Final Words

While it was clear early on in our testing that the GeForce GTX 980 would be the new single-GPU champion, even after finishing testing of NVIDIA’s new flagship we weren’t sure what to expect out of the GTX 970. On the one hand NVIDIA had driven a very significant gap between the GTX 970 and the GTX 980 on theoretical performance – on paper the GTX 970 should be around 80% the performance of the GTX 980 – and on the other hand the GTX 980 was in practice some 16% faster than AMD’s flagship R9 290X. Immediately you can see the potential for even a slower GM204 card to be a threat to AMD, but it’s only an assumption until you have the data in hand.

It’s only fitting then that with the GTX 970 now up and running we find ourselves in a virtual tie between NVIDIA and AMD. Despite not even being NVIDIA’s flagship GM204 card, the GTX 970 is still fast enough to race the R9 290X to a dead heat – at 1440p the GTX 970 averages just 1% faster than the R9 290X. Only at 4K can AMD’s flagship pull ahead, and even then the situation becomes reversed entirely in NVIDIA’s favor at 1080p. As such the R9 290X still has a niche of its own, but considering the fact that GTX 970 is a $329 card I don’t seriously expect it to be used for 4K gaming, so the 1440p and 1080p comparisons are going to be the most appropriate comparisons here.

As is the case with AMD/NVIDIA ties in the past, this is an anything-but-equal sort of situation, but it strongly sells the idea of just how fast the GTX 970 is and just how dangerous it is to AMD. Ultimately what you are going to find is that the GTX 970 scores some big leads in some games only to fall well behind the R9 290X in others, and in other games still the two cards are tied through and through. In the end for pure performance neither card is superior, and in this case that’s a huge victory for NVIDIA.

With the GTX 970 NVIDIA only ties the R9 290X, but in the process they do so while consuming nearly 90W less power, generating far less noise, and most importantly delivering all of this at a two-thirds the cost. GTX 980 gave NVIDIA a well-earned lead over AMD, but it’s the one-two punch of GTX 980 and GTX 970 together that so solidly cement NVIDIA’s position as the top GPU manufacturer. It’s one thing for the $499 R9 290X to lose to NVIDIA’s $549 flagship, but to be outright tied by NVIDIA’s second tier card is a slap in the face that AMD won’t soon forget.

There’s not much more that can be said at this point other than that as of this moment the high-end performance landscape is entirely in NVIDIA’s favor. They have undercut AMD with better hardware at a lower price, leaving AMD in a very tenuous position. AMD would have to cut R9 290X’s priceby nearly $200 to be performance competitive, and even then they can’t come close to matching NVIDIA’s big edge in power consumption. To that end it’s a lot like the GTX 670 launch, but even in that case NVIDIA’s overall hardware and pricing advantage wasn’t quite as immense as it is today.

At anything over $300 there are only two single-GPU cards to consider: GTX 980 and GTX 970. Nothing else matters. For much of the last year NVIDIA has been more than performance competitive but not price competitive with AMD. So I am very happy to see NVIDIA finally reverse that trend and to do so in such a big way.

Moving on, in NVIDIA’s lineup the GTX 970 is a potent performer, but NVIDIA has left themselves a big enough gap that it doesn’t completely undercut their new flagship. GTX 980 remains 15% faster than GTX 970, and that’s no small difference. For $220 more GTX 980 is certainly not the value option, but then this is an NVIDIA flagship we’re talking about, and NVIDIA has always charged a premium there. Instead if you can’t afford the high price of the GTX 980 or simply don’t want to pay that premium, the GTX 970 is an excellent alternative. By pricing the card at $329 NVIDIA has done a great job of making a significant fraction of GM204’s performance available at a better price, and for this reason GTX 970 stands a very good chance of being the value champion for this generation.

