AMD's Six-Core Phenom II X6 1090T & 1055T Reviewed
by Anand Lal Shimpi on April 27, 2010 12:26 AM EST- Posted in
- CPUs
- AMD
- Phenom II X6
WinRAR - Archive Creation
Our WinRAR test simply takes 300MB of files and compresses them into a single RAR archive using the application's default settings. We're not doing anything exotic here, just looking at the impact of CPU performance on creating an archive.
The i7 860 wins against the 1090T, but the lack of Hyper threading keeps the 750 behind the Phenom II X6 1055T.
168 Comments
View All Comments
mapesdhs - Tuesday, April 27, 2010 - link
Anand,
Thanks for the review! A good read overall, but a couple of niggles...
Why are there no i7 860 results in the results charts for 7-Zip, Batman, Dragon Age and Dawn
of War II? Likewise, why no 1055T data in the power consumption charts?
On the rendering tests page, you said this about the Cinebench test, where the 1090T does well:
"... if you've got a lot of CPU intensive threads there's no replacement for more cores."
But this is contradicted by the earlier comment for the 3dsmax test:
"Not all heavily threaded workloads will show the Phenom II X6 in a good light. Here Intel
maintains the advantage:"
Clearly, generalising here is unwise. For some reason, the Ph2 X6s lose out on the 3dsmax
test; but why? Lack of cache? Insufficient RAM bandwidth? Any ideas?
What kind of overclocking is possible with a good air cooler? Results with the stock cooler
are not really that interesting. I've bought a Thermalright U120E RevC to go with my 860.
Lastly, on the conclusions page, you say:
"Applications like video encoding and offline 3D rendering show the real strengths
of the Phenom II X6."
Not so, IMO. The i7 860 did better for the 3dsmax test (I'd really like to know why),
and although the 1090T was faster for the Cinebench multithreaded test, if you take
into account the higher power consumption of the 1090T, it offers a virtually identical
power/performance ratio under load. One of the reasons I chose an 860 system for
video encoding was because of concerns about power consumption; I had expected
the two extra cores in the 1090T would give a clear advantage in this respect, but it
doesn't (slower for the DivX test anyway, which is the encoding system I use, and a
worse power/performance ratio for the x264 2nd-pass test). In other words, where
the 1090T offers a speed edge, it's small (2 entire extra cores not really helping that
much at all), and its usefulness is negated by greater power consumption under load.
Hmm, can you confirm that all six cores in the 1090T were being used during the
DivX and 2nd-pass x264 tests? It just seems so odd to me that a 6-core chip isn't
doing better. I notice the scaling over the Ph2 X4 965 isn't that great here.
Btw, have you considered using V-ray as a render test? Studios using 3DSMax
often use V-ray as it scales to loads of cores AFAIK - I've been speccing out
32-core systems for a company in order to exploit this. Full details at vray.info.
Also, re pricing, the 1090T appears to be about 238 UKP in the UK (eg. scan.co.uk),
while the 860 is slightly less (234 from Scan), though after some shopping around I
was able to find the 860 for just 205. Clearly, if Intel is even remotely concerned about
the Ph2 X6, all they have to do is a minor price drop on Lynnfield to maintain a useful
price/performance edge.
Lastly, a word about BIOS support for these CPUs. Recently I've been scanning
eBay for AM2+/AM3 mbds, seeing what's available for a friend I'm helping out
with an upgrade; checking each board's specs, it's shocking just how many boards
have not received BIOS updates to support even the Phenom2 X4 and Athlon IIs,
never mind these new X6s. ASUS boards seem especially prone to this issue. So
watchout, always check the CPU support before buying. I'm still peeved that my
existing expensive M2N32 WS Pro can't use a Ph2 X4 (my gf's cheapo Asrock mbd
can). For this reason I went with an Asrock P55 Deluxe for my 860 build as Asrock
seem to be much more on the ball with BIOS updates.
If it were up to me, I would make it compulsory for vendors to include CPU support on
any board that has a theoretically compatible socket... :}
Ian.
PS. Perhaps a more concrete point to make is that the Ph2 x6s now definitely make the
i7 870 utterly pointless given its price (85% more expensive than the 860 for less than
5% higher clock).
Anand Lal Shimpi - Tuesday, April 27, 2010 - link
The 3dsmax test was an outlier if you look at the full set of results in Bench (www.anandtech.com/Bench). It could be a number of problems. Not all applications do well with core counts that aren't powers of 2 for starters. I don't believe we're memory bandwidth limited, but the 6MB L3 might have something to do with it.Like many benchmarks it's very difficult to keep 6 cores fully pegged. The x264 HD test ranges from 50 - 94% CPU utilization across all six cores on the Phenom II X6.
