BitFenix Prodigy Review: The Affordable Performable Mini-ITX
by Dustin Sklavos on June 1, 2012 1:55 AM EST- Posted in
- Cases/Cooling/PSUs
- Mini ITX
- bitfenix
Testing Methodology
For testing Mini-ITX cases, we use the following standardized testbed in stock and overclocked configurations to get a feel for how well the case handles heat and noise. Again, note that while the GD07 can technically fit a full-size ATX motherboard, it's not tall enough to allow for our testbed's tower cooler. Because of the discrepancies that would make for in testing, plus the fact that media center cases are often mini-ITX designs, we have chosen to use our mini-ITX testbed rather than going with a specialized (e.g. not something you can compare directly to our other cases) ATX build.
| Mini-ITX Test Configuration | |
| CPU |
Intel Core i3-2120 (65W TDP) |
| Motherboard | Zotac Z68ITX-A-E |
| Graphics Card |
Intel HD 2000 IGP Zotac GeForce GTS 450 Eco (dedicated) ASUS GeForce GTX 560 Ti DCII TOP (dedicated extra) |
| Memory | 2x2GB Crucial Ballistix Smart Tracer DDR3-1600 |
| Drives |
Kingston SSDNow V+ 100 64GB SSD Samsung 5.25" BD-ROM/DVDRW Drive |
| Accessories | Corsair Link |
| CPU Cooler | SilverStone NT07-1156 with Cooler Master ThermalFusion 400 |
| Power Supply | SilverStone SFX ST45F 450W |
Each case is tested with just the Core i3's integrated graphics as well as with a discrete graphics card. The system is powered on and left idle for fifteen minutes, the thermal and acoustic results recorded, and then stressed by running four threads in Prime95 (in-place large FFTs) on the CPU, and OC Scanner (maximum load) is run when the dedicated GPU is installed. At the end of fiteen minutes, thermal and acoustic results are recorded. If the enclosure has a fan controller, these tests are repeated for each setting. Ambient temperature is also measured after the fifteen idle minutes but before the stress test and used to calculate the final reported results.
We try to maintain an ambient testing temperature of between 22C and 24C. Non-thermal test results aren't going to be directly comparable to the finest decimal point, but should be roughly comparable and give a broader idea of how the enclosure performs.
Thank You!
Before moving on, we'd like to thank the following vendors for providing us with the hardware used in our testbed.
- Thank you to Puget Systems for providing us with the Intel Core i3-2120.
- Thank you to Zotac for providing us with the Z68ITX-A-E motherboard and GeForce GTS 450 Eco.
- Thank you to Crucial for providing us with the Ballistix Smart Tracer memory.
- Thank you to Corsair for providing us with the Corsair Link kit.
- Thank you to Kingston for providing us with the SSDNow V+ 100 SSD.
- Thank you to CyberPower for providing us with the Samsung BD-ROM/DVD+/-RW drive.
- And thank you to SilverStone for providing us with the power supply and NT07-1156 heatsink/fan combo.
Facebook
Twitter
RSS
79 Comments
View All Comments
Zoomer - Saturday, June 9, 2012 - link
They got IPOedNorseman4 - Saturday, June 2, 2012 - link
Currently it's nowhere, even us.ncix.com as listing the case as "not yet available", but you can pre-order. (Shipping mid June. 79.99 w/ free shipping)Additionally, NewEgg looks like they will carry it, since they have placeholders (out-of-stock, Image coming soon, that sort of thing) for both the blank and the white case. (Currently showing 79.99 w/ 15.88 shipping)
Other retailers may also carry it since the BitFenix site shows 9 resellers, but does not include the 'Egg
JarredWalton - Sunday, June 3, 2012 - link
While Newegg does a ton of enthusiast business, I'd say BitFenix would be happier to get their stuff on Amazon first. *Everyone* has heard of Amazon; Newegg is big, but not quite that big.Zoomer - Saturday, June 9, 2012 - link
They could just do that themselves right now by shipping a bunch to amazon under the fulfilled by amazon program.oDii - Friday, June 1, 2012 - link
As someone who regrets building a WHS box in an fully populated Lian Li PC-Q08, this looks like they were so close to getting it right! Just needed one more 3.5" drive bay. To be honest, it looks like there's a decent amount of room between the drive bays, so I'm surprised they didn't just reduce that and increase the available bays...Dustin Sklavos - Friday, June 1, 2012 - link
You need more than five? Theoretically you can pop another one in the 5.25" bay, or alternatively, switch to 2.5" drives depending on your capacity needs.Streetwind - Friday, June 1, 2012 - link
There's actually a ton more drive bays in there than it looks like. If you wanted to go all out, you could mount, all at the same time:- Five 3.5" drives in the HDD cages
- One 2.5" drive in a mounting bracket below the bottom HDD cage
- Two 2.5" drives in mounting brackets between the bottom HDD cage and the power supply bay
- Two 2.5" drives in mounting brackets on the right side panel
- Four 2.5" drives in a (third party) 5.25-to-2.5 adapter in place of the optical drive
So yeah, while you can't do a RAID with six 3.5" drives, that's still a hell of a lot of storage for a mini-ITX case.
tjoynt - Friday, June 1, 2012 - link
Just curious: why do you regret using the Lian Li PC-Q08? Or do you regret using WHS? ;)oDii - Friday, June 1, 2012 - link
WHS V1 is fine for slow, slightly protected storage.My problem with the PC-Q08 is that once you start loading it up - lots of disks, standard ATX sized PSU (maybe slightly longer due to modular cables) - there just isn't enough room for everything. At the moment after the last time I took everything out of it, I put the HDD activity cable around the wrong way - and still haven't corrected because of how much of a pain opening it and accessing even small things in it is.
Perhaps to even slightly talk against my own argument of "needs more drive bays!"; the Q08 stacks the drives so close together that the cable between the SATA power connector leads becomes a major cable management problem - if it sticks out too much, you can't put the case back together. Similarly, you're pretty much forced to use 90 degrees rotated SATA data cables as standard cables would break the plastic supports of the drives they're attached to long before you managed to wrestle the side panel back on.
The positive thing about the Prodigy is that it seems like they've really got that general accessibility down with the rotated motherboard tray, as Dustin mentions on page 3.
I guess this case would be great for someone dabbling with ZFS - few disks, and a few locations for ZFS cache/ZIL.
sheltem - Friday, June 1, 2012 - link
Too bad the Lian Li Q25 was released afterwards. It's a bit taller, but not as wide, because it ditches the dvd drives and has 5 hot swap hard drive bays. The side panels comes off easier.