Zotac Z68ITX-A-E Wifi Review - Mini-ITX meets Z68
by Ian Cutress on September 22, 2011 10:01 AM EST- Posted in
- Motherboards
- Mini ITX
- ZOTAC
- Z68
Test Setup
| Processor |
Intel Core i5-2500K 4 Cores, 4 Threads, 3.3 GHz (3.7 GHz Turbo) |
| Motherboards | Zotac Z68ITX-A-E |
| Cooling | Corsair H50-1 |
| Power Supply | Silverstone 1000W 80 PLUS Silver |
| Memory |
G.Skill RipjawsX DDR3-1866 9-10-9 28 4x4GB Kit 1.5V Patriot Viper Xtreme DDR3-2133 9-11-9 27 2x4 GB Kit 1.65V |
| Memory Settings | Auto |
| Video Cards |
XFX HD 5850 1GB ECS GTX 580 1536MB |
| Video Drivers |
Catalyst 10.12 NVIDIA Drivers 268.58 |
| Hard Drive | Micron RealSSD C300 256GB |
| Optical Drive | LG GH22NS50 |
| Case | Open Test Bed - CoolerMaster Lab V1.0 |
| Operating System | Windows 7 64-bit |
| SATA Testing | Micron RealSSD C300 256GB |
| USB 2/3 Testing | Patriot 64GB SuperSonic USB 3.0 |
Comparison to Other Reviews
Where applicable, the results in this review are directly compared to the following chipsets and boards which we have reviewed previously:
Power Consumption
The Zotac board does very well in low power scenarios, such as idling and in HD video playback mode, compared to the other Z68 boards we've tested. However some of that may stem from the fact that those boards were of a larger size.
CPU Temperatures
In comparison, the Zotac board is hotter than almost all the other boards we've tested. This was confirmation of my own experiences, whereby placing my hand near the cooler, I would feel the heat being generated.
Facebook
Twitter
RSS
29 Comments
View All Comments
DaveSimmons - Thursday, September 22, 2011 - link
SilentPCReview has covered the Silverstone and Lian-li cases for gaming builds, and CyberPowerPC will build you a SG07 system with a GTX 570 if you want one.But yes, some SFF gaming build tests from AT would be welcome as well.
My gaming system is usually just a single card and 2 x HDDs (or SSD + HDD for my next build) so most of even a micro-ATX case sits there empty taking up space.
TrackSmart - Sunday, September 25, 2011 - link
Thanks for the heads up about the articles. I'll check them out.LeftSide - Thursday, September 22, 2011 - link
Is there any way we could get some power numbers on a power supply that more closely resembles the power load these small HTPC motherboards will be using. I don't understand why you can't review these smaller boards with a good 80% 300 watt PS. Most of the people interested in these boards are interested in HTPC usage and idle load is the most important number. Your power numbers are typically useless, because of the low efficiency a 1000 watt PS will run a 50 watt load.The reviews on Anandtech are generally great and very informative, but I don't understand why you even test power consumption when the results are so skewed.
TrackSmart - Thursday, September 22, 2011 - link
As a fellow reader of these reviews, I understand that you can't have any consistency in the results unless you test under the same conditions every time. And that means having a powersupply that can handle any build.That being said, I agree that some tests with small form factor appropriate hardware would be of interest to folks... Not good for comparing performance differences between boards, but to see what you can do with a real build in terms of performance vs noise , heat, and actual power usage. Maybe they'll do an updated small form factor article. Their last guide was based around low power stuff (look it up), but a higher performance update to that guide would be cool.
IlllI - Friday, September 23, 2011 - link
this board got abysmal feedback over on hardforum.some guy had 19 of them die (1+18 replacements if i recall). his company decided to ditch the entire brand due to reliability.
moolman - Friday, September 23, 2011 - link
I didn't try this board but I tried two of the H67 boards. Both boards had defective displayports, they wouldn't work, everything else worked fine. Just beware, I posted and called Zotac for help and it seems they know of the problem but who uses display ports for integrated graphics, so I was probably the only guy complaining about it. But I have a 30" monitor so no choice in the matter. Luckily I bought from Fry's and hence able to try out 2 boards. Ended up with the Intel H56 ITX, glad I did, quieter and uses less energy. Thanks Zotac for sucking.lwatcdr - Friday, September 23, 2011 - link
I could see this as a one box server solution for a small business.Two nics so configure this as a fire wall.
WiFi= Wifi access point for the office "If it supports it."
Two SATA 6 ports Two big drives in a RAID.
Two SATA 3 ports boot drive/swap/
MSATA cache.
Install Asterisk for your phone system, vTiger CRM, an email server, what ever else you want or need.
USB ports Backup drives, printers, scanners.
You have the makings of an all in one small business server.
Shadowmaster625 - Friday, September 23, 2011 - link
Does that thing even have a specified efficiency at 50 watts? I dont think the 80 plus applies unless you are at 10% load.waldojim42 - Friday, September 23, 2011 - link
I see no reason to drop in a new bios just to compete with other manufacturers. If the others want to compete with Zotac, add in the "out of spec" options for people! I find it odd that it was more "fair" for you guys to kill off one channel of ram, than leave the thing to its higher clock rates.I am more interested in how well it handled running 4x over on all cores using stock cooling, than running a crippled machine.