Conclusions

I've been using the G2 as my daily since getting it, and have been really quite impressed with the device. LG's battery size is large, and the battery life tests back up the subjectively long longevity that I've noticed. Obviously the process improvements from 28nm HPM and power saving features in the G2 like GRAM/PSR make an improvement here. It seems like with Snapdragon 800 we may be ushering in a new generation of battery performance, despite the lack of a traditional process node shrink. It just goes to show you that there can be benefits other than more performance from using a high-end phone. The G2 is the first device we've seen with 28nm HPM silicon inside, which Qualcomm will be on for while. 

There are, of course, performance benefits to talk about as well. Qualcomm's Snapdragon 800 (MSM8974), delivers solid improvements relative to Snapdragon 600 (APQ8064T). Although in some tests the G2's performance isn't quite near the MDP/T we tested a while back, that's due in part to the thermal constraints of being in a phone and also the still not quite final software on the G2 that LG wanted to get to us quickly. 

LG took a bold risk by putting the volume and power buttons on the back of the G2, something I initially suspected would be awkward and cumbersome. However it actually makes a lot of sense and allows the G2 to further decrease the edge bezel thickness and prevent the device from getting too wide, which is what I find affects in-hand fatigue quite a lot. After a day or so the back buttons are basically second nature, and I've been using the volume down to launch camera shortcut quite a bit. I'd take a back mounted power button over a top mounted power button anytime after using the G2. 

The G2's large display doesn't really add to the overall dimensions of the device, thanks to its unique design decisions. The panel also seems to come reasonably well calibrated out of the box, generally equaling the color accuracy we've seen from the iPhone 5 and HTC One. I can't help but be happy that we're finally seeing color accuracy taken seriously by some Android vendors.

On the camera side, having another Android phone with OIS is an awesome bonus. I love that we're getting more devices now with OIS and better emphasis on camera, and the results out of the G2 with the combination of that feature and 13 MP CMOS look very impressive in all but challenging low light situations. There's definitely OIS performance differences between the players that have it now, and room for further tuning and improvement, but it's already a huge help especially in handheld video. Likewise, finally having 1080p60 on a flagship device is absolutely awesome, now if only YouTube and other sharing mediums would follow suit with 60 FPS support. 

Overall LG's G2 is surprisingly good. It's built on a great platform, with great battery life and includes a number of design decisions that show honest to goodness innovative thinking on LG's part. We'll wait to give our final recommendation on the G2 until we get an LTE version with final software, but if you're looking for an Android phone with a ~5" display this fall the G2 looks like it could be high on your list.

Camera
Comments Locked

120 Comments

View All Comments

  • neoraiden - Sunday, September 8, 2013 - link

    I was considering the qx100 but the price is out of my range as I don't take enough photographs to spend that much, am considering the qx10 though at that price point I wonder if a canon 240hs would suffice.
  • Arnulf - Saturday, September 7, 2013 - link

    "Gone are the days of 1.4V to hit near-2GHz frequencies it seems, instead 8974 will hit 2.3 GHz at around 1V"

    About fuggin time - my 2006 vintage 65 nm Core2 runs at 2.13 GHz at less than 1.1V. I was under the impression that smaller lithography process allows for lower voltages so they should have been well under 0.9V for 2 GHz by now.
  • Drumsticks - Saturday, September 7, 2013 - link

    You are comparing two different companies' completely different CPUs, ARM vs x86 too. My 4670k will do 4ghz stable on a volt. The nature of smartphone SoCs vs full CPUs is very different
  • madmilk - Saturday, September 7, 2013 - link

    Your Core 2 also consumes 10 watts idling, despite the use of high-k dielectrics that TSMC only recently started using. HP trades off leakage for high clock speeds and low voltages.
  • FwFred - Saturday, September 7, 2013 - link

    You are comparing a platform with 3 discrete chips instead of one, and way more high voltage IO interfaces. Try a modern x86 SoC: Haswell ULT, Bay Trail, or Clover trail for a more fair comparison for idle power.

    His point was top clock speed vs. voltage. A completely different topic.
  • Krysto - Sunday, September 8, 2013 - link

    From what I've read, it's becoming very hard to use the same litography process at smaller nodes, and they need to move to a new litography technology (ultraviolet litography, I think), but that's years away from being ready, too, and might not be until 14nm or even 10nm.
  • unipidity - Saturday, September 7, 2013 - link

    I would just like to comment that articles like this are one of the reasons Anandtech will continue to get my traffic long into the future. Brian's "mini-review" is head and shoulders above any "full" review I come across on most tech review sites. Anandtech is never ever first to print, at least on phones, but when it comes to properly informing my purchasing decisions, nothing comes else comes close. Keep up the good work.
  • Impulses - Saturday, September 7, 2013 - link

    +1000
  • UltraWide - Saturday, September 7, 2013 - link

    Why are the comparison devices different throughout the tests?
    This inconsistency makes it hard to compare the G2 to another device.
  • nerd1 - Saturday, September 7, 2013 - link

    Funny fact is the domestic version of G2 supports both microSD and switchable battery (albeit slight smaller). Obviously US customers are too tamed to apple devices and they won't need such features.

Log in

Don't have an account? Sign up now