Meet AMD's Berlin: Radeon + Steamroller

The current Opteron 4310 EE (2 modules, 4 cores at 2.2-3 GHz, 40W TDP) and Opteron 4376 HE (4 modules, 8 cores at 2.6-3.6 GHz, 65W TDP) are about the best AMD can deliver for low power servers that need more processing power. These will be replaced by AMD’s Berlin CPU, the first Opteron with the new Steamroller cores.

The Quadcore chip integrates a next generation Radeon core, PCI-e 2.0/3.0, LPC, USB 2.0/3.0 and Serial-ATA controller.

AMD says that using the graphics core for the heavy scalar floating point will get as easy as C++ programming and as a result, Berlin should make a few heads turn in the HPC world. It even looks like SSE-x will get less and less important over time in that market. Andrew Feldman told us that Berlin will offer at least two time much CPU processing performance as the Opteron X-series. Although the TDP will be higher, the performance per Watt will be quite a bit better.  Berlin will use the same 28 nm process technology as the Opteron x1150 and x2150. This chip will be available in the first half of 2014, and might experience some stiff competition from Haswell based Xeons.

Time for new server CPUs! Seattle: the Atom killer?
Comments Locked


View All Comments

  • JohanAnandtech - Tuesday, June 18, 2013 - link

    thx. fixed :-)
  • Denithor - Tuesday, June 18, 2013 - link

    "It is clear that the micro server market gets the lionshare of AMD’s attention."
    lion's share

    "While the Opteron-X, Opteron 6300 and “Berlin” CPU will all face stiff completion from the Intel alternatives."

    "but it looks like Intel will probably have the upperhand in most traditional server markets."
    upper hand

    Wow, did you guys not edit this piece before going live?
  • JohanAnandtech - Tuesday, June 18, 2013 - link

    To be honest, I wrongly assumed that I still had some time left, then discovered that the deadline was already a few hours ago and just hurried. So I humbly thank you for making this article more readable for our readers :-)
  • JDG1980 - Tuesday, June 18, 2013 - link

    I'm hoping we will see some relatively inexpensive Mini-ITX Kyoto boards. An Opteron-X paired with ECC RAM could make a good, reliable platform for a DIY firewall or low-end NAS.
  • iwod - Tuesday, June 18, 2013 - link

    I didn't known the 9W for X1150 was for 1Ghz Core. If so i guess Intel will have Zero competition for Atom Servers. Intel will want to get as much market shares between now to end of 2014 when ARM will have a low power server product. Seattle seems interesting, I wonder if it is possible to have 4x 16 Core Seattle in a server. Seems like a good candidate for Hosting environment.
  • SuperMecha - Tuesday, June 18, 2013 - link

    Remember that the X1150 has 4 cores vs the 2 for the Atom chip. It also has much better IPC and support for ECC and 32GB (DDR3-1600) of RAM vs only 8GB (DDR3-1333) for the S1260.
  • JDG1980 - Tuesday, June 18, 2013 - link

    The Centertron (S1200-series) Atoms already have ECC support. But the performance is still subpar, so AMD will have an advantage there. Also, as far as I have been able to determine, there is only one Centertron board available to DIYers (the Supermicro X9SBAA-F) and it's hard to find and quite pricey (>$250). If AMD could get Mini-ITX Kyoto boards out at the $150-$200 price point, this would be a quite attractive option for small servers.
  • iwod - Tuesday, June 18, 2013 - link

    So how would next Gen Intel Arch compared to Jaguar? Since Intel has ( I think ) Hyper Threading in their Next Gen as well, so a Dual Core isn't so far off from Quad Core, And it seems Intel can ups the Ghz a bit more then the X1150.

    I would love to see some comparison done.
  • milli - Tuesday, June 18, 2013 - link

    "Berlin will use the same 28 nm process technology as the Opteron x1150 and x2150"

    Jaguar is made at TSMC.
    Rumors for Steamroller derived processors point to production at Globalfoundries. Most go as far as claiming that it will be FD-SOI (see STMicroelectronics). That makes sense because 28nm bulk would be a step back compared to 32nm SOI. I don't think AMD is going to stop using SOI for their high-end CPU's anytime soon.
    Either way, be sure that they won't be using the same process technology (even though they're both 28nm) for these very different CPU's.
  • rocketbuddha - Thursday, June 20, 2013 - link

    AMD specifically said in the DEC 2012 WSA amendment with Global Foundries. It is in Page 6 of the 11 Page PDF titles

    Separately, AMD will move to standard 28nm process technology and significantly reduce reimbursements to GF for future research and development costs.

    We anticipate these savings will be approximately ~$20M per quarter during the next several years which also helps achieve our OPEX target of $450M by Q3 2013
    <end quote>

    Read again and again. The standard technology at 28nm is Bulk HKMG. not SOI.

    Even GF's powerpoint roadmap states that the 20nm as well as 14XM process will both be successors to 28nm Bulk HKMG will continue to be Bulk HKMG and bulk with FinFETs respectively. And the SOI line stops with 28nm FD-SOI (in collaboration with STM) and just a ambiguous dotted line for the future.

    With FDSOI we still do not know if GF has agreed to manufacture FDSOI parts in large volume. All we know is the license agreement between ST Micro and GF.

Log in

Don't have an account? Sign up now