EVGA 790i FTW

by Rajinder Gill on November 5, 2008 9:00 AM EST

Crysis Benchmark

The Crysis graphics engine remains the standard by which all new games, 3D engines, and graphics cards are judged. Highly detailed environments present massive loads to the PCI-E lanes and saturate the MCH and memory banks with a flood of data. Any system weakness or instability is often uncovered within the first loop of the Assault Demo.

Crysis Benchmark - Harbor Demo - E8500 Processor

Crysis Benchmark - Harbor Demo - E8500 Processor

UT3 Benchmark

The highly addictive Unreal Tournament 3 remains a favorite lab game to unwind from the rigors of putting products through their paces. The UT3 engine is highly sensitive to memory access latency, often showing gains favoring a tighter performance level (tRD) setting over outright FSB speeds. A fun and frantic online playing experience demands smooth frame rates with no slowdown under load. We chose to run the Coret_Fly demo due to its back-to-back performance consistency between runs.

UT3 Benchmark - E8500 Processor

UT3 Benchmark - E8500 Processor

Once again the 790i FTW fails to dominate other boards when it comes to standard single GPU performance. However, it's unlikely that users will be purchasing this board for single graphics card systems. Therefore we decided to strap a couple of GTX 280s into the board to see what is on show when we max out the Crysis graphical settings in SLI to see if playable frame rates are acceptable at 1920X1200 for those who have the money to burn.

Crysis - GTX 280 SLI - E8500 CPU

4GHz with two GTX 280s in SLI will get you an average frame rate over 30fps, although you'll probably see some in game dips to around 15fps - still not what we'd call completely playable at maximum detail levels.

Standard Performance Results Overclocking results
Comments Locked

15 Comments

View All Comments

  • wongstein - Saturday, November 8, 2008 - link

    I don't know why AnandTech had so many problems OC'ing with this mobo. I put a Q9400 to 3.4 GHz at 4*425 with Patriot Extreme 1600MHz RAM running at 1700MHz, and it's rock solid. There's no FSB hole that I could find in all my experimentation. That's on air cooling (w/ cheap Coolermaster Hyper TX2) never going above 55 degrees in a normal room, even with all for CPU cores maxed at 100% with Prime95. I know that's not very extreme, but it runs rock solid and faster than a HP or Dell XEON Workstation costing two or three times as much. I could have pushed the RAM even further, and I would have if the computer was mine, but it's for a friend, and the performance benefit would not have been worth it.

    The extra money spent on this motherboard is well worth it. It's the foundation of your system. There's plenty of SATA and E-SATA ports, and very good, quality RAID onboard. All the features, build quality and even the accessories are all top notch. There's plenty of speed-controlled fan headers, unlike cheaper mobos where most of the fan headers are power-only, so you can make your machine as quiet as need be. That's worth the investment to me. All the slots and plugs are high quality - they feel solid, and the PCI slots have positive locks. The BIOS loads faster than my cheap MSI P35 NEO2, and the BIOS is much easier to use, and everything is available for configuration. Re-configuring after OC failures is also much quicker with this mobo, just 'cause you're back in the BIOS and out again with less waiting.

    Everything is just nicer with a top-notch board like this (or those from other brands), and it's a pleasure to use (and own).

    Cheers
  • ger32 - Friday, August 10, 2012 - link

    Wongstein,

    I own the same 790i SLI FTW motherboard you own. and I have one question for you: Is it a 64 bit motherboard? In other words, can I install Windows 7 64-bit OS with this motherboard ? I have an Intel Core 2 Quad Q9550s processor and the packaging does indicate 64-bit architecture. Your reply would be most appreciated. Thank you.

    /Jerry
  • Casper42 - Wednesday, November 5, 2008 - link

    nV RAID sucks butt, any changes there?

    I have a friend with a 680i and we put 5 x 640GB drives in his machine.
    Planned on creating a single large R5 Raid Group which would be approx 2.5TB. Then I wanted to carve this into 2 volumes. a 500GB boot/apps/games and a just barely less than 2TB storage volume.

    We chose 5 drives because I found an article that talked about how R5 performance on nVRaid sucks so badly UNLESS you use a 3 or 5 drive array and setup the RAID Stripe size the right way.

    Anyway, the nVRaid did not have a way to cut the single 2.5TB drive into 2 logicals to be presented to the OS.
    And since almost all PC mobos still use BIOS, you cannot see more than 2TB on a single volume if it will be part of the boot drive in the machine. So Windows XP and Vista both show only a 500GB drive visible (After 2TB it looped over and only showed what was >2TB)

    Had this been a Intel chipset, we would have had access to Matrix RAID and could have created a Striped OR R5 600/500 GB drive and then created a second Raid Group with a 2TB R5 volume and at the OS level they would have appeared to have been different drives. This would have allowed us to install on the 500 or 600 GB drive and then even if the other drive was > 2TB, I would have at least had the option in Windows to create the volume as a GPT Partition using Vista and it would still work.