Finally let’s talk about EVGA’s GeForce GTX 970 FTW ACX 2.0. EVGA has clearly put a lot of thought into their card and there is a good reason they remain one of NVIDIA’s closest partners. As the only GTX 970 we’ve looked at thus far we’re really only able to look at it on a pass-fail basis, but on that basis it’s a clear pass. The ACX 2.0 cooler is incredibly powerful when paired with the 145W GTX 970 (almost a bit too much) and EVGA continues to deliver some great features and software through items such as their triple BIOS capability and their software suite.

At the same time the FTW in particular is a solid value proposition, though how solid will depend on what you compare it to. Compared to GTX 980 it’s going to fall short by 7% or so despite the overclock, but in the process it essentially cuts the GTX 980’s lead in half. Given the $220 price difference between the reference GTX 970 and GTX 980, that $40 FTW premium is a great alternative. On the other hand this is in the end a factory overclocked card, and it’s entirely likely that most reference clocked GTX 970s could achieve similar clock speeds without paying the $40 premium. As is usually the case with factory overclocked cards, with the GTX 970 FTW you are paying for the peace of mind that comes from a sure thing and the support behind it, as opposed to playing the overclocking lottery.

With that said, I feel like EVGA does walk away from this launch with one vulnerability exposed, and that is the ACX 2.0 cooler. EVGA’s amazing cooling performance is undercut by their middle of the road noise performance, which although is still very good in light of GTX 970’s overall gaming performance, it is not as good as what we have seen other open air coolers do in the past. It’s by no means a deal breaker – especially given all of EVGA’s other advantages – but given the kind of quiet cooling possibilities that a 145W GPU should enable, EVGA is not exploiting it as well as they could.

And while this configuration isn’t going to be optimal for stock users, I don’t doubt for a second that EVGA’s overclocking community will have a field day with this one. With this much cooling headroom to work with the ACX 2.0 cooler is going hold up very well for users who want to overvolt on air.

Overclocking
Comments Locked

155 Comments

View All Comments

  • Ryan Smith - Friday, September 26, 2014 - link

    It will apparently be delivered via a vBIOS update, judging from what is being said on EVGA's forum.
  • justaviking - Saturday, September 27, 2014 - link

    Excellent. Thank you.
  • Gunbuster - Friday, September 26, 2014 - link

    Too bad it seems ACX 2.0 is a loud ass cooler, have used EVGA in the past but that moves it off my list.
  • Qwertilot - Friday, September 26, 2014 - link

    You'd think they should be able to get the fans to at the very least spin down a lot further than that at idle - there seems to be at least three 970 cards capable of running on purely passive cooling at idle now. (Asus, MSI and Palit.).
  • maximumGPU - Friday, September 26, 2014 - link

    Very tempting for us 670 owners!
    Although will look for models with quieter coolers. Seems silly to have a loud one with such a low TDP.
  • Dahak - Friday, September 26, 2014 - link

    Did I miss the information about the compatibility issues that was indicated in the 980 review? or is it going to be in another article?
  • JarredWalton - Friday, September 26, 2014 - link

    It was briefly discussed on page 3:
    http://www.anandtech.com/show/8568/the-geforce-gtx...

    Basically, it was mostly a problem with the ASRock motherboard Ryan uses for GPU testing.
  • sweeper765 - Friday, September 26, 2014 - link

    So EVGA put all this work into lowering fan power consumption but forgot about idle noise? I find this perplexing . And i believe they had this same problem with other older models as well.

    Also i don't like the idea of passive cooling. Running the card at 50C for a long time is not good for longevity. I had a passive Gigabyte card in the past that after a few years was showing colored pixels on the screen.

    Better to use a low rpm (<1000) for quiet operation. You're not going to hear the difference anyway because you have other components making some kind of noise in the case.
  • Tetracycloide - Friday, September 26, 2014 - link

    In fairness, idle noise is much easier, just a BIOS change. Load noise required hardware revisions.
  • The_Assimilator - Friday, September 26, 2014 - link

    Why use two 6-pin PCIe power connectors when a single 8-pin would do the job just fine? Would certainly cut down on the BOM, and of course cable clutter.

Log in

Don't have an account? Sign up now