Synology DS1812+ 8-bay SMB / SOHO NAS Review
by Ganesh T S on June 13, 2013 4:00 PM EST- Posted in
- NAS
- Storage
- Synology
- Enterprise
Multi-Client Performance - CIFS
We put the Synology DS1812+ through some IOMeter tests with a CIFS share being accessed from up to 25 VMs simultaneously. The following four graphs show the total available bandwidth and the average response time while being subject to different types of workloads through IOMeter. IOMeter also reports various other metrics of interest such as maximum response time, read and write IOPS, separate read and write bandwidth figures etc. Some of the random access benchmarks don't fit in the graphs below. The scales were not altered in order to make the comparison against other NAS units (which fit in the scale) easier. Readers interested in the actual values can refer to our evaluation metrics table available here.
Bandwidth and response times can be compared against NAS units from other vendors based on the same platform (Atom D2700). One thing to keep in mind when analyzing the results above is that the LaCie 5big Pro is a 5-bay unit and the Thecus N4800 is a 4-bay unit, while the DS1812+ is a 8-bay. Sequential performance doesn't seem to reach that of the competitors, but the DS1812+ is stellar in the real life tests / random accesses (again, it is necessary to remember that the units have different number of hard drives being accessed during the test).
Facebook
Twitter
RSS
93 Comments
View All Comments
ganeshts - Friday, June 14, 2013 - link
Yes, you can add the DX510 expansion chassis via the eSATA ports and get a total of (5 + 5) 10 more bays. That is why you have the 18 in the DS1812+ :)Peroxyde - Friday, June 14, 2013 - link
@name99 the USB/eSATA ports allow to make a backup of the NAS on external drives or may be dump content on your NAS. They are not to extend the capacity of your NAS.name99 - Friday, June 14, 2013 - link
OK. Thanks.Again to me seems a strange use case which can easily be duplicated just by uing one of the client machines, but I guess when you're selling something costing a $K you try to add in any random thing you can think of to make it appear worth the money.
don_k - Friday, June 14, 2013 - link
Your NFS numbers seem way too low compared to the CIFS numbers. Might want to drop the 'tcp' from the options, is the most likely culprit. NFS defaults to udp, not sure why you're changing that.ganeshts - Friday, June 14, 2013 - link
I see a number of vociferous comments about how a ZFS build / building your own NAS will offer better performance and how Synology (or, for that matter, any other vendor's off-the-shelf NAS offering) is just too costly. Let me try to address the issue:1. Building your own NAS with a configuration tuned to what you require will obviously be more cost effective and efficient - no doubts about that. Synology and other such solutions are targeted towards SMB / SOHO users who don't have the expertise to build a NAS on their own, or feel that their time is better spent buying a off-the-shelf ready-to-use offering from a vendor. Maybe the IT admin of the SMB has better things to do than sitting down and building a PC and installing the appropriate OS etc. These off-the-shelf NAS units are just plug and play.
2. Expandability: Units such as the DS1812+ offer the ability to extend the number of bays by providing support for extension units (DX510 has 5 bays and you can attach two of them to the unit). Plug them in and you have a total of 18-bays. Try adding that to your own build (first, you have to make sure the eSATA port you connect the new bays support port multipliers, then you have to spend a lot of time reconfiguring your host OS to recognize and add the new drives in the new bays to your existing array -- these are not impossible things, but just suck up a lot of time)
3. Features : NAS vendors offer 'app stores' to extend the feature set. For example, I am currently trying out Surveillance Station on the DS1812+ right now. Ready-to-use minutes after installing it. On your PC, you have to set up something like iSpy and spend time making sure it is compatible with all your equipment. Synology becomes a one-stop-shop for such features.
In summary, yes, if you are tech savvy and have a lot of time at your disposal, you are better off building your own NAS. There is plenty of open source software available to enable such systems (and to be fair, we are working towards evaluating a custom-built NAS for some time). We elect to do extended coverage of NAS units such as the DS1812+ and QNAP TS-EC1279U-RP because a large number of readers are IT admins / IT decision making people at many SMB / SOHO firms, and they are looking for off-the-shelf solutions. The off-the-shelf NAS market is pretty huge, and that is why you have a large number of vendors doing quite well with increasing revnue.. QNAP, Synology, Thecus, Netgear, Iomega / LenovoEMC, Asustor... The list is pretty big..
MadHelp - Friday, June 14, 2013 - link
Thank you for bringing some sense to this one sided thread. Building your own NAS can be done at a lower cost and offer you great benefits. However you will be hard pressed to build something more refined then this unit especially in regards to size and ease of use.bsd228 - Friday, June 14, 2013 - link
The simplest form - an HP Microserver + Freenas is pretty easy to assemble. Allows for ECC memory and up to 16gb of it too for higher performance. Still is a tiny form factor, low power, low noise. If expandability is the driver, large PC cases and motherboards with PCIX cards will always win. If features matter, a linux install offers faster development and many more.I combine them all together - Microserver with 16gb, an SSD for caching, solaris (full install) with virtualbox, Ubuntu in a VM. It's still a lightweight processor (I'd prefer one of the ULV ivy or haswells), but it kills an Atom.
Companies are flocking to this market because it offers nice margins...like the markup Puget might put on their beautiful systems.
MadHelp - Saturday, June 15, 2013 - link
The Microserver is a great build your own NAS box but it does not stand up to the DS1812+. For one you can only hold 5 3.5" disk max, while the Synology can hold eight and they are all hot swappable. How about warranty/support anyone?My opinion is based on owning both types of systems. I just sold my 1511+ + DX510 and I own a OI + Nappit ZFS array. They both have pros and cons. You can almost look at it like a person who's looking to buy a Mac verses a computer nerd who builds all of his boxes. There is a reason why Apple is in business and it's similar to why the Synology, QNAP's and Netgear's are able to sell NAS's.
bsd228 - Saturday, June 15, 2013 - link
Madhelp - the Microserver trivially takes 6 drives and has the PCIX slots to take more externally if you really wanted and needed the capacity. Or you could just buy two of them - with memory and a second NIC they're still only 400 each, compared to the $999 price of this unit bare. Either way, the DS1812+ can't stand up to the cpu, the features offered by zfs, the memory capacity, the overall feature set. And you can certainly get support for the software (not freenas, but WHS, or Nextenta or Solaris, others, and have the usual year warranty for the hardware.Synology and the others combine decent software, easy of use for a limited feature set, and barely good enough hardware into a package. IOW, one out of 3.
MadHelp - Sunday, June 16, 2013 - link
6 hot swappable drives? I don't think so. WHS is discontinued and all of those other Solaris based products you listed cost thousands of dollars to buy and support. You might get more CPU and the ability to add more ram to a Microserver box but whats the result? For a storage box it's still going to be slower then a DS1812+ in regards to throughput. In fact while the reviewer dismiss the new DS1813+ it now can deliver 350MB/s reads and 200MB/s writes to the network. I've never see anything close to that from a Microserver, point being its in another class. You guys might complain about the cost but you get what you pay for.