Hot Test Results

From the tables below, it can be seen that the output power quality of the EVGA Supernova 850 G2 is well above average. The maximum voltage ripple that our instruments recorded is below 24 mV under maximum load, even with the unit heavily cross-loaded, which is nothing short of exceptional. Voltage regulation is about 2% for all voltage lines, a good figure but not unusual for a high performance power supply.

 

  Main Output
  172.78 W 428.49 W 638.78 W 845.38 W
  20.33% 50.41% 75.15% 99.46%
Line Amperes Volts Amperes Volts Amperes Volts Amperes Volts
3.3 V 3.89 3.39 9.73 3.36 14.59 3.33 19.45 3.32
5 V 3.89 5.12 9.73 5.10 14.59 5.04 19.45 5.02
12 V 11.48 12.17 28.69 12.07 43.03 12.01 57.38 11.91

 

Line Regulation
(20% to 100% load)
Voltage Ripple (mV)
20% Load 50% Load 75% Load 100% Load CL1 12V CL2 3.3 V + 5V
3.3 V 2.1% 6 8 14 16 4 18
5 V 2.0% 8 8 12 16 8 20
12 V 2.2% 8 12 16 20 24 12

The high ambient temperature has a serious impact on the energy conversion efficiency of the EVGA Supernova 850 G2, reducing the average nominal load (20-100%) efficiency down to 89.2 % and the maximum efficiency of the PSU to 91.3%. Higher temperatures are expected to have a negative impact on the performance of any PSU but a drop of nearly 2% across the entire range is more than normal. The performance remains good but it would seem that this unit does not really like very hot environments.

With the Supernova 850 G2 being tested inside our hot box, the fan begins spinning as soon as the load exceeds 200 Watts. The thermal control circuit reacts well under these adverse conditions, ditching acoustic comfort in order to keep the temperatures of the unit within a safe limit. As such, the Supernova 850 G2 becomes notoriously loud while heavily stressed inside our hotbox, but the temperatures of the unit do not reach figures that would make us concerned about its longevity. We should clarify that the Supernova 850 G2 is not a cool-running unit, as the heatsink temperatures are rather high for such a design, but the thermal control circuit makes sure that they will not reach unsafe levels.

Cold Test Results Final Words and Conclusion
Comments Locked

22 Comments

View All Comments

  • Galatian - Friday, May 30, 2014 - link

    Why so snark? At last try some constructive criticism.

    To the Author: a ATX power supply jumper is useful for example when you set up your water cooling loop and you need to bleed in first and to check if there are any leaks. Therefore you don't want the entire system to be powered on obviously.
  • JarredWalton - Friday, May 30, 2014 - link

    Speaking as someone that has done plenty of time with Bitcoin and other cryptocurrencies -- and as the person that added that comment -- I can assure you that using it with BTC ASICs is indeed a plausible scenario, though perhaps becoming less so as everything moves to higher performance ASICs with built-in PSUs.
  • patrickjchase - Friday, May 30, 2014 - link

    An ATX P/S jumper is also useful if you want to power a storage enclosure.

    I use an 850W P/S in a Norco 4224 (4U rackmount case with 24 3.5" hot-swap bays) with an SAS expander in place of the motherboard.
  • Tunnah - Friday, May 30, 2014 - link

    To the author of this comment: you do realise you sound like a complete and utter tool ? If you have something to add, add it, no need to be such a snarky git.
  • bsim500 - Friday, May 30, 2014 - link

    "EVGA 850w review, Corsair 1500w review, Corsair 1000w review, LEPA 1700w PSU coming soon", etc.

    All very nice, but for a change, given the increasing popularity of Mini-ITX, how about a low-end PSU series test of 60-360w PSU's for non-gamers/light gamers/HTPC/office box/net box, etc, that comprise the vast majority of general usage scenario's? I mean 60-160w pico-PSU plus maybe the Seasonic G360 (lowest wattage Gold rated full ATX)?

    Removing the discrete GFX card from my main i5-3570 rig, it maxes out at all of 90w (exc monitor) 4T Prime load at 4GHz and idle's at a lowly 24w. An i3-based HTPC / office box typically draws 24-70w. Add a 7790 XBOne equivalent card, and it still barely pulls 120w max when gaming. Yet you wouldn't believe how many tech sites continue to test such usage scenarios with 800-1500w PSU's with low-watt efficiencies that are way down at 50-70%, which results in completely useless figures for the typical uses such machines are built for...
  • marc1000 - Friday, May 30, 2014 - link

    I believe they already did one small-psu test over here, but I'm not able to find it now. google it around a bit.

    And I agree such big PSUs are not the best option currently. Of course for high-end gaming/computing it does make sense, but with midrange getting better and better each generation, we will soon have a hard time buying such power-hungry computers.

    I myself use an i5+gtx660 and run a lot of games. Most of the time I'm limited by v-sync, and not the hardware. I'm not a professional, just play for fun, so no reason to upgrade. My system is powered by a simple 350w unit from Akasa - I'm living on the edge here, but it works: no bluescreens nor shutdowns nor performance hit.
  • DanNeely - Friday, May 30, 2014 - link

    I'd like to see more small/mainstream PSU reviews too. The problem is that most hardware reviewed is whatever the OEMs are willing to provide; meaning there's a large bias towards halo devices over everything else.
  • Death666Angel - Sunday, June 1, 2014 - link

    Depends on wether or not people are interested in 120Hz gaming @ 1440p or even 60Hz @ 2160p. For that kind of stuff you need SLI/CF unless you - more or less drastically - reduce IQ.
  • E.Fyll - Sunday, June 1, 2014 - link

    True; most of our upcoming reviews will be of high output units. As mentioned, we are limited to what companies like to provide for testing and, for various reasons, every PR department likes to promote the best they have, even though it does not account for the majority of their revenue. This applies to virtually everything, from sewing needles to cars, not just PSUs. However, I have requested low output units from several manufacturers and some of them were positive, therefore we should be posting such reviews in the following months as well.
  • teyink - Saturday, May 31, 2014 - link

    Picked this up for $109.99 after rebate today.

Log in

Don't have an account? Sign up now