BitFenix Prodigy Review: The Affordable Performable Mini-ITX

Testing Methodology

For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise. Again, note that while the GD07 can technically fit a full-size ATX motherboard, it's not tall enough to allow for our testbed's tower cooler. Because of the discrepancies that would make for in testing, plus the fact that media center cases are often mini-ITX designs, we have chosen to use our mini-ITX testbed rather than going with a specialized (e.g. not something you can compare directly to our other cases) ATX build.

Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.

We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.

Thank You!

Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.

• Thank you to Puget Systems for providing us with the Intel Core i3-2120.
• Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
• Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
• Thank you to Corsair for providing us with the Corsair Link kit.
• Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
• Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
• And thank you to SilverStone for providing us with the power supply and NT07-1156 heatsink/fan combo.