The AMD B550 Motherboard Overview: ASUS, GIGABYTE, MSI, ASRock, and Others
by Dr. Ian Cutress & Gavin Bonshor on June 16, 2020 11:00 AM ESTASRock B550M Steel Legend
The smaller mATX version of the Steel Legend is, for the most part, similar to the larger version but with the same features in a smaller form factor. We still get the design that comes across as a stainless steel implementation, with RGB LEDs on the rear panel cover and chipset heatsink, but this time the chipset heatsink covers the main M.2 slot rather than the secondary one (and the secondary one doesn’t have a heatsink at all).
The CPU power is an 8-pin and a 4-pin, and the socket area has access to three 4-pin fan headers within easy reach. The DRAM slots are single sided latch designs, and on the right hand side of the board we get an RGB LED header, the 24-pin ATX connector, the USB 3.0 header, two vertical SATA ports, and four regular SATA ports. All the SATA ports in this configuration come from the chipset, with no additional controllers.
On the bottom of the board is another RGB LED header, three more fan headers, two USB 2.0 headers, and another USB 3.0 header. Above this is a PCIe 3.0 x2 slot without a heatsink.
The PCIe slots are configured for an x16 PCIe 4.0 from the CPU, and the other full-length slot is a PCIe 3.0 x4 from the chipset. On the right side of the board is the upgraded audio, which has signal separation, filter caps, and runs a Realtek ALC1200 codec without an additional amp.
On the rear panel of the motherboard, we get a Clear CMOS button, HDMI video output, Display Port, two USB 2.0 ports, a combination PS/2 port, a Type-A USB 3.2 Gen 2 port, a Type-C USB 3.2 Gen 2 port, four USB 3.2 Gen 1 ports, a Realtek RTL8125BG 2.5 gigabit Ethernet port, and audio jacks.
Facebook
Twitter
RSS
101 Comments
View All Comments
Ghan - Tuesday, June 16, 2020 - link
Right now, it seems more like B for Backordered. They may be priced a bit high, but the demand still seems to be there.yannigr2 - Tuesday, June 16, 2020 - link
This is a great article but it needs a follow up with a table for every motherboard explaining how they use the PCIe lanes in conjunction with M2 and SATA slots. It seems that motherboard makers are totally f up(sorry for the expression) the more reasonably priced models in that area.romrunning - Tuesday, June 16, 2020 - link
Does anyone know if the boards that have the Intel i225-V are shipping with the fixed hardware (v2)?R3MF - Tuesday, June 16, 2020 - link
+1mooninite - Tuesday, June 16, 2020 - link
Wow, another broken Intel NIC? I wish motherboards would stop using Intel NICs.mooninite - Tuesday, June 16, 2020 - link
After Googling it looks like v2 is not fixed either... a v3 is coming out. Time to buy Realtek.romrunning - Wednesday, June 17, 2020 - link
Which is hilarious - I remember when Realtek was the worst when it came to NICs, and Intel/3Com was the standard. :)WaltC - Wednesday, June 17, 2020 - link
Yes, indeed...;) My x570 Master has an Intel gigabit & a realtek 2.5gb. It's amusing because my interface is an EWAN that tops out at 1Gb, but I thought I'd try the realtek just to see and then I forgot about it...;)...Seems every bit as stable as the Intel--still on it, lol...;) Six of one, half-dozen of another.eastcoast_pete - Tuesday, June 16, 2020 - link
Thanks Ian and Gavin! One question, related to a likely use case for B550 mini ITX or mATX Boards: is it true that AMD will, at least initially, limit Ryzen 4000 APUs to OEMs? If that is so, I am definitely not interested in a B550 board in those form factors, and I don't think I am alone here. An answer is appreciated - thanks!mrvco - Tuesday, June 16, 2020 - link
I'm just here for the Next mini-ITX boards. I'm liking the Aorus Pro AX quite a bit.