Back in January at the CES 2019 trade show, Cooler Master lifted the lid on its plans to release a new range 120 mm fans and they're here; the new Square Fan (SF) series SF120R RGB, the SF120R ARGB, and SF360R ARGB cooling fans. The SF120R RGB and SF120R ARGB are based on its new SF series square 120 mm design, while the uniquely designed triple 360 mm fan all-in-one framed does have support for both 360mm AIO CPU coolers and radiators.

Reinventing The Square

With one of the most intriguing fan designs of the year, the Cooler Master SF360R ARGB combines three 120 mm Square Fan designed fans into a single frame which can be mounted directly into a chassis, and most 360 mm AIO CPU coolers; this support extends to most varieties of 360 mm radiator too. The new SF series joins the MasterFan family and adds to the rapidly expanding Master series of products. The SF360R ARGB is compatible with PWM and can dynamically adjust speeds between 650 and 2000 RPM.

Supplied with the SF360R ARGB 360 mm frame is a small wired addressable RGB controller which allows users to customize the look of each of the three 120 mm fans individually. Interestingly the SF360R ARGB uses just two cables with one for connecting to an ARGB header, as well as a single cable designed to connect to a PWM enabled 4-pin fan header. Not only just this drop the required cable count from six to two, but it's also designed to aid in users cable management; less cables, less clutter.


The Cooler Master SF120R RGB and SF120R ARGB 120 mm Cooling Fans

Also launched alongside the cool looking SF360R ARGB 360 mm combined frame is the single SF120R ARGB cooling fan. There is also a variant without addressable RGB LEDs, the SF120R RGB. The SF120R ARGB also includes two cables with one for connecting to a 4-pin addressable RGB header and one for connecting it to a 4-pin fan header and supports PWM with variable speeds of 650 to 2000 RPM. With the SF120R RGB, it drops the addressable RGB LEDs for standard RGB LEDs and is suitable for boards with standard 3-pin headers.

All of the new Cooler Master Square Fan series fans benefit from rubber pads at each mounting point to reduce vibrations and thus improve the acoustic performance. Also included with the SF360R ARGB, the SF120R ARGB and SF120R RGB fans are lighting extension headers which carries a standard RGB signal, and allow users to daisy chain fans up without the need for an RGB splitter cable.

Cooler Master has informed us that the SF120R RGB, SF120R ARGB and SF360R ARGB are currently available for pre-sale at North American retailers such as Newegg and Amazon. The SF120R RGB is currently selling for $20 at Amazon, while the SF120R ARGB has an MSRP of $25. The triple fan SF360R ARGB has an MSRP of $60; we received this information directly from Cooler Master themselves.

Cooler Master has also informed us that it will be launching other variants, such as the SF240R ARGB, SF120P ARGB and SF240P ARGB models, over the coming months.

Gallery: CM Square

Related Reading:

POST A COMMENT

10 Comments

View All Comments

  • meacupla - Thursday, April 18, 2019 - link

    IDK about the triple fan frame.
    It doesn't offer much over having 3x single fans, yet has 3x the moving parts that can fail.
    Reply
  • WithoutWeakness - Thursday, April 18, 2019 - link

    It may simplify cabling a bit compared to three individual fans but I would be pretty upset if one fan had an issue and I then had to replace all three fans because they're part of one huge assembly. Reply
  • Qasar - Friday, April 19, 2019 - link

    meacupla how does this have 3x the moving parts VS 3 x 3 single fans ? Reply
  • Murloc - Friday, April 19, 2019 - link

    the single product that needs to be replaced has 3x the moving parts of a single fan.
    Of course you still have 3 fans if you buy 3 fans separately, but the probability of having to replace all 3 of them at the same time is very low.
    Reply
  • Sushisamurai - Friday, April 19, 2019 - link

    Just really nit-picking here. 3X the moving parts to fail is incorrect, as the number of parts remains the same. Sure you can argue Murloc that probability to replace all 3 is low which i'd agree, however, who says they needed to be replaced? Reply
  • npz - Thursday, April 18, 2019 - link

    The square fan is a definite improvement in terms of noise and vibration. I have experience with both the current thin circular frame CM design and the square design used on their new Hyper 212 Black cpu coolers, which these are for the 120mm. The thin circular frame design had weird vibration, rattling, resonance issues.

    I would recommend waiting for the SF120P model which appears to use the same Silencio pressure oriented fans as the non-RGB Hyper 212 Black model (except it's RGB here) rather than the air-balance model of the SF120R, which gets loud at higher rpms.
    Reply
  • JCChua - Sunday, April 21, 2019 - link

    I am really excited for their SF120M that were shown in their booth in the recent CES which is high performance-oriented Fan. I really miss the good old times or rather years of their Excalibur, Turbine Master and Jetflo Fans that were exceptional in terms of cooling performance/airflow for a 120mm Fan. But unfortunately, they are now sold out. Reply
  • JCChua - Sunday, April 21, 2019 - link

    I am really fed up with RGB Lighting all over the place. PC Hardware Releases are not exciting anymore. I want something innovative and unique for the next generation of products. I want a high performance-oriented Fan in order to keep Temperatures in check. Reply
  • Kepe - Saturday, April 27, 2019 - link

    Ever heard of Noctua? Reply
  • PeachNCream - Monday, April 22, 2019 - link

    I'm not sure about the marketing approach here. Cooling fans with square frames have been a thing for as long as cooling fans have been in computers. Why make that kind of branding attempt as a differentiator? Is RGB-everywhere running out of momentum? Reply

Log in

Don't have an account? Sign up now