MSI MEG X570 Unify

The MSI MEG X570 Unify combines sleek and uniformed all-black aesthetics without the swathes of RGB LEDs which some users find garish. With similar specifications to the MSI MEG X570 Ace which we reviewed at launch, the MEG X570 Unify takes a more direct approach with some very interesting features. Not only has MSI dropped all of the fancy plastic on the rear panel cover and removes the integrated RGB LEDs, but the power delivery heatsink is incorporated into the large aluminium rear panel cover to create a massive and robust cooling solution for power users; the X570 Unify is using a 14-phase power delivery design and two 8-pin 12 V ATX connectors for power. The Unify is more focused towards enthusiasts and represents MSI's higher-tier of X570 models. 

Looking at the core feature set, the MSI MEG X570 Unify includes three PCIe 4.0 x4 M.2 slots which each come with individual heatsinks for improved cooling performance when used with NVMe based drives. Also included four SATA ports and for the networking, included is a Realtek RTL8125 2.5 G NIC with an Intel AX200 Wi-Fi 6 802.11ax wireless interface. On the rear panel, there is a Realtek ALC1220 HD audio codec with three USB 3.1 G2 Type-A, one USB 3.1 G2 Type-C, two USB 3.1 G1 Type-A, and two USB 2.0 ports. Also present is a clear CMOS button, a Flash BIOS button, and a PS/2 combo port. There are three full-length PCIe 4.0 slots which operate at x16, x8/x8, and x8/x8/x4, as well as two PCIe 4.0 x1 slots. Supported memory speeds allow for DDR4-4600 and up to 128 GB to be installed.

Everything about this model screams enthusiast, but without all of the bells and whistles of the MEG X570 Ace. The MSI MEG X570 Unify even managed to push a Ryzen 9 3900X to 5857.01 MHz which is the current highest frequency for this processor on HWBot. That sends a very clear message that this model is suited for overclocking, but still provides users with the same premium desktop motherboard features as other competitive models in its product segment. At present, there is no pricing information available, but it's likely to cost around the same as the MSI MEG X570 Ace ($370).

MSI MEG X570 Ace MSI Prestige X570 Creation
POST A COMMENT

228 Comments

View All Comments

  • Marlin1975 - Tuesday, July 9, 2019 - link

    How soon before you can test the x570 boards? Really curious how pcie 3 m.2 cards perform in them with 2000 and 3000 series cpus. Does the new chipset help performance for 2000 cpus or even 3000 cpus compared to x470 and b450 boards?

    And any word on future mATX boards? Only 1 so far seems weird and also a monoply for asrock.
    Reply
  • DigitalFreak - Tuesday, July 9, 2019 - link

    I think the only advantage of using a 2000 series CPU with an X570 board will be PCIe 3.0/4.0 support. The X370/X470 only supported PCIe 2.0. In theory, the connection from the 2000 processor to the X570 chipset should run at PCIe 3.0 speeds. Reply
  • FreckledTrout - Tuesday, July 9, 2019 - link

    The x370 chipset and x470 both supported PCIe 3.0 with either a 1xxx or 2xxx Ryzen CPU. If you are not running a 3xxx CPU in the x570 board there isn't any major feature that should cause one to want to upgrade. Reply
  • DigitalFreak - Tuesday, July 9, 2019 - link

    @FreckledTrout - Yes and no. The interconnect between the CPU and the chipset is PCIe 3.0 on X370 / X470, but all the PCIe lanes that come off the chipset are 2.0. Running a 2000 series CPU in an X570 board would give you a PCIe 3.0 link between the CPU and the chipset, with either PCIe 3.0 or 4.0 lanes coming off the chipset (depends on if AMD drops everything to PCIe 3.0 with a 2000 series processor). Reply
  • extide - Tuesday, July 9, 2019 - link

    It looks like they still allow the chipset lanes to be 4.0. So you'd have 3.0 link to cpu, but 4.0 from chipset to devices. Reply
  • Targon - Thursday, July 11, 2019 - link

    Since you have at least one or two PCI Express slots that are connected to the CPU, not chipset, that almost becomes a non-issue. On my Asus ROG Crosshair VI Hero(X370), you have PCI Express 3.0 x16 for the first slot, or x8/x8. The third PCI Express x16 slot is a 2.0 I believe, which is still enough to get the job done for many devices. Even with the X570 board with a first or second generation Ryzen processor, the most you end up with is an extra 3.0 supporting slot. Note that many boards may have x16 slots, but they are x8 electrically, so you won't see the full bandwidth anyway in those slots. Reply
  • sorten - Tuesday, July 9, 2019 - link

    Thanks Gavin! This is a great resource and is exactly what I needed to help build my new system. Reply
  • willis936 - Tuesday, July 9, 2019 - link

    The return of the 40mm fan! Those are the most obnoxious components ever. No one has missed them in the past ten years. Reply
  • Kastriot - Tuesday, July 9, 2019 - link

    Buy Asrock aqua and problem solved. Reply
  • npz - Tuesday, July 9, 2019 - link

    Well, you do have one choice, the GIGABYTE X570 Aorus Xtreme is fanless.
    I doubt they are that loud as they were in the past though, as it's a variable speed fan now.
    Reply

Log in

Don't have an account? Sign up now