ATI Radeon 9100 IGP PRO Specifications



CPU INTERFACE
  • Up to 800MHz CPU FSB for Intel® Pentium® 4 Processor
  • Supports Intel® Hyper-ThreadingTM processors
SYSTEM LOGIC FEATURES
  • AGP 3.0 compliant AGP 8X interface
  • 266MB/second point-to-point interface to ATI IXP in A-Link mode
  • Unified Memory Architecture (UMA)
  • Dual channel 128-bit DDR SDRAM memory interface
  • DDR400 SDRAM support provides up to 6.4 GB/second bandwidth
  • Up to 4 GB DRAM support with two un-buffered SO-DIMMs
  • 16 MB to 128 MB of main memory configurable as display memory
  • Up to 8 USB 2.0 ports
  • Up to 2 SATA devices
  • Support for 6 channel AC-97 codecs
3D GRAPHICS FEATURES
  • Hardware with pixel shader 1.4 support
  • Supports up to 2048x1536 @ 32bpp.
  • Supports 3D textures and Microsoft® DirectX® texture compression
  • Anisotropic texture filtering and Full Screen Anti-Aliasing (FSAA)
VIDEO FEATURES
  • Integrated hardware motion compensation and iDCT
  • Enhanced MPEG-2 hardware decode
  • Hardware DVD sub-picture decode
2D GRAPHICS FEATURES
  • Highly optimized 128-bit 2D Engine
  • Supports a maximum resolution of 2048x1536 @ 32bpp.
DISPLAY CONTROLLER
  • Dual CRT controllers provide independent dual display support
  • Integrated high precision 300MHz triple 10-bit DAC supports resolutions up to 2048x1536
FLAT PANEL MONITOR SUPPORT
  • 12-bit digital output to support DVI, DFP and VESA P&D via external TMDS
  • Supports up to 1600x1200 screen resolution for LCD panels
TV-OUT SUPPORT
  • Integrated TV encoder with composite, S-Video, and RGB interfaces
  • Supports PAL/NTSC TV formats
  • 10-bit DAC with 8-tap filter and ATI-exclusive enhancements
  • Macrovision 7.02 copy protection standard
  • Supports up to 1024x768 32bpp mode
OPTIMIZED SOFTWARE SUPPORT
  • Microsoft DirectX 8.1 and OpenGL® drivers
  • Unified driver support for all RADEON discrete and integrated graphics products
  • Support for Microsoft Windows® XP, Windows® 2000, and Windows® Me

A Closer Look at ATI 9100 IGP PRO ATI 9100 IGP PRO Reference Board: Basic Features
POST A COMMENT

24 Comments

View All Comments

  • Wesley Fink - Wednesday, May 5, 2004 - link

    My apologies. The chart was supplied by ATI and shows a Clock Speed of 300 and a Ramdac of 400. Reply
  • SocrPlyr - Wednesday, May 5, 2004 - link

    The comparison sheet on page 10 definately has 400MHz for the RAMDAC...
    it is a picture, and pictures don't lie :)

    Josh
    Reply
  • Wesley Fink - Tuesday, May 4, 2004 - link

    The comparison sheet on page 10 states the Ramdac speed is 300MHz, exactly what was stated when the review was published. Where is the comparison sheet that states 400 for the Ramdac speed?
    Reply
  • quanta - Tuesday, May 4, 2004 - link

    Are you sure the RAMDAC on 9100 IGP Pro is really 400MHz? The ATI site says it is 300MHz, but the comparison sheet in your site says 400MHz. Reply
  • gofor55 - Tuesday, May 4, 2004 - link

    Does anybody know whether 9100IGP Pro will run ATI's Multimedia Center 9.0 and EazyShare. This might be just the ticket for a low cost multimedia PC for living room and bedroom to view PVR captures from a networked media server. Reply
  • Pumpkinierre - Tuesday, May 4, 2004 - link

    So Wesley any indications in that ATI note as to how they optimise for Prescott?
    Reply
  • Wesley Fink - Tuesday, May 4, 2004 - link

    ATI confirmed SATA RAID was present on RS350, not AOpen. Must have been a petit mal . . . Reply
  • Wesley Fink - Tuesday, May 4, 2004 - link

    #12 -
    AOpen has confirmed that RS350 DOES support SATA RAID 0,1. We confiormed SATA RAID works fine with a pair of WD Raptors in a stripe.

    The review will be updated to correct the SATA information.
    Reply
  • Kai920 - Tuesday, May 4, 2004 - link

    #14 - Very well said.

    I like how IGPs keep improving --say goodbye to Intel Extreme Graphics 2 and onboard GF4MX. The IGP may very well be a major decision in my future purchases, if not the next.
    Reply
  • Wesley Fink - Monday, May 3, 2004 - link

    #12 -
    Asute of you to catch the Sata RAID in the diagram. Unfortunately the diagram also shows IXP 300 when the board had an IXP 320.

    We have asked ATI for clarification on whether SATA RAID is an option. They are all in Barcelona, Spain for the big X800 kick-0ff tomorrow, so we might not have an answer for a few days.

    #10 -
    As for the comment about mfg suck-up, GET REAL. Mfgs HOPE they will get a good review from us because we are honest, but more often than not mfgs complain we are too negative in pointing out failings with their product. That means we probably have it about right.

    #4 - If you bothered to read the review you would have found the MAIN message was the RS350 competes very well with Intel AS A CHIPSET, which SHOULD be of interest to you. The other news was that Prescott optimizations make Prescott a better performer than Northwood on the new chips. Yes, we coverd Integrated Graphics, because it mattered, but that was not the main point. It wasn't a slow news day - the NDA expired at 6AM today, as the X800 NDA expires tomorrow. The RS350 is a damn good chipset or I wouldn't have bothered.
    Reply

Log in

Don't have an account? Sign up now