Conclusion

Corsair's intent behind the creation of the AX1600i was to create a product that is technologically and qualitatively superior than anything else in the consumer's market, with little regard for its production cost and, ultimately, the retail price. It is the kind of product aiming to please just a select few who want to build top-tier gaming systems or workstations regardless of the monetary cost.

Technologically, the AX1600i undoubtedly is the most advanced PSU that is currently available to consumers. The Gallium Nitride (GaN) parts are smaller, lighter, and significantly more efficient than their classic silicon-based counterparts. Their use allowed Flextronics (and ultimately Corsair) to design a platform that combines better overall performance and higher output into a smaller chassis. The end result is a PSU that is no larger than most 800W designs and yet is capable of delivering twice that power output without flinching. GaN parts are greatly more expensive than their silicon-based counterparts but the final product's cost was partially offset by the reduction in size and cooling requirements, allowing Corsair to maintain the price of the AX1600i at relatively reasonable levels.

The overall performance of the AX1600i is incomparable to that of classic PSU designs. Even the top tier models from other known manufacturers would have a hard time competing with the AX1600i on a single performance aspect - let alone every aspect. The power quality is textbook, with barely any voltage ripple appearing on any of the lines and under any load, while the voltage regulation is practically ideal. The very high electrical efficiency of the platform not only minimizes energy waste but also allows the PSU to operate very quietly and maintain low internal temperatures even when heavily loaded. Its very high quality parts are almost completely unaffected by environmental factors, ensuring that the AX1600i will perform 100% even in harsh environments. Taken altogether this means that the AX1600i has no peer; simpy put, its performance is unparalleled.

Corsair's flagship combines the best possible overall performance with exceptional quality parts, fashioning the best consumer PSU that money can buy. However, the AX1600i's true enemy is itself. With a price tag of $500 and a power output of 1600 Watts, the PSU is both preposterously expensive compared to regular designs and has a power output that will be vastly oversized for almost every kind of user. Only a system with a very powerful CPU and at least four top-tier graphics cards will be able to reasonably load an AX1600i, and these systems are quickly becoming a relic as NVIDIA scale back on SLI & CrossFire support. Instead we'd be looking at edge cases such as heavily overclocked systems with a smaller number of video cards, or someone who needs a lot of Titan Vs for productivity purposes.

Still, Corsair's move to GaN components signifies a very important milestone, as it is very likely that we will be seeing them implemented in less powerful units in the near future. They will be especially useful in SFX designs, as they will be able to deliver a high power output very efficiently, allowing the creation of quiet SFX units for living room gaming systems.

Hot Test Results
POST A COMMENT

39 Comments

View All Comments

  • TelstarTOS - Wednesday, April 18, 2018 - link

    Now, please scale down this platform and gimme an 800W AXI with a pricetag of 300W and I'll buy it for my next system. Reply
  • SirPerro - Wednesday, April 18, 2018 - link

    Well that's exciting.

    Now build one of those for normal people.
    Reply
  • Ninjawithagun - Thursday, May 10, 2018 - link

    Um, define 'normal people' please? Reply
  • baka_toroi - Wednesday, April 18, 2018 - link

    Isn't this the perfect mining PSU? Reply
  • Ryan Smith - Wednesday, April 18, 2018 - link

    Too expensive. There's actually a passage I cut from the article that I'll go ahead and post here.

    "One could argue that the PSU might be appealing to cryptominers, but we find that to be unlikely. Cryptominers usually only care about having a reliable high output regardless of the power quality or noise, and thus prefer to source regular >2 kW designs that sell for a fraction of the AX1600i's price"
    Reply
  • zodiacfml - Wednesday, April 18, 2018 - link

    Correct. Server grade PSUs are being used for mining. There are Chinese branded PSUs with similar capacity and efficiency not far from the Corsair but just above $100.
    I just read somewhere that it is actually easier to make a more efficient PSU with high capacity, around 1KW and above.
    Reply
  • The_Assimilator - Wednesday, April 18, 2018 - link

    $100, you are smoking your socks. Unless you're willing to buy something that some random dude has spliced a bunch of PCIe connectors onto and only gives a 30-day warranty on. Reply
  • gavbon - Wednesday, April 18, 2018 - link

    I don't think I have spent less than $150 on a PSU in the last 5 years - Obviously price tag doesn't necessarily equate to quality, but you're more likely to buy quality at higher price points...as this review proves, this unit is TOP quality, but you're always going to pay big bucks for it Reply
  • AdrianB1 - Wednesday, April 18, 2018 - link

    You can buy a Corsair with 2 year warranty for $75 in my part of the world (Europe). Semi-modular, not 80 Plus Titanium rated, but still a very decent PSU. Same for Antec or other brands, you can find a decent Fortron much cheaper. Most computers you buy here have ~$25 PSU + case combo and they are covered by 2 year warranty that you can extend to 4 years and the reliability is surprisingly good. Building PSU's is no rocket science anymore. Reply
  • Spazilton - Wednesday, April 18, 2018 - link

    They are using stuff like this. https://www.ebay.com/itm/Supermicro-PWS-1K21P-1R-1... Reply

Log in

Don't have an account? Sign up now