Fallout 3 Game Performance

Bethesda’s latest game uses an updated version of the Gamebryo engine (Oblivion). This benchmark takes place immediately outside Vault 101. The character walks away from the vault through the Springvale ruins. The benchmark is measured manually using FRAPS.

Fallout 3 - 1680 x 1050 - Medium Quality

The Phenom II is finally a competitive gaming CPU, that's from top to bottom now.

Left 4 Dead

Left 4 Dead - 1680 x 1050 - Max Settings (No AA/AF/Vsync)

Left 4 Dead performance is also very competitive, AMD does quite well here.

Blender, Sony Vegas, Excel, Sorenson & WinRAR Performance FarCry 2 and Crysis Warhead Gaming Performance
Comments Locked

77 Comments

View All Comments

  • just4U - Monday, February 9, 2009 - link

    I think you were a bit optimistic in your prediction that DDR3 will be at price parity with DDR2 by years end but otherwise a good review.

    I do have a question tho as I am not 100% sure on it. The cpu's that were launched in January (920/40). Are they also compatable with DDR3 boards? Or just these new cpu's?
  • faxon - Friday, May 1, 2009 - link

    really? because right now newegg is selling a 2x2GB kit of Gskill cas9 1600 for $59, and the like kit of DDR2 cas5 is only $56. all we need now is for latency on the ram to drop at the same low voltages seen on i7 kits and i would call that price parity, not that you will even really notice the latency difference except in synthetic benchmarks anymore
  • DrMrLordX - Monday, February 9, 2009 - link

    To the best of my knowledge, AM2 and AM2+ Phenom/Phenom IIs will not support DDR3. Their memory controllers just can't hack it.
  • hyc - Monday, February 9, 2009 - link

    How so? Barcelona/Phenom-I already had the dual memory controllers, they were just never enabled on any motherboards.
  • Targon - Monday, February 9, 2009 - link

    For DDR3 support you need a DDR3 supporting CPU. From the sound of it, the processors are the socket AM3 type, meaning they will work in both socket AM2+ and socket AM3 motherboards. If a processor is for socket AM2/AM2+, it will NOT work in a DDR3 motherboard.

    The way it works is simple, the DDR3 versions of the processor have both DDR2 and DDR3 memory controllers, so will work with either type of memory. The DDR2 processors(X4 940 and 920) only have a DDR2 memory controller(it is dual channel, but that isn't the same as supporting both memory types), so will only work in a socket AM2 or AM2+ motherboard.

    The X4 945 and 925(I think) will be the DDR3 supporting versions of the current chips.

    Again, you can NOT put a socket AM2+ chip in a DDR3 board, it won't work(pin is blocked in the socket to avoid frying the chip). Even if you could put the chip in a DDR3 board, without the DDR3 memory controller on the CPU, it just would not work.
  • grb1212 - Tuesday, March 16, 2010 - link

    your not totally right if u have a am2/am2+/am3 compatible board and it uses ddr3 if u use a ddr2 compatible processor ddr3 will work with a ddr2 processor but it will act like ddr2 memory as far ass performance
  • TheFace - Monday, February 9, 2009 - link

    This may help.

    http://www.tomshardware.com/reviews/socket-am3-phe...">http://www.tomshardware.com/reviews/socket-am3-phe...

    The chips released today seem to be the only ones that work in AM3. But the chips released today will also work in AM2/AM2+. It's just, as has been stated repeatedly, the chips designed for AM2/AM2+ won't work in AM3.

Log in

Don't have an account? Sign up now