Conclusion

There is absolutely no doubt that OCZ PC2-4200EB is the new performance leader in DDR2 memory. It is incredibly fast at 3-2-2-8 at the rated speed of DDR2-533 when the best of the competition is 3-3-3 and some is rated 4-4-4. It is good to see faster memory timings finally appear in DDR2. If you have any doubts that faster DDR2 timings really make a difference, just check out pages 5 and 6 where OCZ PC2-4200EB wins every benchmark compared to the top memory from our DDR2 roundup.

If that were all there is to PC2-4200EB, it would be enough to be impressed, but there is much, much more. This same modestly-rated DDR2-533 memory reached an incredible DDR2-821 in benchmark tests on our new DDR2 memory testbed. This is the highest speed that we have ever reached with DDR2, and even more remarkable is that it is achieved at the still fast timings of 4-2-3-8 at 2.1V memory voltage. Many competitors fall far short of this record, giving up with 5-5-5-10 timings.

The fastest 3-2-2-8 timings were good to about DDR2-633 speed, where we merely had to drop to 4-2-2-8 timings to go further. 4-2-2-8 carried us, with increasing voltage to about DDR2-730, where we needed to drop to the still fast 4-2-3-8, which reached all the way to our highest overclock of DDR2-821. Frankly, we might have gone even further by slowing timings even more, but we were already closer to our new test bed limit of DDR-864 than we ever believed we would be at this early juncture.

So, OCZ PC2-4200EB is fast at stock, and reaches the highest DDR2 speed that we have ever tested, at the fastest timings that we have even found with DDR2 at every benchmarked speed. Did we also mention that our test memory was 1GB DIMMs? While it is also available as single-sided 512MB DIMMs, there is little, if any, performance penalty with the double-sided 1GB DIMMs. Those looking for higher capacity DIMMs that won't require dismal timings have reason to rejoice.

It is rare that we get so excited about a product, but that excitement is deserved with OCZ PC2-4200EB. In every way that you look at it, this memory is the yardstick against which all future DDR2 memory will be measured. Yes, it is expensive, but it is also that good. We don't know all the parts that OCZ used in creating this incredible memory, but they need to buy up all the chips and corner PCB production before others find out their sourcing. OCZ PC2-4200 is the first memory to get us excited about an Intel board in a long time. Combined with one of the great new 925XE motherboards, this combo is capable of some very serious overclocking and the best performance that you will find in an Intel system.

1066FSB Performance: OCZ PC2-4200EB
Comments Locked

22 Comments

View All Comments

  • dev0lution - Thursday, December 23, 2004 - link

    1GB DC Kit for $400+ and 2GB DC Kit for $800+?? I think I'll just keep the hyper-x 4300 I got for $200 less and spend more on my other components. The performance increase isn't THAT mind-blowing but the prices sure are!
  • Lord Evermore - Thursday, December 23, 2004 - link

    Another sign of declining standards: the "Xenon" .13 technology?
  • GTMan - Thursday, December 23, 2004 - link

    The article makes the claim that other high end memory is achieved by "hand picking" and then says that this memory is a "new breed".

    Where is the info to back this up? What is different (in terms of technology) about this RAM? Or maybe this article is only about numbers :(
  • Carfax - Wednesday, December 22, 2004 - link

    The reason why the memory bandwidth scores are so low for DDR2-700 and 800 is obviously because the memory is bottlenecked by the FSB.

    The P4 would need to have a FSB of 1600 to take advantage of DDR2-800..
  • Alphafox78 - Wednesday, December 22, 2004 - link

    Funny thing is that at the 700mhz speed the memory bandwith on my A64 with PC3200 is faster...
  • Anemone - Tuesday, December 21, 2004 - link

    PS and I didn't even buy the matched 2gb set, just picked up 2 1gb individual sticks from Newegg.

    And at 4+ghz and sub 50c temps on air, I don't find any reason to worry about using an AMD solution...
  • Anemone - Tuesday, December 21, 2004 - link

    I own 2 1gb sticks of this memory and while I"ve not had occasion yet to reach 811 fsb, every other timing they tested I have managed on a P5AD2-E (925XE) board. My PS is only the Antec Neopower 480 so it can also be done with a lesser PS as well.

    Expensive, yes, but given that no way would you ever see DDR1 in 1gb sticks doing this, makes it quite worth it if you need 2gb of memory in 2 sticks.

    $.02
  • bupkus - Tuesday, December 21, 2004 - link

    Only one question...
    When will the time come that I can/should start considering DDR2 for my future AMD gaming PC?
  • PrinceGaz - Tuesday, December 21, 2004 - link

    I just wish there were 1GB PC3200 or faster modules available for not much more than twice the price of the 512MB ones. Instead it seems 1GB DDR modules will always be overpriced and with slow timings. The Athlon 64 is crying out for fast 1GB PC3200 modules.
  • MS - Tuesday, December 21, 2004 - link

    p.s. I know how to hand pick coffee beans but with memory, I would be out of my league...

Log in

Don't have an account? Sign up now