I haven't looked at vray as a benchmark, I'll do some digging :) And I agree completely on the issue of BIOS support. You should see how these things work behind the scenes, motherboard manufacturers are often still fixing BIOS issues on brand new boards even days before a launch like this.
Take care,
Anand
mapesdhs - Tuesday, April 27, 2010 - link
Anand writes:
> The 3dsmax test was an outlier if you look at the full set of results in Bench
Have you tried other render tests such as Maya Mentalray, or Alias Render?
Note that I have a render benchmark which is extremely cache-friendly and scales to
hundreds of threads, might be useful for ruling out the cache as an issue:
http://www.sgidepot.co.uk/c-ray.html
> applications do well with core counts that aren't powers of 2 for starters. ...
Beats me why this should be. Threads are just threads afterall. If it's not scaling well
because it's not a power of 2 then something somewhere has been badly coded
or designed, either the 3dsmax renderer itself, or the chip in some way, or the OS.
Hard to tell I suppose.
> Like many benchmarks it's very difficult to keep 6 cores fully pegged. The x264 HD
> test ranges from 50 - 94% CPU utilization across all six cores on the Phenom II X6.
This confirms my conclusion then, the X6 doesn't offer anything significantly useful
over the 860 in some cases, including DivX encoding. Where it's faster than the 860,
the difference is too small to be useful given the higher power consumption, and in
some cases even on multithreaded loads it's actually slower. I started reading the
article fully expecting the 860 to be trounced for the DivX test; that it was actually
slower was a bit of a shock.
> I haven't looked at vray as a benchmark, I'll do some digging :) ...
The systems I've been speccing out include the SGI Altix XE 340, BOXX 10400, SGI
Altix UV 10, Dell R810, Dell R910, SGI Origin400, SGI Octane III, etc. ie. all dual or
quad socket i7 XEON, 48GB RAM, that sort of thing.
> And I agree completely on the issue of BIOS support. You should see how these things
> work behind the scenes, motherboard manufacturers are often still fixing BIOS issues on
> brand new boards even days before a launch like this.
I dread to think...
I don't know how the vendors are allowed to get away with it. Such policies force people to
ditch their older motherboards even when in theory said board could use a modern CPU.
My ASUS board *should* be able to use the X6, but instead it's stuck at the useless Phenom1.
Asrock's approach couldn't be more different; that they would bother to add Ph2 X4 support
to a board as cheap,old and quirky as the AM2NF3-VSTA is remarkable (socket AM2 with
AGP), though I suspect they won't add X6 support for this board.
Ian.
Jamahl - Tuesday, April 27, 2010 - link
Please take a look at some of the other reviews around the web (like hexus, tomshardware) and ask yourself if you are using benchmarks that massively favour intel.Drazick - Tuesday, April 27, 2010 - link
Wouldn't you say that today most application are highly optimized towards Intel processors?Jamahl - Tuesday, April 27, 2010 - link
Yes I would however intel seem to have hit the jackpot on AT.Just look at the rest of the reviews to see how far out of whack Anand's is with the majority.
Anand Lal Shimpi - Tuesday, April 27, 2010 - link
I don't believe our full results are out of whack with what others have posted. Heavily threaded apps favor the Phenom II X6 (3D rendering, video encoding, 7z compression benchmark), lightly threaded or mixed workloads favor Lynnfield (gaming, everything else). It's more a question of what sort of balance do you strike between these applications. That's why I culled down the results for the actual review so we have a more balanced representation of all of the different potential scenarios.Take care,
Anand
Scali - Thursday, April 29, 2010 - link
What I noticed is that a lot of sites didn't include the i7 860, but only the considerably more expensive, but barely faster 870.I'm glad you used the 860, as it is pretty much in the 1090T's pricerange.
And as your tests show, most of the time the 860 comes out on top... while also having lower power consumption.
kwm - Tuesday, April 27, 2010 - link
I AM AN IT STUDENT AND USE A LOT OF VIRTUALIZATION IN LABS, VIRTUAL PC, HYPERVISOR AND SO FOURTH. WHAT I WOULD REALLY LIKE TO SEE IS A VIRTULIZATION COMPARRISION AND BENCHMARK. WE ARE MOVING SLOWLY IN THAT DIRECTION ANYWAY.LoneWolf15 - Tuesday, April 27, 2010 - link
You must have been gone on the first day of IT class when they explained that typing in allcaps is bad netiquette.