The AMD X570 Motherboard Overview: Over 35+ Motherboards Analyzed
by Gavin Bonshor on July 9, 2019 8:00 AM ESTASRock X570 Creator
The ASRock X570 Creator is geared towards content creators with a similar feature set to the flagship ASRock X570 Aqua, but without the focus on high-end aesthetics, and water cooling. The X570 Creator has a simplistic and elegant theme with silver heatsinks, with black contrast.
Its X570 heatsink is actively cooled, and incorporates an M.2 heatsink, with a standalone heatsink for the top slot; the top M.2 slot supports PCIe 4.0 x4 and SATA, while the bottom slot is geared for just PCIe 4.0 x4 drives. For SATA there are a total of eight ports. On the PCIe front, there are three full-length PCIe 4.0 slots which run at x16/x8/x8, and x8/x8/x4, as well as three PCIe 4.0 x1 slots.
For memory, the ASRock X570 Creator has four slots with support for up to DDR4-4666 which remains to be seen if it will be effective or not in terms of performance. The X570 Creator also sports a 14-phase power delivery which is consistent with ASRock's other high-end offerings and has 8-pin plus 4-pin i12 V ATX CPU power inputs for delivering power to the processor. The feature set of the ASRock X570 Creator is similar to its other premium X570 models, but the main difference is primarily in the aesthetic. A cleaner, more professional look, without as much flash and pizazz. This mode has two PCIe 4.0 x4 M.2 slots, with a total of eight SATA ports with support for RAID 0, 1, and 10 arrays. A debug LED is located just below the X570 chipset heatsink, and next to these is an onboard power and reset switch.
With the ASRock X570 Creator being one of its more higher-end models, it has two rear panel Thunderbolt 3 Type-C ports. with an Aquantia AQC107 10 G LAN port, an Intel Gigabit port, Intel's AX200 802.11ax Wi-Fi 6 interface, and two USB 3.1 G2 Type-A, as well as four rear-panel USB 3.1 G1 Type-A. It also has two DisplayPorts with an input, and output, as well as one HDMI video output.
The ASRock X570 Creator comes in with an MSRP of $500 which for a premium feature set and everything on offer, it's not a bad price. There are other boards which cost slightly less with similar feature sets, but the Aquantia AQC107 10 G NIC, support for NVIDIA two-way SLI, and dual Thunderbolt 3 Type-C ports on the rear panel all add cost to the board.
Facebook
Twitter
RSS
225 Comments
View All Comments
isthisavailable - Wednesday, July 10, 2019 - link
The industry needs to make up its mind when it comes to USB C. Laptops are launching with only USB C and meanwhile $700 motherboards only have 1 USB C port and 8+ "outdated" USB A'sThe_Assimilator - Wednesday, July 10, 2019 - link
It's almost like there's a huge amount of peripherals with USB-A connectors that people who use PCs expect to continue to work when they upgrade! Isn't backwards compatibility a funny feature?Meanwhile, the only peripherals that laptops generally use are docks, hubs, and storage devices - all of which have USB-C versions out the wazoo.
naris - Wednesday, July 10, 2019 - link
Why are memory speeds and channels show & discussed when talking about chipsets when the memory controllers are in the CPUs? Memory controllers have not been in chipsets for many years now!halfflat - Wednesday, July 10, 2019 - link
ECC support can be hard to verify for mere mortals; collating (or even better, verifiying) ECC capability on these motherboards would be an extremely useful addition to the article.ishkatar - Wednesday, July 10, 2019 - link
Does any of the boards support Raid 5? I only see 0, 1 and 10.Zibi - Wednesday, July 10, 2019 - link
You don't want to use RAID 5 without proper RAID Controller with cache.That means dedicated card.
Actually from performance / security perspective RAID 10 is pretty OK.
The_Assimilator - Wednesday, July 10, 2019 - link
AMD dropped RAID-5 support upon introduction of the AM4 socket (remember, chipset functionality like RAID is now a CPU function). I don't have an issue with that, since -5 is a very uncommon use-case in consumer workloads and if you want to do -5 right, you really want a hardware RAID card with a BBU.But -5 is pretty much dead anyway due to ever-increasing drive sizes - the rebuild time on anything over 1TB is horrendous, what you really want in such a scenario is RAID-6, and no consumer motherboard every has or will support that.
And please don't tell me you're using RAID-5 for data integrity, because invisible corruption is a thing that I have experienced personally. If you want *actual* data integrity, use Windows Storage Spaces or RAID-10, and as a last resort RAID-6.
Arbie - Wednesday, July 10, 2019 - link
There must be something you left out of this roundup. Whatever it was, please go back and put it in, and next time get it right. Thanks.Korguz - Wednesday, July 10, 2019 - link
huh ????Gastec - Wednesday, July 10, 2019 - link
That $700 must be an error right, perhaps of judgement?