Conclusion

iBuyPower and system builders like them present users with an expedient option for buying a custom PC, taking all the building and testing hassle away and just leaving the 'plug it in and play' portion for the user. iBuyPower gives potential buyers a broad array of options to choose from including the case, down to wire lighting so it can really be a one-stop shop for those who may not want to build or feel uncomfortable building their own PC. 

The Element system we have runs for $2199. If someone decided to build a system like this themselves, the cost would be around $250 less, but of course it wouldn't be built, configured, and tested out of the box for you. It takes hours to install hardware properly and route cables neatly as well as additional time to set up your OS and system, including overclocking as you like it. In some cases that process can be rewarding, and in other cases the desired reward is saving that time – albeit at an additional expense – something that can be worthwhile even for those who can put together their own PC. There is also a matter of tech support which a system builder provides, but when building your own, users are generally left to fend for themselves and find homes in forums such as ours. This is the value system builders can bring to the user. 

We saw in our performance testing the iBuyPower system performs as it should out of the box which is what is to be expected. The overclock to 5 GHz for all cores on the Core i7-8086K processor improves performance across the board, making quick work against the lower clocked stock i7-8700K. One item of note with overclocking this system is to be sure adequate cooling is selected. Though the 120mm CLC kept things under the throttling point after a bit of tweaking, it was already at the limits so a warmer than average room (my office is kept at ~22C) it may be a tipping point. Because of this overclocking further, expecting to pass a stress test under 90C was a reach. Cooler is usually better and I would recommend a 2x120/140mm CLC for this processor if you want it to run at 5 GHz with little worry.

So where does that leave us? As someone who has built PCs with my own hands for well over 20 years, it can be difficult to find a lot of value in any system builder. But taking a step back and putting myself in the other 90% of people's shoes who do not have the experience and the worry removed from building a system and getting it set up for you can be priceless. The amount of time it can save and still have a quality system on your desk can easily be worth the price premium. The website, though it can be intimidating with so many options, was easy to work through and build systems with. Users can select to choose within the framework of their signature lines or build a completely custom system using the substantial catalog of parts they offer. Be it an AMD, Intel, or NVIDIA fan, small form factor or full tower, iBuyPower can put together some great looking and performing PCs and have done so with the nicely configured Element we had to play with. 

Gaming Performance
Comments Locked

50 Comments

View All Comments

  • casteve - Sunday, July 8, 2018 - link

    Thanks for the article.

    The DPC latency result, while great, is way lower than previous Coffee Lake results
    https://www.anandtech.com/show/12634/gigabyte-h370...
    which also don't map into the 101us number in this article's table....
  • Joe Shields - Monday, July 9, 2018 - link

    The 101 value, and that 'i7-8700K system' is based off results from a yet to be published motherboard review of the Z370 Taichi.
  • casteve - Monday, July 9, 2018 - link

    Cool beans. The Taichi seems to be a decent board. I look forward to the review....and it would be great if you have the chance to delve into the whys and hows on DPC Latency for the two most recent reviews jumping into the awesome range from the last year's worth of mediocre results.

    Until now I had lumped the 3xx series chipsets into the 'every few years Intel drops the ball on DPC latency" bucket.
  • Joe Shields - Tuesday, July 10, 2018 - link

    The changes we've seen in DPC latency on this platform have come after we started testing with Spectre/Meltdown patches installed and active as well as an OS update.

    I need to eventually go back and test other boards to confirm, but outside of the board(s), no other changes were made outside of what i mentioned above.
  • casteve - Tuesday, July 10, 2018 - link

    Thanks!
  • Arbie - Sunday, July 8, 2018 - link

    I think it's valuable to look at pre-built offerings occasionally. Even somepne who can build may not have the time or inclination.

    I agree that in this case the front page photos were confusing. I kept reading the results wondering where the dual-GPU came in.
  • Vanguarde - Sunday, July 8, 2018 - link

    What a joke of a system. They used the bottom tier Asus “Tuf” line which used to be good, but now is crap.
    I only purchase Falcon Northwest computers. Period. No other company does it as well as they do. Period.
  • catavalon21 - Sunday, July 8, 2018 - link

    "...it was already at the limits so a warmer than average room (my office is kept at ~22C) it may be a tipping point."

    In much of the US, 22C / 71.6F is not warmer than average for an office or for a home computing environment.

    I guess your point is that for most of us, system temps would be an issue?
  • Joe Shields - Monday, July 9, 2018 - link

    What was said there is an average room is around 22C/~72F. If it is any warmer, that could tip things. But it depends on the CPU sample, cooler chosen etc. Overclocking a i7-8700K to 5 GHz all cores without an AVX offset isn't really a task for most 120mm radiators.
  • catavalon21 - Monday, July 9, 2018 - link

    Thanks. It was late...

Log in

Don't have an account? Sign up now