the next iteration of board for this reason. I'm speculating the next round the chipset will be on 7nm.abufrejoval - Tuesday, July 9, 2019 - link
The genious about that chiplet design is that the chipset doesn't actually benefit nearly as much from the shrink, as pure logic or SLC caches: The monolithic guys pay the 7nm overhead (e.g. EUV) for I/O while the geometry of the transistors in the I/O area is mostly determined by the need to power long motherbord or even slot traces.So while waiting is never a bad idea when your need clearly isn't overwhelming you, waiting for that shrink could turn out rather long. These days I/O heave chips might never be done in smaller geometries, because of that and because packaging has matured.