Top Tier CPU Air Coolers Q3 2015: 9-Way Roundup Review
by E. Fylladitakis on July 6, 2015 8:00 AM ESTThe Raijintek Tisis
Raijintek is yet another new European company, founded in 2013. For a company this new, Raijintek is retailing a fair number of products, which are thirteen coolers, four cases and several fans, with the company now expanding to peripherals and PSUs. The Tisis is Raijintek's most recent and advanced CPU cooler, which was originally baptized "Nemesis" but it was renamed due to a naming collision with another company's similar product.
The Tisis is supplied in a reasonably sized cardboard box with strong black/red artwork on it, focused around a picture of the cooler itself. Inside the box everything is well packed and the cooler is protected inside a polyethylene foam shell. Despite the obviously very rough time our sample had during its shipping to us, everything inside the box was unscathed.
Raijintek kept the bundle to the minimum of things required. Aside from the hardware and thermal grease necessary for the mounting of the cooler and a long L-type Philips PH2 screwdriver, nothing else is provided. It is however noteworthy to mention that there are no wire clips for the fans as this is the only cooler in this roundup review that is using rubber mounts instead.
There are two 140 mm fans provided inside the package, both with a red frame and white blades. There is nothing prominent about the fans, with the exception of the partially jagged blades. The OEM is recognizable and is PelHong Technology, a Chinese manufacturer. Both fans are identical, have engines with sleeve bearings and a relatively low maximum speed of just 1.000 RPM.
The Raijintek Tisis is a very large asymmetric dual tower cooler, with the towers completely different from each other. The fins of the front tower are larger and both of their fan-facing sides are jagged, while the fins of the rear tower are smaller and their sides are completely straight. Furthermore, the fins of the front tower have folded sides, effectively forming a wind tunnel that prevents the air from exiting from the sides. Openings for the rubber mounts of the cooling fans can be clearly seen. This method is a little more convenient than wire clips but it also prevents the adjustment of the fan's height, removing the possibility to raise the front fan a little bit to increase the RAM modules clearance.
The copper base and heatpipes of the Tisis are nickel-plated and polished, especially the contact surface that has been machined down to a perfect mirror finish. Five thick 8 mm heatpipes go through the relatively small base of the Tisis and expand to both fin arrays. For the installation of the cooler, the middle fan needs to be removed, as there is no other way for the screwdriver to reach the base of the cooler.
Facebook
Twitter
RSS
135 Comments
View All Comments
jenesuispasbavard - Tuesday, July 7, 2015 - link
I've had great performance with the Spire Thermax Eclipse II for five years now, and for the last three years, even better performance when paired with two Corsair SP120's. It's still the highest rated heatsink on Frostytech; not sure why it isn't included here.jenesuispasbavard - Tuesday, July 7, 2015 - link
Edit: Maybe too old? Released in mid-2010 I think.Iketh - Tuesday, July 7, 2015 - link
did I miss the thermal medium? what paste is used? I've looked over the article twiceBeany2013 - Wednesday, July 8, 2015 - link
Whatever was supplied - it's a test of the product as supplied (for most of them) or as recommended by the manufacturer (as in the TR one, where they provided a suitable fan when requested, as the rest came with one).Thermal pastes are best tested on *one* cooled as a known quantity, really, which would be a separate test of it's own, I'd say.
Iketh - Tuesday, July 7, 2015 - link
also, EVGA's cpu ACX cooler should be in a cheaper roundupcreed3020 - Wednesday, July 8, 2015 - link
Thanks for the review! This is certainly your best review since joining AT, kudos to getting a good spread of products from around the world. There were a few in there that I hadn't heard of so it was great that the final results would be a surprise.The results were somewhat what I expected and nice to see where each of the companies's products sit. I have to say that not having the Cyrorig on the final recommendation is a bit sad as their products are simply bespoke. I don't have the R1 Ultimate but I do use their C1 in my SFF case on an overlocked Core i5 4690k and the temperature to noise performance is unbelievable, especially compared to some SFF coolers I've used in the past from other vendors.
Looking forward to more of these, perhaps a SFF cooler showdown could be next...?
JimmiG - Wednesday, July 8, 2015 - link
I went with the Phanteks PH-TC14PE back when I built my Haswell system back in 2013. It and my (de-lidded) 4770K are still holding up fine.All those coolers are really close though, especially at full fan speeds. We've probably hit the limit of air cooling with heatpipe technology at this point.
PPB - Thursday, July 9, 2015 - link
Why review the Macho Zero and not the True Spirit 140 Power or the IB-E Extreme? Those 2 are far a better match for the rest of the lineup that the one you reviewed from Thermalright.katinacooker - Saturday, July 11, 2015 - link
Cryorig stock is availble in the UK from Alternatehttps://www.alternate.co.uk/html/search.html?query...
I got my R1 Universal from there
DPOverLord - Saturday, July 11, 2015 - link
You can't do a real air cooling review without the Thermalright Silver Arrow, this review is lacking.