Colorful CVN X570 Gaming Pro V14

While not usually a brand found regularly in the western parts of the world, we saw an X570 model from Colorful, or as they are sometimes referred to, iGame. The Colorful CVN X570 Gaming Pro V14 is a little bit of a mouthful to say, but it has a modest feature set onboard with a Realtek Gigabit NIC, two USB 3.1 G2 ports on the rear panel, as well as two PCIe 4.0 M.2 slots. It's aesthetic is quite clean looking with a black and silver design, with a red accented X570 chipset heatsink fan. The CVN series is inspired by militaristic warfare with previous models from iGame taking its design from US Naval aircraft carriers; this is signified by the fighter jet graphics on the boards PCB.

In the top right-hand corner of the board are four memory slots with support for up to DDR4-3466 memory which pails in comparison to the current compatibility from other vendors, even on the cheaper section of the product stack. There are three full-length PCIe 4.0 slots which operate at x16, x8/x8, and x8/x8/x4; this means two-way NVIDIA SLI and up to three-way AMD CrossFire is supported. On top of that are two PCIe 4.0 x1 slots, while sandwiched between these are two PCIe 4.0 x4 M.2 slots, each with its own heatsink attached. Also included are six SATA ports with support for RAID 0, 1 and 10 arrays.

On the rear panel is a single USB 3.1 G2 Type-A, a single USB 3.1 G2 Type-C, four USB 3.1 G1 Type-A and two USB 2.0 ports. Also featured is a HDMI and DisplayPort pairing of video outputs are present which allows users to use the integrated Vega graphics cores of the Ryzen APUs, while the boards six 3.5 mm audio jacks are powered by an ageing Realtek ALC1150 HD audio codec; not seen one of these used for a very long time on a consumer chipset. The CVN X570 Gaming Pro V14's NIC of choice is the Realtek RTL8118AS Gigabit controller which controls the single Ethernet port on the rear panel.

The Colorful CVN X570 Gaming Pro V14 pricing and availability is currently unknown, but we will update once we receive this information. It does feature an interesting controller set, especially the inclusion of an older Realtek ALC1150 HD codec, which would probably make this model one of the cheapest X570 boards around; one would assume. There is support for two-way NVIDIA SLI and the two PCIe 4.0 x4 M.2 slots do include heatsinks but is let down again by the lacklustre memory support (DDR4-3466).

Biostar X570 Racing GT8 GIGABYTE X570 Aorus Xtreme
Comments Locked

225 Comments

View All Comments

  • mikato - Thursday, July 11, 2019 - link

    That’s great to hear. I wonder why they don’t put a decent heatsink on there like they did a long time ago (Penguin 4 days maybe). Is it still too much heat for a big heatsink with no fan?
  • Makaveli - Tuesday, July 9, 2019 - link

    Thank you for this round up and more importantly the summary page at the end.

    I think I going with the ASUS Prime X570-Pro for my build, its the most affordable in CAD.
    Never was interested in Wifi on a Desktop PC yuck and the rest if just way too over priced.

    I do like the simple look of the ASUS Pro WS X570-Ace but for $500 CAD not interested at that price you might aswell go Threadripper.
  • Andy Chow - Tuesday, July 9, 2019 - link

    I still don't understand why all these boards have HDMI and/or DP on them. Virtually every Intel consumer CPU has an iGPU in it, so it makes sense there. For AMD, I want MOAR CORES, not an iGPU. So that's 1-2 ports that will never get used, which could have been a couple of usb-3 ports.
  • Qasar - Tuesday, July 9, 2019 - link

    i bet they are for future zen 2 based APUs....
  • Qasar - Tuesday, July 9, 2019 - link

    or current ones for that matter
  • Death666Angel - Wednesday, July 10, 2019 - link

    Because AMD also has iGPU enabled CPUs (which they call APUs). And economies of scale being what they are, this makes more sense than having separate SKUs. Also, do you actually use up all 8 to 12 USB ports on the back?
  • The_Assimilator - Wednesday, July 10, 2019 - link

    It's so that the manufacturers can get more negative reviews on online shopping sites. "I BOUGHT THIS BOARD BECAUSE IT HAS DISPLAY OUTPUTS BUT THEY DON'T WORK SO I'M GIVING IT 1 STAR EVEN THOUGH I DIDN'T BOTHER TO DO THE 5 MINUTES OF RESEARCH IT WOULD'VE TAKEN TO EDUCATE MYSELF AS TO WHAT I NEED FOR THE DISPLAY OUTPUTS TO WORK".

    I agree with you that more USB ports instead would be a lot more useful.
  • mikato - Thursday, July 11, 2019 - link

    Upvote
  • boozed - Tuesday, July 9, 2019 - link

    The last page is a godsend, more of this kind of thing please!
  • NOTELLN - Tuesday, July 9, 2019 - link

    This data is wrong. These are not the proper core counts. For example, the International Rectifier IR35201 PWM controller can only do 8+0, 7+1, or 6+2, making the MSI pro and gaming plus 4+2 phase boards. You boys need to go back to the drawing board.

Log in

Don't have an account? Sign up now