At Computex 2019, ASUS unveiled a number of ROG-branded motherboards aimed at gamers and enthusiasts for AMD's new X570 chipset. Most of them are ATX, but a small handful of models are designed for small form factor users and the ASUS ROG Strix X570-I Gaming is one such model with a mini-ITX sized PCB. The main features include Wi-Fi 6 support, dual PCIe 4.0 x4 M.2 slots, and dual video outputs on the rear panel.

The ASUS ROG Strix X570-I Gaming is gaming-focused and represents its more mid-range Strix brand. On the smaller Mini-ITX form factor, the X570-I Gaming has plenty to shout about including two PCIe 4.0 M.2 slots with one located on the front of the board with an inclusive heatsink, and another located on the rear of the PCB. Also featured which is impressive for a mini-ITX model is eight SATA ports. Similar to the widely anticipated Mini-DTX form factor ROG Crosshair VIII Impact model, the ROG Strix X570-I shares the same networking configuration with an Intel I211-AT Gigabit LAN port on the rear, as well as an Intel AX200 802.11ax Wi-Fi 6 wireless interface which also includes support for BT 5.

Aimed at the mid to high-end gamers, the ASUS ROG Strix X570-I Gaming has a ROG SupremeFX S1220 HD audio codec with three USB 3.1 G2 Type-A, one USB 3.1 G2 Type-C, and four USB 3.1 G1 Type-A ports on the rear panel. Interestingly ASUS includes a DisplayPort 1.4 and HDMI 2.0 pairing of video outputs on the rear for use with the newly announced AMD Ryzen 3000 series APUs. There is a single full-length PCIe 4.0 x16 slot in addition to two memory slots with support for up to 64 GB of DDR4 memory.

No official pricing has been made available for the ROG Strix X570-I Gaming, but it's highly likely that the board will be available for purchase on 7/7 in line with AMD's Ryzen 3000 series processors such as the Ryzen 9 3900X which has 12 cores, 24 threads and is set to cost just $499.

Want to keep up to date with all of our Computex 2019 Coverage?
 
Laptops
 
Hardware
 
Chips
 
Follow AnandTech's breaking news here!
POST A COMMENT

22 Comments

View All Comments

  • dogie - Friday, June 14, 2019 - link

    Needs more blur - can still see too many details Reply
  • Mr Perfect - Friday, June 14, 2019 - link

    I think there's one of those weedy little fans in the back shroud, under the branding. Reply
  • Rocket321 - Friday, June 14, 2019 - link

    I think it would be smart to wait for some refresh designs later in the year to see if any manage to cool the chipset passively. Back in the 90's/00's a lot of boards came with these tiny fans and they were very often the fist thing to die in a system. Reply
  • HideOut - Friday, June 14, 2019 - link

    I used to stock those mini fans (probably still have some). Reply
  • Ej24 - Friday, June 14, 2019 - link

    If they're standard 40mm that'd be great. Slap a noctua 40mm on there and call it a day. But I have my doubts. It's probably a 37.2mm fan or some other horrible unorthodox size. Reply
  • WithoutWeakness - Friday, June 14, 2019 - link

    Seriously. Taken with a Huawei P30 Pro and it's still this blurry? I know you guys are moving quickly booth-to-booth and only have so much time to snap a pic but at least take 2-3 pictures real quick so you at least get one clear photo. Reply
  • PeachNCream - Friday, June 14, 2019 - link

    I'm not usually one to complain about photos since "gets the point across" is good enough, but this is pretty bad. I've taken better photos on my refurb LG Rebel 3 phone that cost me all of $10 USD. Anandtech must be a shoestring budget if its not equipping its people with a cheap point-n-shoot for Computex. Reply
  • imaheadcase - Friday, June 14, 2019 - link

    Prob did burst mode, and just uploaded the first blurred pic instead of corrected one it shows. Reply
  • megadirk - Friday, June 14, 2019 - link

    Are PCIe Gen 4.0 M.2 slots backwards compatible with Gen 3.0 NVME drives? Reply
  • Reflex - Friday, June 14, 2019 - link

    Yes Reply

Log in

Don't have an account? Sign up now