Gaming: World of Tanks enCore

Albeit different to most of the other commonly played MMO or massively multiplayer online games, World of Tanks is set in the mid-20th century and allows players to take control of a range of military based armored vehicles. World of Tanks (WoT) is developed and published by Wargaming who are based in Belarus, with the game’s soundtrack being primarily composed by Belarusian composer Sergey Khmelevsky. The game offers multiple entry points including a free-to-play element as well as allowing players to pay a fee to open up more features. One of the most interesting things about this tank based MMO is that it achieved eSports status when it debuted at the World Cyber Games back in 2012.

World of Tanks enCore is a demo application for a new and unreleased graphics engine penned by the Wargaming development team. Over time the new core engine will implemented into the full game upgrading the games visuals with key elements such as improved water, flora, shadows, lighting as well as other objects such as buildings. The World of Tanks enCore demo app not only offers up insight into the impending game engine changes, but allows users to check system performance to see if the new engine run optimally on their system.

AnandTech CPU Gaming 2019 Game List
Game Genre Release Date API IGP Low Med High
World of Tanks enCore Driving / Action Feb
2018
DX11 768p
Minimum
1080p
Medium
1080p
Ultra
4K
Ultra

All of our benchmark results can also be found in our benchmark engine, Bench.

World of Tanks enCore IGP Low Medium High
Average FPS
95th Percentile

Being a game that’s not especially GPU limited – at least not at Low image quality settings – World of Tanks gives the 9900K some room to stretch its legs. The game isn’t especially sensitive to core counts, so it’s all about high per-thread performance. And in this case the 9900K with its 5.0GHz turbo speed pulls ahead. In fact I’m surprised by just how far ahead of the 8086K it is (16%); this may be one of the big payoffs from the 9900K being able to turbo to 5.0GHz on two cores, versus a single core on the 8086K.

The 9700K also puts up a strong showing in this situation, second only to the 9900K. We have a few theories on this – including whether the lack of hyper-threading plays a benefit – but it’s none the less notable that the new CFL-R CPUs are taking the top two spots.

The flip side however is that any CPU-based performance lead melts away with higher image quality settings. By the time we reach High quality, it’s purely GPU bottlenecked.

CPU Performance: Web and Legacy Tests Gaming: Final Fantasy XV
Comments Locked

274 Comments

View All Comments

  • DominionSeraph - Sunday, October 21, 2018 - link

    The 8700k is also pulling 150W while the 8086k is 95W. Something's not right there.
  • _mat - Wednesday, November 7, 2018 - link

    There can be two reasons why that is the case:

    1) The mainboard settings for Power Limits were different.
    2) The 8086K ran into Power Limit 1 while the 8700K was not.

    Whatever is the case here, it is no doubt that the 8086K did run into Power Limit 1 after the "Time Above PL1" (= power budget) was depleted. The 95 Watts are exactly the specified TDP of the CPU and Intel recommends this as Power Limit 1 value.

    So the problem here is that the Power Limits and Current Limits of the mainboard are not properly documented and seem to differ between the test candidates. While the 8086K obviously had Power Limits in place, the 9th gen CPUs were benched with no limits at all (only temperature limit at 100 °C on a core).

    Also, the whole page on power consumption needs rework. The TDP does matter depending on the board and its default settings.
  • ballsystemlord - Sunday, October 21, 2018 - link

    Ian! Many of your tests ( Y-Cruncher multithreaded, apptimer, FCAT - ROTR, WinRAR ), are taking too short of a time. You need some differentiation here! Please make them harder.
  • R0H1T - Sunday, October 21, 2018 - link

    >In case the previous comment was missed.

    I see that the last few pages have included a note about Z390 used because the Z370 board was over-volting the chip? Yet on the Overclocking page we see the Z370 listed with max CPU package power at 168 Watts? Could you list the (default) auto voltage applied by the Asrock Z370 & if appropriate update the charts on OCing page with the Z390 as well?
  • mapesdhs - Sunday, October 21, 2018 - link

    "Intel has promised that its 10nm manufacturing process will ramp through 2019, ..."

    Ian, what promises did Intel make 2 years ago about what they would be supplying now?
  • eastcoast_pete - Sunday, October 21, 2018 - link

    My guess is that Intel is now printing those promises in 10 nm font size (easily readable with a standard electron microscope). See, they moved to 10 nm by 2018!
  • ballsystemlord - Sunday, October 21, 2018 - link

    Actually, fonts are measured in points. So, it's 10pt, and it's rather legible.
    But, as for products, I don't see any either.
  • darkos - Sunday, October 21, 2018 - link

    nice review, but: please add a flight simulation such as x-plane and prepar3d or fsx. this is an area that is sadly, missing from your reviews.
  • kasboh - Monday, October 22, 2018 - link

    Do I see it correctly that there is little benefit of HyperThreading with 8 core CPUs?
  • eXterminuss - Monday, October 22, 2018 - link

    I am quiet shocked to see that Anandtech is using a vastly outdated and in parts plainly wrong description for World of tanks:
    1. The enCore engine ist being used in world of tanks for quiet a while now (10 month)
    2.World of tanks is a free to play game, no elements hiden behind a paywall, e. g. no more features for a paying customer than for a freelooter.
    3. Since the outadted EnCore benchmark was used, i would have at least expected to see the Results of that benchmark being posted aswell.
    Sincerly yours,
    eXterminuss a World of Tanks Player

Log in

Don't have an account? Sign up now