Virtualization & Consolidation

VMmark - which we discussed in great detail here - tries to measure typical consolidation workloads: a combination of a light mail server, database, fileserver, and website with a somewhat heavier java application. One VM is just sitting idle, representative of workloads that have to be online but which perform very little work (for example, a domain controller). In short, VMmark goes for the scenario where you want to consolidate lots and lots of smaller apps on one physical server.

VMWare VMmark
(*) preliminary benchmark data

Cisco has produced the first VMmark score for the Xeon X5600 series. The Cisco server with two X5680s at 3.3GHz achieved an impressive 35.83 score with 26 VMmark tiles. Twenty-six tiles, that is good for 156 VMs! Based on this number we can estimate where the Xeon X5670 will land. The 6174 numbers are based on AMD’s own preliminary data. 

VMmark is a clear victory for the Intel CPUs. Contrary to the SAP market, AMD can play the pricing card here. As long as you do not require dynamic resource scheduling, the software licences costs are nowhere like those of typical ERP projects. So the pricing of the hardware matters more. Also, contrary to other applications, there is no bonus for single threaded performance. The usage models of Databases, 3D Animation software and other all include scenarios where a number of cores will be idling while the others are working very hard. In a virtualization scenario where you are running tons of VMs, single threaded performance does not matter. So while Intel is clearly winning here, servers based on the newest Opteron might still be on the shortlist of those looking for good performance per dollar.

Decision Support benchmark: Nieuws.be vApus Mark I: Performance-Critical applications Virtualized
Comments Locked

58 Comments

View All Comments

  • kokotko - Saturday, April 24, 2010 - link

    why you are NOT SHARIG same "shareable" components - like PSU ??????

    NO WONDER THE NUMBERS ARE WORSE ! ! !
  • blurian589 - Tuesday, May 11, 2010 - link

    3ds max crashes because of the mental ray renderer. remove the plugin from loading and max will start up. its due to mental ray cannot see more than 16 threads (physical or virtual via hyper-threading). please do test the max rendering performance. thanks
  • Desired_Username - Tuesday, June 29, 2010 - link

    In the final words it states "We estimate that the new Opteron 6174 is about 20% slower than the Xeon 5670 in virtualized servers with very high VM counts. " But in the virtualization section I can't seem to figure out what brought you to that conclusion. The VMmark scores for the Cisco X5680 system was 35.83@26 tiles. You have the VMmark for the 6176SE at 31 which is dead on to the HP DL385 G7 which got 30.96@22 tiles. I see the X5680 15% better at best. And the Cisco x5680 system had 192GB of memory to the HP 6176SE system had 128GB. What am I missing here?
  • jeffjeff - Wednesday, September 22, 2010 - link

    I appreciate AMD's lower CPU cost but on the other hand, Oracle will license me their RDBMS per core and whether it's an Intel 56xx or AMD 61xx, I am still paying a relation of .5 license per core.

    So in the end, I would pay 6 cores for AMD and 3 cores for Intel. The price per core is much higher than the hardware price difference.

    Any thought or solutions on this issue would be appreciated...

    Joffrey
  • stealthy - Wednesday, November 24, 2010 - link

    Would it be possible to get the xml parameter files you have used in this test ?
    We are currently in a trial phase at my company to see how the current crop of intel boxes (dual Xeon X5460 procs) hold up against a new z10 system.
    Did you run the swingbench on the server itself or did you use a dedicated client to test ?
  • Big_Mr_Mac - Thursday, December 16, 2010 - link

    In 1991 I had an AMD 386-40 that kicked the snot out of Intel pride and joy 486DX2-66. Benchmarks were 25%+ across the board over Intel. Then Intel lied to the market and started passing off cull processors as viable options calling the 25Mhz and 50Mhz processors, when they were actually processors that failed the benchmarks for 33Mhz and 66Mhz respectively.

    In 1998 When Win98 Beta was released I was building Servers and workstations at a Tech-company and Again the AMD was kicking the snot out of Intel. Load times on new system builds, boot time and performance. The Intel chips could not hack it. Then when MS release their actual market version of Win98...all of a sudden you could not even use an AMD processor to run it. You had to wait 2 weeks for MS come up with a "AMD Patch" to run on an AMD system.

    One think I have seen over 20 years in the industry is that Intel will, Lie, Cheat, Steal and Bribe to try and get the upper hand on AMD. Always have....Always Will!!
  • rautamiekka - Saturday, December 25, 2010 - link

    Why the fuck are you testing with WinServer and M$ SQL ? Just reading this makes my blood boil 9 times in a second.
  • polbel - Saturday, May 21, 2011 - link

    i've been an amd fan for as long as i can remember. started fixing computers in 1979. used to fix mai basic four minis in the mid-80s that were built on amd bit-slice bipolar cpus on boards that cost 15,000$.

    just got 2 opteron 6172 cpus from ebay for what i thought was peanuts (450 $ each) only to discover upon delivery that both had hairline cracks at a 45 degree angle on one corner of the contact pad surface. looking at their web site i could figure i was out on limb and they would laugh in my face if asked for warranty support on these not-boxed cpus. i know some dumb ass managed to break those cpu corners, and tried to shove the crap to an ebay sucker, but the problem lies deeper, mostly in the g34 socket physical design itself of these otherwise beautiful electronic products. the edge of the metal cover doesn't reach the edge of the fiber board, leaving some unsupported area to be broken by dumb asses mimicking the old days when they could put a 40-pin dip cpu upside-down in its socket. so i'm freshly reviewing my belief system about amd while i figure a solution for this crap-hits-the-fan situation. wish i could have told amd engineers to cover theses last millimeters at the bleeding edge. they might say this and that about warranty, i still hold them responsible for this preventable disaster.

    paul :-)

Log in

Don't have an account? Sign up now