Though we don't typically cover adapter news, this one is worth a special exception. Late last month Club3D announced their DisplayPort 1.2 to HDMI 2.0 adapter, and since then there has been some confusion over just what their adapter actually supports - a problem brought on by earlier adapters on the market that essentially only supported a subset of the necessary HDMI 2.0 specification. As a result Club3D sent over a second note last week more explicitly calling out what their adapter can do, and that yes, it supports HDMI 2.0 with full 4:4:4 chroma subsampling.

But before we get too far ahead of ourselves, perhaps it's best we start with why these adapters are necessary in the first place. While 4K TVs are becoming increasingly prevalent and cheap, it's only in the last 18 months that the HDMI 2.0 standard has really hit the market, and with it the ability to drive enough bandwidth for full quality uncompressed 4K@60Hz operation. Somewhat frustrating from a PC perspective, PCs have been able to drive 4K displays for some time now, and the de facto PC-centric DisplayPort standard has offered the necessary bandwidth for a few years, since DisplayPort 1.2. However with DisplayPorts almost never appearing on TVs, there have been few good options to drive 4K TVs at both full quality and 60Hz.

An interim solution - and where some of Club3D's promotional headaches come from - has been to use slower HDMI 1.4 signaling to drive these displays, using Chroma Subsampling to reduce the amount of color information presented, and as a result reducing the bandwidth requirements to fit within HDMI 1.4's abilities. While chroma subsampling suffices in movies and television, as it has for decades, it degrades desktop environments significantly, and can render some techniques such as subpixel text rendering useless.

Meanwhile HDMI 2.0 support has been slow to reach PC video cards. NVIDIA offered it on the high-end the soonest with the Maxwell 2 family - though taking some time to trickle down to lower price HTPC-class video cards - while AMD missed out entirely as their initial plans for HDMI 2.0 were scratched alongside any planned 20nm GPUs. Thankfully PC video cards have supported DisplayPort 1.2 for quite some time, so DisplayPort to HDMI adapters were always an option.

However early DisplayPort 1.2 to HDMI 2.0 adapters were in reality using HDMI 1.4 signaling and chroma subsampling to support 4K@60Hz at reduced image quality. As the necessary controllers were not yet on the market this was making the best of a bad situation, but it was not helped by the fact that many of these adapters were labeled HDMI 2.0 without supporting HDMI 2.0's full bandwidth. So with the release of the first proper HDMI 2.0 adapters, this has led to some confusion.

And that brings us to Club3D's DisplayPort 1.2 to HDMI 2.0 adapter, the first such full HDMI 2.0 adapter to reach the market. Club3D's adapter should allow any DP 1.2 port to be turned into an HDMI 2.0 port with full support for 4K60p with full image quality 4:4:4 chroma subsampling. After the releases of pseudo-HDMI 2.0 adapters over the last several months, this is finally the real McCoy for HDMI 2.0 adapters.

The key here today is that unlike those early pseudo-2.0 adapters, Club3D's adapter finally enables full HDMI 2.0 support with video cards that don't support native HDMI 2.0. This includes AMD's entire lineup, pre-Maxwell 2 NVIDIA cards, and Intel-based systems with a DisplayPort but not an HDMI 2.0 LS-Pcon. In fact, AMD explicitly stated support for DP 1.2 to HDMI 2.0 dongles in their recent driver update, paving the way to using this adapter with their cards.

While we're covering the specifications, it also bears mentioning that Club3D's adapter also supports HDCP 2.2. Though as HDCP 2.2 is an end-to-end standard this means that the host video card still needs to support HDCP 2.2 to begin with, as Club3D's adapter simply operates as a repeater. As a result compatibility with 4K content on older cards will be hit and miss, as services like Netflix require HDCP 2.2 for their 4K content.

Finally, Club3D will be offering two versions of the adapter: a full size DisplayPort version that should work with most desktop video cards, and a Mini DisplayPort version for laptops and all other video cards. And with a roughly $30 asking price listed today it is an attractive option when it is otherwise unreasonable to replace a video card with one that provides HDMI 2.0 in its place.

POST A COMMENT

28 Comments

View All Comments

  • icrf - Tuesday, December 22, 2015 - link

    Both passive, too? Nice. I had a DP to DL-DVI that required a USB connection for power. It was the only way to drive my 2560x1600 display at the time. Reply
  • Kevin G - Tuesday, December 22, 2015 - link

    Technically these are active adapters but they do not require an external power source. Reply
  • DanNeely - Tuesday, December 22, 2015 - link

    Display port offers a modest (0.5A @ 3.3V) amount of power on the connector. It's what allowed active DP to VGA or DP to single link DVI adapters to not need a USB plug for additional power. Reply
  • Samus - Thursday, December 24, 2015 - link

    I love me some quality adapters. It's only a matter of time before Siig and CableMatters, etc, rip this design off and sell for half the price, so hopefully Club3D earns what they deserve in the short term. Reply
  • sircod - Tuesday, December 22, 2015 - link

    This is great. The only reason I went with Nvidia for my card was for HDMI 2.0 support. I bet AMD includes HDMI 2.0 on their next gen of cards, but either way I won't need to worry too much about it next time I upgrade. Reply
  • nathanddrews - Tuesday, December 22, 2015 - link

    Agreed, it is great. Not having HDMI 2.0 on Fury was a mistake that likely lost them quite a few sales - even if connecting a PC to a 4K TV is a niche. AMD officially announced two weeks ago that its next generation of cards would support HDMI 2.0a and DisplayPort 1.3. It is likely that NVIDIA will follow suit. It will be nice to have this era of display incompatibility behind us... at least until 8K displays come out. LOL Reply
  • DanNeely - Tuesday, December 22, 2015 - link

    We'll probably have the pleasure of going through it again sooner than that when DisplayPort v.next adds single cable 5k/120hz support. If HDMI adds support for 5k/60hz or 4k/120hz (without color down sampling) we'll have a pre-8k round of it with that standard too. Reply
  • nathanddrews - Tuesday, December 22, 2015 - link

    5K 120Hz will likely be possible with DP1.3 once the need arises thanks to DSC. Unlike chroma compression, DSC promises visually lossless compression up to 3:1, but only needing 2.5:1 for 8K 60Hz 10bpp. Reply
  • DanNeely - Tuesday, December 22, 2015 - link

    I'll believe it when I see it. "Virtually Lossless" means lossy; and while almost is probably good enough for video or most gameplay; text is an area where degradation from compression artifacts is most visible and half the point of high DPI is that it makes text really really sharp looking. Fuzzing it out with the equivalent of jpeg artifacts is totally not acceptable. Reply
  • wiak - Wednesday, December 23, 2015 - link

    yeah sounds like mp3 hehe, that was virtualy indiscernible compared to cds they said, or something like that Reply

Log in

Don't have an account? Sign up now