Carrell Loses His Baby: Say Goodbye to Sideport

Sitting at dinner with Eric Demers and Carrell Killebrew is honestly one of the best experiences I’ve ever had working with ATI. Before he got huge and subsequently left, I used to have annual dinners with Pat Gelsinger at Intel. They were amazing. To get to sit at the same table as someone as talented and passionate as a Gelsinger, Demers or Killebrew is one of the most fortunate and cherished parts of my job.

Eric was telling me about how they trimmed down 870 from over 400mm2 down to 334mm2 and how wonderful the end product was. I stopped him and asked for more detail here. I wanted an example of a feature that they had to throw out but they really wanted to keep in. Manufacturers rarely tell you what they threw out, marketing likes to focus on what’s in the chip and make everything sound like a well calculated move. Thankfully, marketing wasn’t allowed to speak at my dinner.

Eric turned to Carrell and said: “i know one feature we could talk about.”

“Sideport”.

Carrell responded, “OH MY GOD, that’s totally not fair.” (note that Carrell does not sound like a teenage girl, imagine that phrase just spoken more engineer-y).

When ATI first talked about the Radeon HD 4870 X2 they told us about a feature called Sideport. It was a port off each RV770 GPU that could be used for GPU-to-GPU communication.


Sideport as it was intended to be used

The whole point of doing CrossFire in alternate frame rendering mode (AFR) is that the chips never have to talk. The minute you have to start synchronizing them, you kill performance. Sideport was supposed to alleviate that.

Unfortunately, due to power reasons, Sideport was never used on the 4870 X2. ATI’s reference design had it disabled and all vendors followed suit.

Sideport was Carrell Killebrew’s favorite feature, and he had to give it up.

In early 2008 ATI realized they had to cut this chip down from 20 - 22mm on a side to 18mm, everyone had to give up something. Carrell was the big advocate for making 870 smaller, he couldn’t be a hypocrite and not give anything up.

A bunch of my conversation with Carrell at this point had to go off the record. Sideport would have been useful in RV870, but it’s unfortunately not there. Although he did tell me not to be surprised if I saw Sideport again at some point. Carrell doesn’t give up easily.

Adjusting Trajectory & Slipping Schedule What Made it All Ok: 4 GPUs in < 6 Months
Comments Locked

132 Comments

View All Comments

  • AdiQue - Sunday, February 14, 2010 - link

    I fully subscribe to point raised by a few previous posters. Namely, the article being such a worthy read, it actually justifies the creation of an account for the sheer reason of expressing appreciation to your fantastic work, which does stand out in the otherwise well saturated market of technology blogs.
  • geok1ng - Sunday, February 14, 2010 - link

    "I almost wonder if AMD’s CPU team could learn from the graphics group's execution. I do hope that along with the ATI acquisition came the open mindedness to learn from one another"

    it would be a true concern if based on mere observation, but the hard facts are soo much terrible: AMD fired tons of ATI personnel, hence ATI drivers are years behind NVIDIA- we are still begging for centered timings on ATO cards, a feature that NVIDIA offers 6 generations past! ATI produces cards that are gameless. DirectX 10.1?! There was a single game with DirectX 10.1 support, and NVIDIA made the game developer REMOVE DirectX 10.1 features with a game patch that "increased" performance. DirectX 11?! ATI has to put money on driver developing team and spend TONS of cash in game developing.

    I would be a happier costumer if the raw performance of my 4870X2 was paired with the seamless driver experience of my previous 8800GT.

    And another game that AMD was too late is the netbook and ultralow voltage mobile market. A company with the expertise in integrated graphics and HTPCs GPUs with ZERO market share on this segment?! give me a break!
  • LordanSS - Monday, February 15, 2010 - link

    Funny... after the heaps of problems I had with drivers, stability and whatnot with my old 8800GTS (the original one, 320MB), I decided to switch to ATI with a 4870. Don't regret doing that.

