Discrete GPU Gaming Tests

4K Minimum with RTX 2080 Ti

By contrast to 1080p Max, our 4K Minimum testing aims at finding differences between CPUs at a playable resolution. There is still pixels to churn, but the 2080 Ti should at least be hitting 60 FPS in most games here.

A full list of results at various resolutions and settings can be found in our Benchmark Database.

(a-3) Chernobylite - 4K Low - Average FPS

No real change in Chernobylite.

(b-5) Civilization VI - 4K Min - Average FPS(b-6) Civilization VI - 4K Min - 95th Percentile

Civilization 6 gets a smaller increase in performance here than the 1080p Maximum test, but there's still a benefit over the previous generation. That being said, the AMD desktop CPUs with more cache pull ahead a lot here.

(c-5) Deus Ex MD - 4K Min - Average FPS(c-6) Deus Ex MD - 4K Min - 95th Percentile

Deus Ex seems to come to an asymptotic limit, and while the 4000G APUs were behind the curve, the 5000G APUs are solidly there.

(e-5) Final Fantasy 15 - 4K Standard - Average FPS

All CPUs pretty much hit a limit in FF15 above and Far Cry 5 below.

(i-5) Far Cry 5 - 4K Low - Average FPS(i-6) Far Cry 5 - 4K Low - 95th Percentile

(k-5) Grand Theft Auto V - 4K Low - Average FPS(k-6) Grand Theft Auto V - 4K Low - 95th Percentile

GTA 5 hits an odd glitchy mess around 180 FPS, and the new 5000G CPUs can push the RTX 2080 Ti in that direction a bit further - at this point it's probably best to start cranking up some detail to avoid it.

Discrete GPU Gaming Tests: 1080p Max with RTX 2080 Ti Integrated Graphics Tests: Finding 60 FPS
Comments Locked

135 Comments

View All Comments

  • Dribble - Friday, August 6, 2021 - link

    Might be because it isn't as power limited and hence won't throttle in the same way the AMD chip.
  • Danvelopment - Thursday, August 5, 2021 - link

    Is the 5600G 6 core or 8 core? The first page of the article says it's both on the two tables.
  • eastcoast_pete - Thursday, August 5, 2021 - link

    Now, imagine if those 5700 APUs would have kept the core numbers of the 3400, but clocked at current speeds. I hope that Intel will bring its 10 nm Desktop CPUs with the full Xe compliment of mobile Tiger Lake, as that might force AMD to up its game; well, the next APU generation will be RDNA2, so as long as AMD doesn't gimp it by keeping the GPU tiny, it should have significant uplift over Cézanne
  • Cooe - Friday, August 6, 2021 - link

    Far Cry 5 running at ≈25fps on average at "1080p Ultra" is actually CRAZY freaking impressive. Why? Because that means it should hit a solid >=30fps running at "1080p High", which basically means that this single chip APU solution is outperforming BOTH of the last generation console base models (aka PS4 & Xbox One/S) in this title!!! That's freaking NUTS!!!
  • nandnandnand - Tuesday, August 10, 2021 - link

    I wouldn't be surprised to see 1080p60 in the same scenarios with Rembrandt next year. But DDR5 will be expensive.
  • nanonan - Friday, August 6, 2021 - link

    Every other source I've read states the pcie configuration as 24 lanes divided into 16, 4 and 4 just like the 4000G series. Do you have a source for this 8+4+8 configuration?
  • linuxgeex - Friday, August 6, 2021 - link

    Anand wasn't perfect with proofing either but he was thorough on deep dives, exposing bottlenecks and explaining how and why it was relevant. These days Ian and co assume that if we're Anandtech readers we just trust their methodology and do some lip service by adding cut&paste boilerplate around specs and throw in an image sometimes from a past review, sometimes not directly relevant, and I get that they only have so much time to invest. It bores me, and it doesn't give the new people the same level of engagement that will built their future audience. Oh welles.
  • Samus - Friday, August 6, 2021 - link

    I blacked out after getting to the part where an entry-level AMD APU starts at $259.

    While I get yes there are the Athlon's, they are mostly outclassed by a 9th gen $90 Intel Core i3 so it isn't even worth consideration.
  • GeoffreyA - Saturday, August 7, 2021 - link

    Yes, pricing is disappointing.
  • mode_13h - Sunday, August 8, 2021 - link

    They're starting strong, because it's a lot easier to lower prices than raise them, and that pricing reflects the supply/demand situation, especially when the 3000-gen are still widely available.

    Over time, I'm sure you can expect to see the gap close, particularly since the process node is the same and die sizes are similar.

Log in

Don't have an account? Sign up now