Zotac’s Ion in My Theater

Last year I spent a lot of time building a home theater. All content is played back on my HTPC running Windows Vista Media Center along with MyMovies (to catalog my library) and VMC Media Browser to tidy up the interface. The hardware is composed of an ATI Radeon HD 4550 as well as an Intel Core 2 Quad Q9650. The result works pretty well. I wanted to see how close the Zotac Ion could get to my setup.

With an external power supply I didn’t have to do much, I just grabbed the Zotac board and the power brick, set the two on top of my equipment rack and plugged it in. I immediately appreciated the silence of the Zotac, as quiet as I’ve made my HTPC, it’s still not totally silent. That doesn’t usually matter while I’m watching a movie, but whenever I pick the seat closest to the equipment rack it irks me a bit (similar to how you can always notice even the most minor scratches on your car).

Actual video playback wasn’t an issue, the Zotac board already passed all of my Blu-ray tests if you’d remember. And I rip all of my content so CPU usage never even went beyond 20%. What I wanted to know was how well the Zotac board could handle navigating through my library, the VMC menus, etc...

I for sure thought that the Atom was too slow to serve as a real HTPC. Sure you could watch movies on it, but actually navigating through your library using a pretty UI - no way.

I must admit, I was pleasantly surprised.


Quantum of Solace - 1080p - 11' screen - all powered by Zotac's Ion

The Zotac Ion was by no means fast at navigating through the Media Browser interface, but it was acceptable. Scrolling through tens of movies is a bit painful, make it hundreds and you may want to consider a faster CPU, but it wasn’t nearly as bad as I expected.


The VMC Media Browser interface, slow, but usable on the Ion

During playback I could pause, skip forward and adjust volume without dropping any frames. The Ion worked as a real HTPC doing real duty. I was impressed. Pair it up with a TB hard drive and you have a great way of watching your content on your TV or projector. Use a NAS and you can even keep all the noise out of your theater room.

Performance aside, remember that this is a GeForce 9300 we’re talking about here. I had a single HDMI cable going to my receiver which carried 1080p video, DD or DTS 5.1 audio or 8-channel LPCM if I decided to let my machine do all of the decoding. I didn’t test CPU utilization on the latter due to time constraints but I plan to in the near future.

Blu-ray Playback: It Works Quite Well Putting It in Perspective: The Atom Takes on a Single-Core Pentium 4
Comments Locked

93 Comments

View All Comments

  • ahmshaegar - Tuesday, May 12, 2009 - link

    Greater power consumption = more heat. Where's that energy going to go?
  • marshylucas - Tuesday, May 12, 2009 - link

    You were faster, I was about to reply something similar.

    Thumbs up for the fanless design!
  • Jeffk464 - Tuesday, May 12, 2009 - link

    Yes, but my laptop is very quiet, even with being severely limited on space for a heat sink and fan. If you had more rooms to put a large heat sink on it with a large low rpm fan, I think it would be near silent.
  • trabpukcip - Friday, May 15, 2009 - link

    A laptop does not make the best HTPC though. Connectivity is too limited and is generally inconvenient.
  • GeorgeH - Tuesday, May 12, 2009 - link

    "a single Gigabit Ethernet port (just like on the Intel boards)"

    Actually, only the D945GCLF2 has Gigabit Ethernet. The D945GCLF is stuck with 10/100, which is kind of a deal killer for me.
  • Anand Lal Shimpi - Tuesday, May 12, 2009 - link

    Thanks for the correction :)

    Take care,
    Anand
  • DrLudvig - Tuesday, May 12, 2009 - link

    I'm confused here, most places it says that the hole ION thing is a 9400 chip, while some other places, like now here, says 9300?
    What is it really?
  • Anand Lal Shimpi - Tuesday, May 12, 2009 - link

    The 9300 and 9400 are the same chip, the difference is GPU clock. Take a look at the table on this page:

    http://www.anandtech.com/mb/showdoc.aspx?i=3432">http://www.anandtech.com/mb/showdoc.aspx?i=3432

    The GF9300 on the Zotac board actually runs a bit slower than the stock GeForce 9300. It runs its core at 450MHz and its shaders at 1.1GHz instead of 450/1.2.

    Take care,
    Anand
  • Badkarma - Tuesday, May 12, 2009 - link

    Anand,

    Can you please confirm/deny if the Zotac Ion boards support wake-on-usb? The Zotac 9300 mini-itx board does not support wake-on-usb and therefore powering the system on from standby from the MCE remote does not work without physical workarounds.

    Thanks.
  • Anand Lal Shimpi - Tuesday, May 12, 2009 - link

    I'm out of the office right now but I'll try it this weekend :) Drop me an email to remind me if you don't see something by the end of next week :)

    Take care,
    Anand

Log in

Don't have an account? Sign up now