    My only gripe with my current 5870 is the drivers' and the stupid giant mouse cursor. The Catalyst 9.12 hotfix got rid of it, but it came back on the 10.1.... go figure. Other than that, haven't had problems with it and have been getting great performance.
  • blackbrrd - Monday, February 15, 2010 - link

    I think the reason he had issues with the X2 is that it's a dual card. I think most gfx card driver problems comes from dual cards in any configuration (dual, crossfire, sli)

    The reason you had issues with the 320mb card is that it had some real issues because of the half-memory. The 320mb cards where cards originally intended as gtx cards, but binned as gts cards that again got binned as 320mb cards instead of 640mb cards. Somehow Nvidia didn't test these cards good enough.
  • RJohnson - Sunday, February 14, 2010 - link

    Please get back under your bridge troll...
  • Warren21 - Sunday, February 14, 2010 - link

    Are you kidding me? Become informed before you spread FUD like this. I've been able to choose centered timings in my CCC since I've had my 2900 Pro back in fall 2007. Even today on my CrossFire setup you can still use it.

    As for your DX10.1 statement, thank NVIDIA for that. You must remember that THEY are the 600lb gorilla of the graphics industry - I fail to see how the exact instance you cite does anything other than prove just that.

    As for the DX11 statement, if NVIDIA had it today I bet you'd be singing a different tune. The fact that it's here today is because of Microsoft's schedule which both ATI and NVIDIA follow. NV would have liked nothing more than to have Fermi out in 2009, believe that.
  • Kjella - Sunday, February 14, 2010 - link

    "AMD fired tons of ATI personnel, hence ATI drivers are years behind NVIDIA-"

    Wow, you got it backwards. The old ATI drivers sucked horribly, they may not be great now either but whatever AMD did or didn't do the drivers have been getting better, not worse.
  • Scali - Sunday, February 14, 2010 - link

    It's a shame that AMD doesn't have its driver department firing on all cylinders like the hardware department is.
    The 5000-series are still plagued with various annoying bugs, such as the video playback issues you discovered, and the 'gray screen' bug under Windows 7.
    Then there's OpenCL, which still hasn't made it into a release driver yet (while nVidia has been winning over many developers with Cuda and PhysX in the meantine, while also offering OpenCL support in release drivers, which support a wider set of features than AMD, and better performance).
    And through the months that I've had my 5770 I've noticed various rendering glitches aswell, although most of them seem to have been solved with later driver updates.
    And that's just the Windows side. Linux and OS X aren't doing all that great either. FreeBSD isn't even supported at all.
  • hwhacker - Sunday, February 14, 2010 - link

    I don't log in and comment very often, but had to for this article.

    Anand, these type of articles (Rv770,'Rv870',and SSD) are beyond awesome. I hope it continues for Northern Islands and beyond. Everything from the RV870 jar tidbit to the original die spec to the SunSpotting info. It's great that AMD/ATi allows you to report this information, and that you have the journalistic chops to inquire/write about it. Can not provide enough praise. I hope Kendell and his colleagues (like Henri Richard) continue this awesome 'engineering honesty' PR into the future. The more they share, within understandable reason, the more I believe a person can trust a company and therefore support it.

    I love the little dropped hints BTW. Was R600 supposed to be 65nm but early TSMC problems cause it revert to 80nm like was rumored? Was Cypress originally planned as ~1920 shaders (2000?) with a 384-bit bus? Would sideport have helped the scaling issues with Hemlock? I don't know these answers, but the fact all of these things were indirectly addressed (without upsetting AMD) is great to see explored, as it affirms my belief I'm not the only one interested in them. It's great to learn the informed why, not just the unsubstantiated what.

    If I may preemptively pose an inquiry, please ask whomever at AMD when NI is briefed if TSMC canceling their 32nm node and moving straight to 28nm had anything to do with redesigns of that chip. There are rumors it caused them to rethink what the largest chip should be, and perhaps revert back to what the original Cypress design (as hinted in this article?) for that chip, causing a delay from Q2-Q3 to Q3-Q4, not unlike the 30-45 day window you mention about redesigning Cypress. I wonder if NI was originally meant to be a straight shrink?
  • hwhacker - Sunday, February 14, 2010 - link

    I meant Carrell above. Not quite sure why I wrote Kendell.

Log in

Don't have an account? Sign up now