    Stuff likes this make it clear that nVidia only seems to care about gamers and not Enthusiasts who also happen to game.

    I will be buying an X58 board myself because it will be the first board in a long time (excluding Skulltrail) that will have all the great Intel Chipset features AND support SLI.
  • daniyarm - Wednesday, November 5, 2008 - link

    Doesn't matter how good the motherboard is, I still can't believe some people would pay over $300 for MB. Price/performance goes exponential after $150 for MB and $250 CPU. Better to get cheaper MB and CPU and get another GPU.
  • kmmatney - Thursday, November 6, 2008 - link

    completely, totally, utterly agree. Heck, you can get a nice overlock with a $100 MB, and then get a MUCH better GPU.
  • Bozo Galora - Wednesday, November 5, 2008 - link

    Oh, its the PCP&P power supply!!!!
    No wonder I could find nothing - heh
  • cesthree - Wednesday, November 5, 2008 - link

    How is it that EVGA STILL finds it acceptable to release BETA BIOS releases on their products?

    This chipset is nearly a YEAR old!! It should be WTF, as in What The Flick is EVGA thinking?

    No product is free from issues. With the same CPU and RAM on a DFI UT LP X48-T3RS, I was finally able to ENJOY my equipment. One week to OC, been rock solid ever since. You'll notice DFI never actually marketed the 790i chipset, hmm I wonder why?

    No FSB holes, no data corruption at STOCK SPEEDS, no unexplainable SLI anomalies like graphic corruption or freeze-ups in games or while watching videos.

    EVGA is brave. They'll probably have to install new servers and hire another 100 techs to answer the 1000 pages of threads with the title "FREEZEING UP AT STOCK SPEEDS, HELPXOR M3!!!" or "WILL WE EVER GET AN ANSWER FROM YOU EVGA?"

    It'll be 6 months and EVGA will release a BIOS that should "smooth" everything out. Too bad the enthusiast world will already have forgotten about those shoddy Nvidia NB chipsets.

    I get sick even thinking about an X58 that get's infected by that Dinosaur of a chip NF200. Nvidia, stop being so proprietary and focus on just one thing, make your GPU's work, that's it, nothing else.
  • sabuus - Thursday, November 6, 2008 - link

    Dont worry, x58 will not need the NF200 chip, MB makes will just have to pay a licencing fee to enable SLI on thier boards :)
  • WT - Wednesday, November 5, 2008 - link

    LoL .. sounds like you've owned a few of those eVGA boards ?? Likewise. I'm on my second now, but my 750i FTW is bulletproof (knock on virtual wood).
  • cesthree - Wednesday, November 5, 2008 - link

    Upgrade build this year was in FEB 2008. Last build was an A64 system back in 2005.

    Bought EVGA 780i, 790i Ultra was released so I "stepped-up" to it and picked up some DDR3.

    Both boards were somewhat stable with Q6600 and 2x2GB OCZ REAPERS up to 3.2 to 3.4 GHZ, but I could never use the FSB that I wanted due to the HUGE FREAKIN HOLES both of those NB's have.

    Tried an E8400 on the 790i Ultra, meh.

    SLI'd at the same time with an EVGA 8800GTS 320MB. Again, neither board like SLI. Games were very buggy, although excellent WHEN they worked. LOTS of freezes and crashes.

    Stepped up from that 8800GTS to a 9800GTX. Single GPU with my X48-T3RS has been a dream come true for the last 5 months or so. That's all I wanted to upgrade to. Now I can hit 3.6 Ghz on air with the same Q6600, and 4.0Ghz on air with the E8400.

    DFI's BIOS really shines, and I don't have to crank the FSB above 1700 Mhz to OC either. I can if I want to, but I'd rather drop it down a bit for my day to day computing needs. I don't benchmark for a living with my rig, but it's nice to use CMOS reloaded if I feel like tweaking a bit.

    4 months of trouble on what was supposed to be my "New Build" with relatively new "Technology"

    I know EVGA has "excellent" tech support, but Nvidia needs to at least apologize for their equipment being so hit or miss.

    I couldn't see spending the same amount that I did on the board in RMA shipping costs, so I ditched the Nvidia NB chipset all together.

    Great policy by EVGA, but in my opinion, they couldn't GIVE me one of there boards, unless I could immediately eBay for the cold hard cash!

Log in

Don't have an account? Sign up now