MSI TRX40 Pro 10G & TRX40 Pro WIFI

Slightly down the pecking order and below the MSI Creator TRX40 are the MSI TRX40 Pro 10G and TRX40 Pro WIFI motherboards. Both with identical aesthetics and core feature sets, the differences between both models come down to networking support. Both motherboards come with dual Intel I211-AT Gigabit Ethernet controllers on the rear panel, but the TRX40 Pro 10G comes with an Aquantia AQC107 10 Gigabit Ethernet add-in card, while the TRX40 Pro WIFI includes an Intel AX200 Wi-Fi 6 wireless interface.

The design of the MSI TRX40 Pro 10G and TRX40 Pro WIFI follow the same black and grey design which stretches across the heatsinks and the PCB for a professional and uniformed look. The TRX40 chipset heatsink features active cooling, while just to the right hand of this is a two-digit LED debugger. Dotted around the edge of the PCB is six 4-pin headers with one designated for a CPU fan, one for a water pump, and four designed for chassis fans. The power delivery for both the MSI TRX40 Pro WIFI and TRX40 Pro 10G the CPU consists of a 12-phase design with 12 Intersil ISL99390 90 A power stages with 6 ISL6617 doublers and is controlled by an Intersil ISL69247 PWM controller. Providing power to the CPU is a pair of 8-pin 12 V ATX CPU power connectors.

Both models contain the exact same core feature set which includes four full-length PCIe 4.0 slots which run at x16/x8/x16+x8, with a single PCIe 4.0 x1 slot also included. There are two PCIe 4.0 x4 M.2 with heatsinks on the board itself, while an M.2 Xpander-Z Gen4 add-on card allows users to install up to two more PCIe 4.0 x4 M.2 drives into a full-length PCIe 4.0 slot. Also present is eight SATA ports which support RAID 0, 1, and 10 arrays. Memory support is exactly the same as the MSI Creator TRX40 with up to DDR4-4666 1DPC 1R, and up to DDR4-3866 2DPC 2R, with up to 256 GB supported across the eight memory slots. 


MSI TRX40 Pro WIFI rear panel (Pro 10G is exactly the same, minus the Intel AX200 Wi-Fi)

The only differences between both models are the rear panel; the Pro 10G has no Wi-Fi, while the Pro WIFI includes an Intel AX200 Wi-Fi 6 wireless interface which includes BT 5.0 connectivity. On the USB side is three USB 3.1 G2 Type-A, four USB 3.1 G1 Type-A, and one USB 3.2 G2 20 Gbps Type-C port. Both rear panels have two Intel I211-AT Gigabit Ethernet controllers, while the 3.5 mm audio jacks and S/PDIF optical output are powered by a Realtek ALC1220 HD audio codec; a secondary Realtek ALC4050H audio codec powers the 3.5 mm microphone input and the front panel audio. The MSI TRX40 Pro 10G comes with an Aquantia AQC107 Ethernet controller add-on

The MSI TRX40 Pro 10 GbE has an MSRP of $500., while the MSI TRX40 Pro WIFI has a cost $470. Both models do feature identical features aside from networking. The M.2 Xpander-Z Gen4 PCIe 4.0 x4 M.2 slot add-on card comes with both models and is a nice touch for users looking to add extra M.2 drives, at the expense of one of the full-length PCIe 4.0 slots. Both models are aimed at professionals with the design and feature set, but both models will appeal to gamers looking to build a system with the high-core count advantage of the Threadripper 3000 series, and on AMD's latest HEDT platform.

MSI Creator TRX40 Choosing The Right TRX40 Motherboard
Comments Locked

109 Comments

View All Comments

  • PopinFRESH007 - Sunday, December 29, 2019 - link

    PCIe is a serial point to point topology so each link or "lane" is independent (ignoring things like PCIe switches). This is different to the legacy PCI bus which is a shared parallel bus which would behave as you've described.
  • Dionysos1234 - Thursday, November 28, 2019 - link

    Any information on what memory is supported? ECC?
  • Llawehtdliub - Saturday, November 30, 2019 - link

    Yes ECC is supported
  • Vatharian - Thursday, November 28, 2019 - link

    Has anyone from ASUS actually thought even for a second about the PCI-Express slots placement? Using dual GPUs, until converted truly to single slot with water cooling, blocks most of the slots. In my case I'd need 4 or 5 slots, which leaves ROG Zenith II Extreme from their linup. And ASRock Creator. As much as I hate Gigabyte I must admit their Aorus line has sensible layouts, and MSI's are mixed bag.
  • nevcairiel - Thursday, November 28, 2019 - link

    These boards are clearly not designed for Dual GPU purposes, but instead actually offer quite some space for the primary GPU (3 slots is mandatory for many high-end air cooled cards these days), and additional slots for other 1 slot cards.
  • eek2121 - Friday, November 29, 2019 - link

    Nearly every board I looked at in the article has spacing for multiple GPUs.
  • eek2121 - Friday, November 29, 2019 - link

    I noticed you said 3 slots. I have a high end GPU, it takes 2 slots. The 3rd slot is extremely far away from the 2nd slot and could comfortably fit a GPU. Factor in the width of an m.2 drive when looking at the pictures above and you'll realize you are mistaken (many of the boards have m.2 slots in between, That is all the space you need for air cooling a GPU, since most high end hardware only takes up 2 slots, the 3rd 'slot' is actually where an M.2 drive would sit, and the real third slot is below it, leaving plenty of space for cooling fan air circulation).
  • Spunjji - Friday, November 29, 2019 - link

    Serious question - are dual-GPUs even used these days?

    I know they're out for gaming, but I don't know the state of play regarding GPU compute.
  • Bccc1 - Friday, November 29, 2019 - link

    For GPU rendering (e.g. Redshift, Octane and VRay Next) dual GPUs are quite common and even quad GPUs can be used quite efficiently.
  • eek2121 - Friday, November 29, 2019 - link

    I don't kow about the "blocking most of the slots" terminology. On my X399 board, only 1 slot is blocked (and technically you still could put a card in that slot, I actually had a low profile x4 card next to my GPU without any heat issues). On many X570 boards, spacing is such that no slots are blocked. In both cases, there are single slot GPUs, just not high end ones. As you've stated, using a custom loop allows for even high end GPUs to use only 1 slot.

Log in

Don't have an account? Sign up now