Samsung S23A750D Color Uniformity and Color Gamut

Most TN panels that I have seen seem to have uniformity issues around the panel, but this is also probably that TN panels are usually found in less expensive monitors that use less expensive backlighting systems. The Samsung isn’t an inexpensive monitor and has much better uniformity than most panels out there.

LCD Color Uniformity

Other than the bottom of the display, the Samsung is as uniform a monitor as I have seen so far, and maintains its low dE across most of the screen. Samsung has done a much better job with their TN panel and color uniformity than most vendors out there. That darker lower-right corner doesn’t seem to cause much of a color shift at least, as an uneven backlighting system often can.

Despite only being listed as covering the sRGB gamut, which would mean 71% of the Adobe RGB gamut, the Samsung measured out to cover almost 78% of the Adobe RGB gamut. Compared to a normal sRGB monitor, most of that extra range seems to be in the additional blue colors that are available. As one of the samples used to calculate the dE value that is blue is typically outside of the sRGB gamut, the extra gamut can bring the Samsung closer to being able to display this color, which helps the overall dE.

LCD Color Quality

Brightness and Contrast 3D and 120Hz Testing
Comments Locked

80 Comments

View All Comments

  • Sebec - Monday, December 19, 2011 - link

    "Not everything has to be written like a technical brief presentation or be a class on the electronics of how TN panels work."

    Maybe not, but on Anandtech, I'm come to expect that level of precision technical writing and explanation.
  • kris79 - Tuesday, December 20, 2011 - link

    Erm, makes me wonder if some of the nitpickers would complain about getting too much money in their EBT checks. Before complaining, one may want to remember that this info is, erm, Free! The writing is fine. Some of them may not use English as their first language. Some of the readers may not either. I, at least, like the chatty style more than the antiseptic, scientific style that more anal retentive types seem to like. I even like comments about power supplies. Naturally, I can understand that some would prefer to change all that to make the rest of us more like themselves. Erm, that is all I have to say...
  • ImSpartacus - Saturday, December 17, 2011 - link

    I have a problem with posters that use caps lock in a potentially rude manner.

    The tone of your post is already flirting with "rude". Using upper case characters nudges it over the edge. I cannot tolerate rude comments from individuals that represent Anandtech.

    I suggest not replying using language that could be interpreted as rude.

    To help achieve this goal, I suggest reading some of Anand's comments from past articles. He has an especially fantastic tone to every one of his comments.

    I hope Anandtech maintains its exemplary reputation of mature and thoughtful staff.

    Cheers!
  • Kristian Vättö - Sunday, December 18, 2011 - link

    I used caps because there is no bold (yes, this system is in need of an update). I wasn't trying to be rude, sorry if it sounded like that. I was just trying to get the message out in as short as possible. The poster didn't bother reading the article, so I couldn't be sure that he bothers reading my comment as a whole.
  • Kristian Vättö - Sunday, December 18, 2011 - link

    Also, thanks for the feedback. We (well, I in this case) can't really learn without someone else saying what is wrong. If someone bothers to comment about it, it must be something that actually has a value to someone.

    I'll be sure to pay more attention to my language in the future. Not that I post replies like the above often (first time I think)
  • Anand Lal Shimpi - Monday, December 19, 2011 - link

    "I hope Anandtech maintains its exemplary reputation of mature and thoughtful staff."

    We most definitely will :)

    Take care,
    Anand
  • Iketh - Sunday, December 18, 2011 - link

    I honestly did try to give examples. I spent a good 15 minutes trying to copy/paste a few sentences, but I can't change pages in the article without losing the post I'm writing. So then I started using print screen and erased my entire post that was in clipboard, so I said screw it.

    Here are some from "Lag and Power Usage".

    ", so the effect should feel like less." Like, for sure!

    "The power use of the Samsung was a bit higher than a normal LCD, though this could easily be due to the 120Hz refresh rate that uses more power." should be something along the lines of "Power consumption of the Samsung was a bit higher than a normal LCD, though this could easily be due to the 120Hz refresh rate."

    There are tons in the summary page from what little I saw of it.

    Hey thanks for calling out a 13-year account as a "hater."
  • Iketh - Sunday, December 18, 2011 - link

    This is what I saw in the introduction.

    "Virtually every game now is rendered in 3D, and so all of the information is there that is needed to show the game in 3D to the user..."

    "Virtually every game today is rendered in 3D and thus have all the information needed to be displayed in 3D..."

    I did not understand what was being said in the very next sentence. What is "running in active 3D"?
  • Kristian Vättö - Sunday, December 18, 2011 - link

    Sorry about the hater part, I would edit it out if we had that option. It just triggered me because it was the second comment and you clearly admitted that you only took a glance and still said it's bad. Okay, I know taking a glance has varying interpretations but from a writer's standpoint, your earlier comment was among the worst ones.

    The good thing is that you came back and did what you should have done in the first post: Provided some examples. That is how we can learn and also edit or explain ourselves if needed.

    For future use, you can open the article in another tab/window so you can keep posting the comment in one tab/window while reading the article in the other ;-)
  • lyeoh - Sunday, December 18, 2011 - link

    OK, here's my opinion: I don't really want to know about the writer's _off-topic_ difficulty in setting up an environment or rig to test the equipment, unless it's actually very interesting or amusing or written in an entertaining style (but that sort of thing should belong on a blog or a different section ala Byte's Chaos Manor or an entertainment-oriented publication/show e.g. Top Gear).

    Unfortunately the entire section on the lack of suitable PSU and display card and the resulting solution was not interesting, amusing nor entertaining. An editor would cut that section (and PSU gallery) entirely out. It just gives me the impression that the writer may be shilling for something/someone. Like those clumsy product placements in movies.

    The rest of the review is OK from a glance, assuming the measurements etc were correct and done correctly.

Log in

Don't have an account? Sign up now