GIGABYTE X570 Gaming X

Currently at the bottom of GIGABYE's gaming-focused product stack is the X570 Gaming X. With a slightly lesser 10+2 power delivery when compared to the X570 Aorus Elite with a 12+2, the X570 Gaming X includes a cheaper Realtek ALC887 audio codec, a Realtek RTL8111H Gigabit NIC, and two PCIe 4.0 x4 M.2 slots. On the boards PCB itself is a very funky and unique black and grey theme with triangle shaped accents which extends over the PCB onto the heatsinks. The X570 chipset heatsink includes a cooling fan, while the board has four memory slots with support for DDR4-4000 memory with up to 128 GB.

On the lower half of the GIGABYTE X570 Gaming X is two full-length PCIe 4.0 slots which run at x16 and x16/x4. The top slot takes its lanes from the CPU, while the bottom full-length slot is locked at x4 from the X570 chipset, while there are also three PCIe 4.0 x1 slots; this means up to two-way AMD CrossFire multi-graphics card configurations can be used. For storage, the X570 Gaming X has two PCIe 4.0 x4 M.2 slots with the top slot coming with a heatsink, and a total of six SATA ports capable of support RAID 0, 1, and 10 arrays. The X570 Gaming X uses a 10+2 power delivery which is driven by an ISL69147 PWM controller running at 5+2 and uses a single 8-pin 12 V ATX CPU power input to delivery power to the processor.

On the rear panel is a relatively basic set of input and outputs with no USB 3.1 G2 connectivity to speak of. What actually is there in terms of USB support is four USB 3.1 G1 Type-A and two USB 2.0 ports. There is a separate pair of PS/2 inputs for legacy keyboard and mice. Finishing off the rear panel on the GIGABYTE X570 Gaming X is a single HDMI video output for users looking to run a compatible Ryzen APU, three 3.5 mm audio jacks that are driven by a Realtek ALC887 HD audio codec, and a Realtek RTL8111H Gigabit controlled Ethernet port.

The GIGABYTE X570 Gaming X is its gaming inspired, but surprisingly natural looking entry model onto the X570 chipset. With an MSRP of $169, it sits as one of the cheapest X570 models at the launch of the Ryzen 3000 processors, and with a wallet-friendly feature set with everything needed to make use of PCIe 4.0, it's a viable option for entry-level users. The only glaring issue is that there is no USB 3.1 G2 ports at all on the rear panel, and other models from other vendors at the same entry-level price point does include some.

GIGABYTE X570 I Aorus Pro WIFI MSI MEG X570 Godlike
Comments Locked

225 Comments

View All Comments

  • Mr Perfect - Tuesday, July 9, 2019 - link

    Yeah, I'm having flashbacks over here. Weedy little fans screaming along at 6000RPM, then choking up on a dust bunny or wearing out the bearing.

    Do we know what process they used for the X570? Is it the same 55nm they used for the X470? Here's hoping they shrink it a little for X670.
  • DigitalFreak - Tuesday, July 9, 2019 - link

    14nm
  • erotomania - Tuesday, July 9, 2019 - link

    55nm
  • DanNeely - Wednesday, July 10, 2019 - link

    no. X470 and below were 55nm (designed by ASMedia on an ancient process to keep everything cheap as dirt), X570 was done in house on 14nm. Ryzen 3's IO die is also 14nm (the much larger Epyc one was done at 12nm).
  • erotomania - Wednesday, July 10, 2019 - link

    Weedy, man! Those weedy fans
  • sing_electric - Wednesday, July 10, 2019 - link

    Given how little chipsets benefit from process shrinks, some part of me honestly wonders if there's any sense in going even further back to the future and dividing the chipset into a north/southbridge (or some other similar config) so that the heat can at least be spread out, getting rid of the need for a failure-prone mechanical part on your motherboard.
  • YoloPascual - Tuesday, July 9, 2019 - link

    z77 extreme 4 to x570 extreme 4 👊👊
  • The_Assimilator - Wednesday, July 10, 2019 - link

    I also owned a Z77 Extreme 4 at one time, and the X570 version is probably the closest to perfect that I've seen offered so far. If only it had a couple of extra USB ports on the back panel, it'd be a shoe-in.
  • rUmX - Tuesday, July 9, 2019 - link

    Hoping for price cuts on Intel cpus because no matter how good Ryzen is, these boards are way too expensive.
  • Karmena - Tuesday, July 9, 2019 - link

    Then get X470 or B450 boards. Or even X370 or B350 boards, you are in no way forced to use these latest mobos.

Log in

Don't have an account? Sign up now