NZXT Phantom 820 Case Review: Everything, Everything
by Dustin Sklavos on October 15, 2012 1:35 AM EST- Posted in
- NZXT
- Cases/Cooling/PSUs
- ATX
- E-ATX
Testing Methodology
For testing Micro-ATX and full ATX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise.
ATX Test Configuration | |
CPU |
Intel Core i7-2700K (95W TDP, tested at stock speed and overclocked to 4.3GHz @ 1.38V) |
Motherboard | Gigabyte GA-Z68MX-UD2H-B3 |
Graphics Card |
ASUS GeForce GTX 560 Ti DCII TOP (tested at stock speed and overclocked to 1GHz/overvolted to 1.13V) |
Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
Accessories | Corsair Link |
CPU Cooler | Cooler Master Hyper 212 Evo with Cooler Master ThermalFusion 400 |
Power Supply | SilverStone Strider Plus 750W 80 Plus Silver |
Each case is tested in a stock configuration and an overclocked configuration that generates substantially more heat (and thus may produce more noise). The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running seven threads in Prime95 (in-place large FFTs) on the CPU and OC Scanner (maximum load) on the GPU. At the end of fiteen minutes, thermal and acoustic results are recorded. This is done for the stock settings and for the overclock, and if the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i7-2700K.
- Thank you to Gigabyte for providing us with the GA-Z68MX-UD2H-B3 motherboard.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Cooler Master for providing us with the Hyper 212 Evo heatsink and fan unit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply.
24 Comments
View All Comments
Urizane - Monday, October 15, 2012 - link
The issue wasn't with which side the cables are on. There are plenty of cases that slide drives in from the left and allow you to plug them in on the right. In fact, that's how I've seen all rails in ATX cases where the drives are mounted left to right (instead of front to back). Here, the cables are still facing the right side panel, but for some reason, the drives have to be inserted on that same side. I don't make a habit out of installing and removing drives on a regular basis, so it would make no difference to me. It's just different.infoilrator - Tuesday, October 16, 2012 - link
A clear objective found and delivered.The Phantom created a loyal group, the 810 and 410 showed groth and disernment.
This is over the top, but that can be ab apex as well as an excess.
Can't afford it, but I like where it comes from.
lol, someday someone will get all the details perfect, what will the reviewers do?
elitetechguy - Sunday, October 21, 2012 - link
Why don't you have the dimensions and weight? If the dimensions and weight didn't come with the documentation, why don't you have a scale and measuring device to get that information so you can write a complete review?sainikbiswas - Monday, April 24, 2017 - link
Hi, does this cabinet has support for SSI EEB Motherboard form factor. We are buying the Asus Z10PE-D8 WS so if anybody out here knows an answer to this, please let me know.