Resident Evil 5

As is often the case with console ports, the latest installment of Capcom’s popular survival horror series is not particularly GPU starved, and can crank out high numbers on just about anything.

The 5770 goes back to losing, but this time it’s only by a few percent. The GTX 260 wins here yet again though.

It’s another win for the 5750 though; 6-10%. It and the GTS 250 are virtually indistinguishable above 1680.

Finally, another $100 on a 5850 buys you 40%-50% more performance.

Dawn of War II Batman: Arkham Asylum
Comments Locked

117 Comments

View All Comments

  • endlesszeal - Tuesday, October 13, 2009 - link

    sorry, if this seems newbest since im still using DVI. anyway, i did a quick peak at apples site and only saw minidp to dvi dongle. however, i jumped over to monoprice and found this:

    http://www.monoprice.com/products/product.asp?c_id...">http://www.monoprice.com/products/produ...1&p_...

    would that work?
  • Xajel - Tuesday, October 13, 2009 - link

    Nope this wont work, the card(s) has only two TMDS's for one DVI and one DVI or HDMI, you can't use two DVI's + HDMI...

    if you want to connect the third monitor you have to use Display Port, and adapters won't work since DP on this card doesn't support DVI single Pass through ( this will need a seperated TMDS chip )

    there's some devices that support DVI/HDMI pass throught using DisplayPort, I'm talking about Apple latest Mac's where they dropped DVI/HDMI and replaced it with DP... that one supports DVI/HDMI adapters as it has it's own TMDS chip which is required for DVI/HDMI signals...
  • elfick - Tuesday, October 13, 2009 - link

    Monitors with HDMI seem fairly common and DP-HDMI adapters appear to be cheap. Could you do DP-HDMI, HDMI, and DVI for a triple monitor setup?
  • Ryan Smith - Tuesday, October 13, 2009 - link

    DP-HDMI is still a passive converter, so it still won't work.
  • Ryan Smith - Tuesday, October 13, 2009 - link

    No, it has to be an active (powered) adapter. You can tell if one is active if it has a USB plug, since that's where they're drawing power from.
  • Minion4Hire - Tuesday, October 13, 2009 - link

    It has to be powered if you wish to run dual-link DVI. The single-link MonoPrice adapter will work fine for resolutions up to 1920x1200. But most people looking to run Eyefinity will probably be wanting to go whole-hog with 2560x1600 given the large price tag already associated with such a setup.
  • kzig - Thursday, October 29, 2009 - link

    If I want to run 3 1280 x 1024 monitors together as 3840 x 1024 in Eyefinity, will I need an active adapter, or can I use a cheaper passive one?
  • BladeVenom - Tuesday, October 13, 2009 - link

    The Apple one is poorly rated. Dell has one, but it to is $100. And just to rerepeat that, it has to be an active adapter. http://accessories.us.dell.com/sna/products/Cables...">http://accessories.us.dell.com/sna/prod...us&l...
  • Ryan Smith - Tuesday, October 13, 2009 - link

    I was going to respond to this, but Xajel took the words out of my mouth. Just read his post, it explains why an active adapter is required.
  • bijeshn - Tuesday, October 13, 2009 - link

    Phasing out the 4870 is a bad idea. With time I look forward to the 4870 dropping even lower in price...

Log in

Don't have an account? Sign up now