In Practice: Work

I've actually been using the Logitech G710+ keyboard and G600 mouse while writing up this review, and hammering out something detailed while having to check specs and so on gives both peripherals a good working over in productivity setting. I'm particularly familiar with the G600, which has been out longer and in my hands longer, and I've tried it in quite a few different environments.

For typing, I have to say that at least by my experience with the G710+, I'm not a fan of Cherry MX Brown switches. While I personally enjoy the feedback and clickiness of the MX Blues the best for typing, they really are inferior for gaming to all the other switches, so the MX Browns are at least an attempt to balance things. The problem is that the Browns feel like they have higher resistance than the Blues, Reds, or Blacks even though they're actually specced to have the least resistance. They may actually be bottoming out faster, but either way they put vastly more stress on my wrists than the other switches do. I'll have to see how the Rosewill keyboard I have in house with Cherry MX Brown switches plays out, but I can tell you the G710+'s feedback feels more like stiff membrane keys than the other mechanical keyboards I've used. This is all subjective, though; undoubtedly you'll be able to play with the G710+ in retail and feel for yourself.

Meanwhile, the G600 has a very smart design that felt incredibly intuitive in my hand. Feeling out the hot button array on the left side was easy enough to do (I preferred using the lower array instead of the upper), but fair warning: this is not a mouse for small hands. This mouse will probably be very comfortable to users who either like big mice or have big hands, but if you have small hands like I do, it's liable to stress your wrist and hands a bit more. I found my wrist cramping up after about a half hour of using the G600, but your mileage may vary.

In Practice: Play

I tried a few games with the G600 and G710+, but the one that got the most attention (and the one that's been dominating my attention span over the past couple of weeks) is the closed beta of MechWarrior Online. I could go on and on about how awesome the game is even in its current, somewhat buggy and slightly unbalanced state, but suffice to say pretty much everyone I know has made a concerted effort to get into it and either lucked out with a beta key from registering or actually bought into the closed beta with a Founder's Package, and griefing heavy mechs with my idiotic little Streak SRM Commando has been a delight.

The same resistance, size, and weight issues I experienced in day to day use with both peripherals unfortunately still apply in gaming, but the MX Brown switches used by the G710+ still remain superior to the Blues for games and certainly a valid option. I still think the Reds or Blacks are ultimately preferable in either productivity or gaming (I probably give a slight edge to the Reds), but the Browns are perfectly serviceable.

On the other hand, I think the G600 is an absolutely killer gaming option for users who are built to enjoy it. A friend of mine with larger hands found it incredibly comfortable and intuitive to use, and the ability to configure a DPI shift (similar to Corsair's sniper button) to the third surface button for precise aiming is incredibly useful. Likewise, as a MechWarrior Online afficionado I can't help but appreciate the potential of using the button array to control the various firing patterns.

In Practice: The Software Conclusion: Both Recommendable for the Right Users
Comments Locked

73 Comments

View All Comments

  • Impulses - Tuesday, October 9, 2012 - link

    Yeah, that's what I'm saying, the brown switches on my Rosewill RK-9000 just don't feel very different from my K90... If I sit there and poke the key slowly (or stab it repeatedly, i.e. gaming) then I'll be much more aware of the feedback... During fast typing I don't really notice it much though.

    I'm sure if I spent some time with it maybe I could get accustomed to feeling it out, but I'm not really alone in this, I've seen lots of people express the same sentiment over at the keyboard & mouse sub forum at Hardforums. Other people swear by their brown boards though, maybe they're more sensitive to the subtle feedback. It's a very subjective thing. Amazon has a good return policy if you don't have any local options and you wanna order different keyboards to try out.

    The Rosewill board I have should be fairly representative of other keyboards with browns too (perhaps unlike the Logitech in the review, the comments about dampening and pressure required make it sound weird), AFAIK they're actually Filco rebrands.
  • ol1bit - Tuesday, October 9, 2012 - link

    I like the rubber kind of key feedback. No clicky stuff for me. Never liked the old IBM keyboards. Modern/lite feel is for me.
  • 2kfire - Tuesday, July 7, 2015 - link

    Just thought I'd mention for others reading these posts, mechanical switches are actually quite "lite" compared to most membrane switches.

    I went from a standard Dell to a keyboard with blues. I had never noticed until I made the switch (pun intended), but with the Dell I had to mash the keys, whereas with the blues, I just need to softly, EVER so lightly tap them :)
  • Old_Fogie_Late_Bloomer - Tuesday, October 9, 2012 - link

    Thanks for responding. I've been a little reluctant to commit to a purchase and your input certainly isn't making me feel more confident. :-P I tend to hit the keyboard pretty hard; something tells me I'd plow right past the "tactile bump" without even noticing. Maybe I should just get a Unicomp for day-to-day typing and see how I feel about it for gaming. I mean, I can circle-strafe just fine with this worn-out old Dell, so...
  • Impulses - Tuesday, October 9, 2012 - link

    Do note that reds (and any Cherry key switch) will exhibit the same bottom out feedback tho, so if you tend to bottom out you'll still get that sharp clack that's signature of mechanical boards (those with plate mounted switches anyway)...

    What's missing (and less accentuated on browns) is that mid travel click that lets you know the switch has been depressed.

    If you get used to not bottoming out you get nothing, and technically that mid way click is there to let you know when you've pressed far enough... Some people get used to it even without that feedback, others never do and always bottom out. That's part of what makes switch types a personal choice.

    When gaming oost
  • Impulses - Tuesday, October 9, 2012 - link

    Blah, pressed post too soon...

    When gaming you'll invariably bottom out. Either way a Cherry switch still feels very different from a rubber dome. Some people don't seem to get that, all Cherry switches provide mostly even pressure all thru their travel. Rubber domes never give you that. Rubber domes always end in a mushy bottom and always require bottoming out.
  • MrSpadge - Tuesday, October 9, 2012 - link

    I do. In fact, I already have a "brownie" keyboard. Feels much better to me than blacks (couldn't lay my hands on reds yet, though).
  • karasaj - Tuesday, October 9, 2012 - link

    I like Browns and Blues a lot more actually for RTS games. I'm a fan.
  • Old_Fogie_Late_Bloomer - Tuesday, October 9, 2012 - link

    From everything I've read, I'm looking to get a brown keyboard, too...still rocking a crappy Dell I got free from my last job. At this price, though, I'd rather get a fully customized WASD with preinstalled O-rings. Maybe I can type on this a little in a Best Buy somewhere to get a better sense of the brown feel.
  • piroroadkill - Wednesday, October 10, 2012 - link

    Me, definitely. I paid a lot of money for a fully custom WASD with browns.

Log in

Don't have an account? Sign up now